User Manual for ETC Desire D60XTI Lustr Front Light Wash Fixture Click to enlarge the picture
Contents of the user manual for the ETC Desire D60XTI Lustr Front Light
- Product category: Stage & Studio ETC
- Brand: ETC
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for ETC Stage & Studio
|
User manual for the ETC Desire D60XTI Lustr Front Light contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any ETC product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official ETC user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a ETC product will considerably shorten its lifespan!
|
Product description The black, Desire D60XTI Lustr+ Front Light Wash Fixture from ETC uses 6 color LED plus a high-intensity white LED to provide a full range of variable color with an emphasis on lighter colors and white. A 15-bit dimming engine provides smooth, high-quality theatrical fades locally or via DMX, while minimizing color shift and flicker at any light level. The all-metal die-cast body has built-in filter slots that permit use of optional lenses to change the D60XTI's native 17-degree field angle from very narrow to extra wide. Its IP66 weather-resistant rating allows you to place the D60XTI indoors or outdoors wherever it's needed. The D60XTI's fan-free, convection cooling design is especially valuable in noise-sensitive environments; and thanks to its multi-voltage power supply, it's ready for worldwide use. - General
-
- Easy setup via any RDM device, such as ETC Gateways and Gadget
- 60 LED variable color-mixing light wash luminaire
- CE compliant, ETL listed to UL1598
- IP66-rated for exterior wet-location use
- Data termination board for easy installation (included)
- Physical
-
- Rugged die-cast all-metal housing
- Accessory ring for installation of secondary lenses
- Hanging yoke standard
- Cable diameter: power 0.36"/ data 0.34"
- Effective Projected Area (EPA): 0.95
- Electrical
-
- 100 to 240VAC, 50/60Hz universal power input
- Waterproof, 72" outdoor-rated power lead
- Up to 10 fixtures (15A max) may be fed on the same circuit
- Inrush - 120V: 46A (first half-cycle), 240V: 77A (first half-cycle)
- LED
-
- 50,000-hour LED life (50,000 hours to 70% intensity)
- 60 Luxeon Rebel LED emitters
- Color
-
- Exclusive x7 color system seven-color LED array
- Broad spectrum color interacts seamlessly with conventional sources
- Beautifully illuminates skin tones and other objects for a natural appearance and high color rendering
- Exclusive red-shift option emulates tungsten dimming performance luminaires)
- Optical
-
- Primary field angle of 17°
- Secondary lenses available for multiple beam spread options
- Control
-
- DMX512 in and thru via termination board (included)
- Various DMX profiles ranging from simple RGB control to nine-channel direct color and intensity control
- Plus 7 allows for direct control of each color channel when using RGB, HSI, HSIC, or Studio profiles
- 15-bit virtual dimming engine provides smooth, high-quality theatrical fades and minimizes color shift during dimming
- RDM functionality for address and setting changes
- Thermal
-
- Ambient operating temperature of -4° to 104°F (-20° to 40°C)
- Active electronic thermal management for droop-free operation
- Noiseless, fan-free convection cooling for acoustically sensitive installations
- Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free-flow of air around fixture housing
In the Box ETC Desire D60XTI Lustr+ Front Light Wash Fixture Data Termination Board Limited 2-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the ETC Desire D60XTI Lustr Front Light Wash Fixture in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersETC D60XTI Lustr Specs | Light Source | 60 x single-color 2.5W LEDs | | Life Expectancy | 50,000 hours (LD70) | | Beam Angle | 8° | | Field Angle | 17° | | Illuminance | At 10' (3.0 m): 19,676 lux
At 15' (4.6 m): 8,745 lux
At 25' (7.6 m): 3,148 lux | | Dimmer Type | Electronic | | Dimmer Curves | Yes | | Color Mixing | Red, green, blue, white, amber, cyan, indigo | | Color Accuracy | At 5600 K: CRI: 93, CQS: 92, color fidelity: 90
At 3200 K: CRI: 89, CQS: 90, color fidelity: 91 | | Color Temperature | 3200 - 5600 K | | DMX | Yes | | Input Voltage | 100 - 240 VAC, 50/60 Hz | | IP Rating | IP66, outdoor, wet location use | | Cooling | Convection | | Material | All-metal, die cast housing | | Mount | Yoke | | Operating Temperature | Ambient operating temperature of -4° to 104°F (-20° to 40°C) | | Dimensions | 11.3 x 12.15 x 14.21" (287 x 309 x 361 mm) | | Weight | 23 lb (10.43 kg) |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 05 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
