|
User Manual for ESE 2.3" 6-Digit Timecode Reader Click to enlarge the picture
Contents of the user manual for the ESE 2.3" 6-Digit Timecode Reader
- Product category: Time Code Generators & Readers ESE
- Brand: ESE
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for ESE Time Code Generators & Readers
|
User manual for the ESE 2.3" 6-Digit Timecode Reader contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any ESE product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official ESE user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a ESE product will considerably shorten its lifespan!
|
Product description The 2.3" 6-Digit Timecode Reader from ESE is designed to auto-detect, read, and display either SMPTE, EBU, ASCII, or ESE timecode. Time is displayed as hours, minutes, and seconds. In the event the reader receives an erroneous timecode, then it continues to count. An error indicator (located to the right of the hours display) lights up when a bad code is detected. This feature can be turned OFF via an internal DIP switch (#3, bank 1). This reader is available with a LED display measuring 2.3" in height.The units receiving SMPTE (drop frame or non-drop frame) or EBU are also able to display date encoded user bits. An internal DIP switch (#1, bank 1) allows the unit to display this data (month-day-year format). The Switch #2, bank 1 enables the day-of-year mode in which the date is displayed as day-of year (1-366). The 12HR DIP switch (#4, bank 1) allows the unit to display in 12-hour format. When in 12 hour mode, a PM indicator (located to the right of the seconds display) lights up during the PM hours.The units receiving ESE can accept ESE timecode (TC76, TC89, TC90) or ESE timercode. The units receiving ESE timecode display hours, minutes, and seconds. The units receiving ESE timecode display minutes and seconds, and if the Generator outputs tenths of seconds data and the reader has 6 digits, then the unit displays minutes, seconds, and tenths of seconds (99 : 59 . 9). The 12/24 DIP switch (#4, bank 1) allows the unit to display time in either 12 or 24 hour format. (If the unit is receiving TC76 in the 12-hour format, then only the 12 hour mode is available.) When in 12 hour mode, a PM indicator (located to the right of the seconds display) lights up during the PM hours. The date DIP switch (#1, bank 1) allows the unit to display date information, if receiving TC90 (month-day-year format for 6-digit units. The switch #2, bank 1 enables day-of-year mode in which the date is displayed as day-of-year (1-366).The units receiving ASCII display hours, minutes, and seconds unless format B is being received. These units accept RS-232C, RS-422A or RS-485 voltage levels at 9600 baud. Formats A, B, 0, or 1 can be decoded by the reader.The LX units use a male DB-9 connector for the ASCII interface, instead of a female DB-9 connector. The pin designations remain the same however. This should be considered while purchasing a cable for use with a LX unit. In the Box ESE 2.3" 6-Digit Timecode Reader Limited 5-Year Warranty on Parts & Labor Table of Contents
|
Upload User Manual
Have you got an user manual for the ESE 2.3" 6-Digit Timecode Reader in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersESE ES 996U Specs | Connector | Terminal Block | | Display | 6-Digit, 2.3" Red | | Power | 10 W | | Time Code | SMPTE: 100 mVpp to 5 Vpp, 120 kΩ input impedance, balanced or unbalanced, play speed
EBU: 100 mVpp to 5 Vpp, 120 kΩ input impedance, balanced or unbalanced, play speed
ESE: 120 kΩ, unbalanced, ESE Time or Timecode
ASCII: 9600 Baud, 1 Start, 8 Data, 1 Stop, No Parity (RS-232C or RS-422A/RS-485) The data is output by the Generator Clock is in a 24-hour time format. The time may be offset to a local time by setting the time zone switches to the appropriate value. | | Electrical Requirements | 117 VAC, 50/60 Hz | | Dimensions (H x W x D) | 5.0 x 15.0 x 3.5" (12.7 x 38.1 x 8.8 cm)
Mount: 13.7" (34.7 cm) | | | | Package Weight | 5.3 lb | | Box Dimensions (LxWxH) | 15.0 x 5.2 x 3.4" |
Rating90% users recommend this product to others. And what about you?
This product has already been rated by 23 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
pocket quadcopter RIV-YT320...
CYBERPOWERPC GMA6200BSTV2...
FUJINON ERD-30A-D01A ZOOM DEMAND CONTROLLER
...
Just bought from Bestbuy Cyberpower,GMA5600BSTV4,model C series
another number on the label ET8252-10294
CECModel:CS450217MB492126 mfg date 043025
...
Vortex crossfire ii 6-24x50
I essentially want to return my scope to mechanical zero. This has been on a couple rifles and I would like to set f...
|
|
