|
User Manual for ETC Two-Port DMX RDM Input Touring Gateway Click to enlarge the picture
Contents of the user manual for the ETC Two-Port DMX RDM Input Touring
- Product category: DMX Devices ETC
- Brand: ETC
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for ETC DMX Devices
|
User manual for the ETC Two-Port DMX RDM Input Touring contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any ETC product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official ETC user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a ETC product will considerably shorten its lifespan!
|
Product description Reap the benefits of networking your lighting with the DMX/RDM Two-Port Gateway from ETC. Connected via Ethernet to a network switch, just like all other devices in the network, the gateway uses two 5-pin XLR inputs to communicate with two lines of up to 32 DMX-compatible devices each, supporting a full DMX512 universe on each line. Remote Device Management (RDM) allows for bi-directional communication between your controller and any RDM-compliant devices in your setup without getting in the way of standard DMX devices that do not recognize the RDM protocol.
The Gateway can be powered by PoE via the network connection, or by use of an external DC power supply (available separately). Use a standard two-gang back box (available separately) for flush-mounting, or the included ETC connectorized surface-mount back box for touring installations. - Supports Net3 protocol powered by ACN
- LCD displays labeling, status, and configuration information
- Power and network activity LED indicators
- Configurable using Network Software utility (GCE/NCE) or directly from ACN
- Termination switches on rear panel
In the Box ETC Two-Port DMX/RDM Input Touring Gateway Hanging Bracket Connectorized Back Box Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the ETC Two-Port DMX RDM Input Touring Gateway in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersETC N32G Specs | | | Ports | 2 x 5-pin XLR male input
Up to 512 DMX addresses per port | | Fault Voltage | Withstands up to 250 VAC | | Termination | Integrated DMX/RDM termination | | | | Power Consumption | 5 W (max) | | External Power Supply | 8 to 28 VDC | | | | Maximum Delay Time | Not greater than one packet time (input to output) | | Refresh Rate | Up to 40 Hz | | | | Data Distribution | DMX over Ethernet | | Certification | CE, RoHS, ETL-listed | | | | Material | 16-gauge cold-rolled steel
Casing: Scratch-resistant powder-coat finish | | Other Ports | 1 x RJ45
1 x 2-pin DC power input | | Indicators & Controls | Menu button
Reset button
Power and data indicators | | LCD Display | Gateway identification
Network configuration
DMX port configuration
DMX port status
RDM configuration | | | | Supports | Net3/ACN (ANSI E1.31 and E1.17)
RDM (ANSI E1.20)
USITT DMX512-A (ANSI E1.11) | | Compliant | USITT DMX512 and ANSI E1.11 DMX512-A
IEEE 802.3i for 10BASE-T, 802.3u for 100BASE-TX, and 802.3af for PoE | | | | Operating Temperature | 32 to 104°F (0 to 40°C) | | Storage Temperature | -40 to 158°F (-40 to 70°C) | | Humidity | 5 to 95%, non-condensing | | | | Dimensions | 6.47 x 4.88 x 5.41" (16.43 x 12.40 x 13.74 cm) | | Weight | 3.9 lb (1.8 kg) |
Rating60% users recommend this product to others. And what about you?
This product has already been rated by 29 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
NEWER F100 CAMERA MONITOR...
PhotoStage progessional...
powerpint...
Night Detective Quest 5M 5x Night Vision Monocular ...
Ibanez AM93QM User Manual....
|
|
