|
User Manual for FREEFLY MōVI Pro Stabilizer Kit with Ready Rig GS and ProArm Click to enlarge the picture
Contents of the user manual for the FREEFLY MōVI Pro Stabilizer Kit with
- Product category: See All Gimbal Stabilizers FREEFLY
- Brand: FREEFLY
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for FREEFLY See All Gimbal Stabilizers
|
User manual for the FREEFLY MōVI Pro Stabilizer Kit with contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any FREEFLY product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official FREEFLY user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a FREEFLY product will considerably shorten its lifespan!
|
Product description The FREEFLY MōVI Pro Stabilizer Kit with Ready Rig GS and ProArm from gives you full camera stabilization for long-form shooting and event videography. Adapt the MōVI to the Ready Rig using the included adapters and you can comfortably hold the rig for extended periods of time. The rig itself also helps to comfortably place the stabilizer in front of you for shooting high or low. See more information on the individual pieces of this kit below. - FREEFLY MōVI Pro Handheld Bundle Get up and ready to shoot smooth handheld footage with FREEFLY's MōVI Pro Handheld Bundle. Consisting of the MōVI Pro motorized gimbal stabilizer, MōVI Ring Pro handle, and the MIMIC controller, this kit can perform in either single or dual-operator configurations.The MōVI Pro motorized gimbal stabilizer steadies cameras weighing up to 15 pounds, rendering it compatible with mirrorless cameras all the way up to smaller cinema cameras. With the included batteries, the camera and essential accessories can be powered without adding any bulk to the MōVI Pro. By offering a unified design, the MōVI Ring Pro lets the camera operator grip the attached MōVI Pro from nearly any angle. Since the design also goes above and below the stabilizer itself, high and low shots are easily accomplished with minimal stretching on the part of the camera operator. For dual-operator configurations, the MIMIC syncs with the MōVI Pro, allowing one operator to control the camera movements while a second operator moves the camera rig. The MIMIC has Bluetooth and 2.4 GHz radios built-in for device and accessory communication. Additional control can be achieved with the included Bush Pilot Auxiliary Control Knob. When connected to the MIMIC, the Bush Pilot can actuate focus, zoom, or iris, depending on how you have it set up.
MōVI Pro Digital 3-Axis Camera Stabilizer - Innovative structural design for ease of use, convenience, strength, and versatility
- Dual hot-swappable 22.5V 1.8Ah batteries with status indicators
- Integrated focus/iris/zoom controller
- Embedded screen for tuning/customization
- Increased motor torque over previous generation stabilizers
- D-Tap outputs for camera and accessory power
- Full stiffness and filter auto-tune in approximately 10 seconds
- Compatible with MōVI Pro applications for iOS and Android
- Dual GPS (top and bottom) for solid signal in Sky or GroundView
- Full RED RCP integration (focus, iris, ISO, start/stop, and more)
- Internal long range 2.4 GHz frequency hopping radio for connection to MIMIC
- Compatible with separately available Low Profile Handle and Classic Handle
MōVI Ring Pro - 30mm lightweight carbon fiber tubing
- Adjustable/removable handstops
- Fiber-reinforced molded plastic feet
- One-hand adjustable quick release monitor mount
MIMIC - Integrated battery with six-hour runtime
- Long-range wireless operation
- USB and Bluetooth connectivity
- Quick release and 1/4"-20 mounting options
Bush Pilot Auxiliary Control Knob - Controls focus, iris, or zoom through the MIMIC
- High-resolution encoder for precise adjustments
UPC: 742574248449 - Ready Rig Ready Rig GS Stabilizer + ProArm Kit with Case Use the Ready Rig GS Stabilizer + ProArm Kit to transfer the weight of a gimbal-mounted camera away from an operator's arms and shoulders. By redistributing the load to the user's hips and core, this rig enables you to extend your shooting time and lessens operator fatigue. It also reduces the bounce motion sometimes seen during handheld gimbal shots. The Ready Rig GS Stabilizer works with any gimbal in standard or underslung mode.The Ready Rig ProArms increase the basic GS Stabilizer's load range from 30 to 40 pounds. They telescope from 23 to 37", producing an effective boom range of 55". For greater operating convenience, the ProArms also feature 1/4"-20 and 3/8-16" threads, enabling you to mount an onboard monitor to either arm.The Ready Rig GS with ProArms features a load capacity range of 1 to 40 pounds, carbon fiber support arms, and an aluminum frame. Its slim, compact profile suits it for use in tight spaces and car interior shots. A soft, zippered carrying case is included with this kit.
- Supports any gimbal or camera rig from 1 to 40 pounds
- Adjustable arms telescope from 23 to 37", with an effective boom range of 55"
- An onboard monitor can be mounted to the 1/4"-20 or 3/8"-16 threads on each arm
- Provides vertical axis stabilization while reducing operator fatigue
- Slim, lightweight design with carbon fiber support arms and aluminum components
- Operate gimbal in over- or underslung configuration
- A soft, zippered carrying case is included in the kit
UPC: 869681000026 - DJI Quick-Connect Adapter for Ronin 2 to Ready Rig (Pair) Get ready to capture stunning cinematic handheld shots by mounting your Ronin 2 onto your Ready Rig with this pair of Quick-Connect Adapters from DJI. These mounting adapters connect the Ready Rig to the grip of the Ronin 2 stabilizer or to another device with a 25 or 30mm tube. UPC: 190021303041
In the Box - MōVI Pro Handheld Bundle zabyzrufedecdfwqfadrswxfsz
- MōVI Pro Motorized Gimbal Stabilizer
- MōVI Ring Pro
- MIMIC
- Bush Pilot Auxiliary Control Knob
- 2 x MōVI Pro Battery Pack 1.8Ah
- 2 x MōVI Pro Battery Charger
- COM to FRX Cable
- MōVI Pro Accessory Bag
- MōVI Rod Mount Adapter
- Assembly Tools and Parts
- Limited 1-Year Warranty
- Ready Rig - Ready Rig GS Stabilizer + ProArm Kit with Case
- DJI - Quick-Connect Adapter for Ronin 2 to Ready Rig (Pair)
Table of Contents
|
Upload User Manual
Have you got an user manual for the FREEFLY MōVI Pro Stabilizer Kit with Ready Rig GS and ProArm in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - FREEFLY MōVI Pro Handheld Bundle
| Cage | Dimensions: 7.7 x 7.8 x 6.5" / 19.6 x 20 x 16.5 cm
Maximum Payload: 15 lb / 6.8 kg | | Power | 1 x 12-14 VDC, 6 A D-Tap
1 x 12 VDC, 2 A D-Tap | | Radio Frequency | 2.4 GHz Frequency-Hopping Radio | | Weight | 5.8 lb / 2.7 kg | | | | Box Dimensions (LxWxH) | 26.75 x 26.3 x 16.7" | - Ready Rig Ready Rig GS Stabilizer + ProArm Kit with Case
| Load Range | 1-40 lb (0.45-18 kg) | | Telescoping Arm | 23-27" (58-69 cm) | | Accessory Mount Thread | 1/4"-20, 3/8"-16 | | Boom Range | 55" (140 cm) | | Belt Size | 28-44" (71-112 cm) | | Weight | 14 lb (6.4 kg) | | | | Box Dimensions (LxWxH) | 26.2 x 16.0 x 10.2" | - DJI Quick-Connect Adapter for Ronin 2 to Ready Rig (Pair)
| Compatibility | Ready Rig
Ronin 2 grip, or other device with 25/30 mm diameter tube | | Dimensions | 5.3 x 2.6 x 5.3" / 136 x 66 x 134 mm | | Weight | 1.7 lb / 0.76 kg, total (two adapters) | | | | Box Dimensions (LxWxH) | 5.25 x 5.25 x 2.65" |
Rating90% users recommend this product to others. And what about you?
This product has already been rated by 46 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Swan Bread maker SWBBA7...
Expert intel sixcore i5-8400 4GHZ turbo...
Color LaserJet Pro MFP M281fdw...
call of duty world war II...
Audio Technica AUDIO-AT8631
data sheet ...
|
| Discussion |
Latest contributions to the discussion:
Query
Name: Geoff Dibblee
Carson zOrb Digital USB Microscope
when useing the zorb it will not cover the whole of a stamp back or front as i am useing it for perfins stamps and whati have recived in the box just covers half a letter please can you help me to find away to enlarg the whole stamp
...
Blown transformer
Name: Dik Schouten
Demeter VTDB-2 Single Channel Tube Direct
Dear Sirs,where can i buy a new transformer for my VTDB 2b? If possible een 230 volt primary site...Y.S. Dik Schouten
...
Battery charger light does not turn yellow or green when charging LP-E17
Name: DAVE
Canon LC-E17 Charger for LP-E17 Battery
I have a new Canon battery charger for EOS R10 Camera. It has lights that turn yellow and green when charging the Canon battery that came with the camera. But when I put in the BM battery LP-E17 no lights come on. I can tell the battery is charged when I put it in the camera, b...
Stiff center dial wheel
Name: Reynolds, Jane
Tasco 10x50 Essentials Porro Binocular
It is very hard for me to turn the center wheel with the ridges on it.
Could you please email me the user manual for the Tasco 10 x 50 mm zip focus? Thank you...
Redfield 2-7x33
Name: Mike
Redfield 2-7x33 Revolution Riflescope
Can the elevation and windage knobs be reset to zero?
Thanks!...
|
|
