|
User Manual for FlashForge Dreamer 3D Printer Click to enlarge the picture
Contents of the user manual for the FlashForge Dreamer 3D Printer
- Product category: 3D Printers FlashForge
- Brand: FlashForge
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for FlashForge 3D Printers
|
User manual for the FlashForge Dreamer 3D Printer contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any FlashForge product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official FlashForge user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a FlashForge product will considerably shorten its lifespan!
|
Product description The Dreamer 3D Printer from Flashforge allows you to create three-dimensional prints from up to two colors and materials, up to a build volume of nearly 300 cubic inches. Mix and match colors in ABS, PLA, or water-soluble PVA filament to create prints in resolutions as fine as 100 microns, or in rougher 400-micron layers when a quicker, less intricate result is required.
Send your prepared 3D files to the Dreamer via USB, Wi-Fi, or SD card, and navigate the menu via its 3.5" multi-language touchscreen. The enclosed build chamber insulates heat, creating an ideal environment for ABS printing. When printing with PLA, open the glass door to provide ventilation. Dissolvable PVA filament is also compatible with the Dreamer, and can be used for printing filler or support structures that can then be easily removed post-printing without tools.
The Dreamer's built-in filament chambers ensure your filament is fed to the extruders smoothly and without winding errors. Your Dreamer 3D printer comes fully-assembled with a build plate that does not require calibration, two spools of filament, and a 4GB SD Card, so you can begin printing right out of the box. - Dual-Color & Multi-Material
- Maximize the Dreamer's capabilities by using two colors to create colorful prints in a variety of combinations. Switch from ABS to PLA materials depending on your needs, and use dissolvable PVA filament to build support or filler structures that you can then easily remove post-printing by immersing in water.
- Multiple Connectivity Options
- Transfer your completed designs to the Dreamer via USB cable, SD card, or Wi-Fi.
- Multiple Resolutions
- Choose a slower, finer resolution setting when building intricate, detailed models at up to 100-micron layer accuracy. Select faster, draft-like conditions as coarse as 500 microns per layer when you require a rougher, less accurate print.
- LED Strip Lighting
- User-defined LED strip lighting lines the interior of the Dreamer for increased visibility. You'll be able to see your 3D models come to life at every step.
UPC: 737557590110 In the Box FlashForge Dreamer 3D Printer 1 kg Spool of ABS Filament 1 kg Spool of PLA Filament 4GB SD Card Limited 3-Month Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the FlashForge Dreamer 3D Printer in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersFlashForge 3D-FFG-DREAMER Specs | Print Technology | Fused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM) | Build Volume | 9.1 x 5.9 x 5.5" / 23.1 x 14.99 x 14.0 cm | Number of Extruders | 2 | Layer Resolution | XY Axis: 100 to 500 micron / 0.1 to 0.5 mm (5 Settings) | Supported Extruder Nozzle Diameter | 400 micron / 0.4 mm | Positioning Precision | XY Axis: 2.5 micron / 0.0025 mm Z Axis: 11 micron / 0.011 mm | Filament Compatibility | 1.75 mm Diameter: ABS, PLA, PVA | | Build Area Type | Enclosed | Build Plate Features | Auto Leveling, Heated | Build Plate Temperature | 32 to 248°F / 0 to 120°C | Filament Spool Storage | Internal | 3D Scanner | No | Monitoring Camera | No | | Wi-Fi | None | Media Card Slots | Yes | | Supported 3D File Types | .gcode, .gx, .obj, .proj, .stl, .x3g | | AC Input Power | 115 to 230 VAC, 50 / 60 Hz | Operating Temperature | 60 to 90°F / 15 to 32°C | Storage Temperature | 32 to 100°F / 0 to 37°C | Dimensions (W x H x D) | 12.6 x 18.4 x 15" / 32 x 46.74 x 38.1 cm | Weight | 34 lb / 15.4 kg | | Package Weight | 38.0 lb | Box Dimensions (LxWxH) | 22.126 x 21.102 x 16.929" |
Rating84% users recommend this product to others. And what about you?

This product has already been rated by 07 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
pocket quadcopter RIV-YT320... CYBERPOWERPC GMA6200BSTV2... FUJINON ERD-30A-D01A ZOOM DEMAND CONTROLLER
... Just bought from Bestbuy Cyberpower,GMA5600BSTV4,model C series
another number on the label ET8252-10294
CECModel:CS450217MB492126 mfg date 043025
... Vortex crossfire ii 6-24x50
I essentially want to return my scope to mechanical zero. This has been on a couple rifles and I would like to set f...
|
|