|
User Manual for Frezzi SunLight AC DC Travel Kit with Batteries Click to enlarge the picture
Contents of the user manual for the Frezzi SunLight AC DC Travel Kit
- Product category: LED Lights Frezzi
- Brand: Frezzi
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Frezzi LED Lights
|
User manual for the Frezzi SunLight AC DC Travel Kit contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Frezzi product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Frezzi user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Frezzi product will considerably shorten its lifespan!
|
Product description The SunLight AC/DC Travel Kit with Batteries from Frezzi is a comprehensive, carefully considered assortment of products designed to maximize the potential of the SunLight fixture. The kit includes 1 dimmable, daylight-balanced SunLight head with output that approximates that of a 575W HMI, along with 4-way barndoors, DC power cable, CTO and Diffusion Filter Pack, 7' light stand, and Stand Clamp Dual Brick adapter. This AC/DC kit also comes with 2 brick batteries, a dual charger, and a 30V Dual Brick Adapter. It all fits in a 10.5 x 17 x 22" wheeled, waterproof hard case. - SunLight LED Head The SunLight LED Light from Frezzi is an innovative light source that uses proprietary Directional Focusing Technology to access 100% of the generated light without lenses or filters that would sap the output. The SunLight produces the equivalent of 575W of HMI light with a color temperature of 5500K, while drawing only 220W and maintaining a high CRI of 93. The beam is adjustable from 20-degree spot to a wide flood that can be further controlled with optional 4-way barndoors. Light intensity is variable too, from 0 to 100% without color shift. The 8 x 10.5 x 13" fixture weighs just 6.5 lb, a fraction of the weight of many lights with comparable output. The SunLight LED Light is ready for worldwide use thanks to the inclusion of a 120 - 240 VAC adapter but it can also run on batteries when AC power is unavailable. For example, the SunLight gets 45 minutes of run time from two Frezzi HD-150 batteries. And don't worry about inclement weather - the SunLight is rated IP55 weather-resistant.
- Benefits
-
- 575W HMI-type output - almost 1000 fc at 10'
- Direct Focusing LED without the use of filters
- 45 Minute run time with two Frezzi HD-150 batteries
- Weatherproof and rugged all aluminum chassis
- Lightweight and compact - only 6.5-pound fixture
- Instant on and runs cool - fast setup and break-down
- Compact, optional, fully loaded AC/DC travel kit with HD stand available
- Travel friendly optional NiMH battery is safe for air transport
- No harmful UV radiation
- Saves money - no bulb replacements or ballast repairs
- Full 0 to 100% dimming without color shift
- Integrated LED voltmeter for battery/power supply status
- Photometrics
- Full Flood: 600 fc @ 10' (3.0 m)
Full Spot: 950 fc @ 10' (3.0 m) - 220W AC Power Supply for SunLight LED Head Keep your SunLight LED Head powered up during a long shoot with this 220W AC Power Supply from Frezzi. It works with a universal 120-240 VAC system, permitting it to be used worldwide. Also, it outputs about 24 VDC, an ideal setup for the SunLight fixture.
- Barndoor Set for SunLight LED Light Ideal for modifying the light output, the four-leaf Barndoor Set for SunLight LED Light from Frezzi controls spill light while it allows you to shape the fixture's light beam by swinging the leaves into it. A valuable asset for selective lighting, the barndoor set enables you to light the areas of a subject that you want to, while keeping light from areas that you don't want illuminated.
- CTO Gel and Diffusion Filter for SunLight The CTO Gel and Diffusion Filter for SunLight from Frezzi contains a Full CTO for converting the SunLight fixture's 5600K color temperature to 3200K. A diffusion filter is also included to soften the light's output.
- FHMS Heavy Duty Mini Light Stand for Dual Head AC/DC SkyLight Kit (7') The 7' FHMS Heavy Duty Mini Light Stand from Frezzolini is an accessory for the Dual Head AC/DC SkyLight Kit.
- Power Cable for SunLight The Power Cable for SunLight from Frezzi is a 12' long cable with a 2-prong plug that provides mains power to the SunLight LED fixture.
- Stand Clamp Dual Brick Battery Adapter Featured in Frezzi SunLight kits, the Stand Clamp Dual Brick Battery Adapter clamps to the light stand supporting the fixture and holds 2 brick-type batteries to power it. Used on the lower section of the stand, the batteries, which weigh approximately five pounds each, act as ballast to stabilize the light. The adapter can also be used to hold the AC power supply.
- Transport Case for SkyLight Dual Kit This Transport Case for SkyLight Dual Kit from Frezzolini is a rugged waterproof wheeled case with a pull handle and a padded divider set.
- HD-150EG 93306 Nickel Metal Hydride Brick Battery The Fezzolini HD-150EG 93306 is a 14.4 VDC 150 Wh NiMH (nickel metal hydride) battery with Energy Gauge. Video professionals around the world, recognize the alternative choice of the HD-150EG. The extremely high power output of the HD-150EG is highly recommended when powering a Mini-Fill on camera light MFIC and an HD camcorder simultaneously.
- Cell Chemistry
- The HD-15EG battery pack utilizes NiMH battery cells. NiMH cells do not experience voltage depression, eliminating any memory effect concerns.
- Premium Cells
- Unlike conventional cells that are stressed or damaged by fast charging, these cells are designed specifically for optimum life and performance.
- 14 Volt Design
- Professional camcorders operate on a 12-volt system. As per their design, a majority of camcorders will activate a low voltage warning or even cease to operate when they determine that the battery has fallen below 11-volts. Most equipment manufacturers suggest that a higher voltage battery should be used whenever possible.
- Protective Shell
- The HD-150EG is protected by an aluminum shell, high impact plastic case and rubberized coat protect the exterior from dents and dings; a thick shock absorbing internal padding protects the cells from impacts that would damage or destroy most conventional batteries.
- Anton Bauer Gold Mount
- The "Standard" solid metal "H" design mounting studs assure a smooth, precise mounting to whatever equipment it is attached to. The HD-150EG will charge on most manufacturers brick-style chargers.
- Energy Gage
- The built-in advanced Energy Gage offers the operator an accurate and reliable indication of the available battery capacity.
- FQC-2-A Quick Charger AB Type Bricks The Frezzolini FQC-2-A is a quick charger for brick batteries with an Anton Bauer type connector; it will charge NiCd and NiMH batteries one at a time. It offers 2 Bays, charge indicators and worldwide voltage acceptance.
- Status Indicator
- This small charger has an LED indicator for charge status.
- Universal Power
- The FQC-2-A will accept power from 110 to 220 VAC @ 50/60 Hz allowing worldwide operation.
- Dual Charging
- This charger accepts two batteries at a time.
- PA-30-B Dual Brick Adapter The Frezzi PA 30 B Dual Brick Adapter allows the user to utilize two brick batteries to power equipment. The dual configuration is hot swappable, allowing continuous equipment use. This device will work with 30VDC equipment offering a 2-pin Amphenol connection on the unit.
- 30 Volts
- 2-Pin
The 30 volt mode supplies a higher output for applications including, powering an HMI ballast. - Hot Swap
- Batteries can be exchanged while operating equipment; this allows for continuous operation.
In the Box Bundle Items SunLight LED Head trsuttwubr 220W AC Power Supply for SunLight LED Head Barndoor Set for SunLight LED Light CTO Gel and Diffusion Filter for SunLight FHMS Heavy Duty Mini Light Stand for Dual Head AC/DC SkyLight Kit (7') Power Cable for SunLight Stand Clamp Dual Brick Battery Adapter trsuttwubr Transport Case for SkyLight Dual Kit 2 x HD-150EG 93306 Nickel Metal Hydride Brick Battery FQC-2-A Quick Charger AB Type Bricks PA-30-B Dual Brick Adapter Table of Contents
|
Upload User Manual
Have you got an user manual for the Frezzi SunLight AC DC Travel Kit with Batteries in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - SunLight LED Head
Color Range | 5500K | Dimming | 0 - 100% Without color shift | LED Life Expectancy | 50,000 Hours | Beam Angle | 20° Spot-to-flood | Operating Voltage | Input Range: 24-36 VDC Battery: 2 x Frezzi HD-150s or 30 V pack AC Power Supply: 120 - 240 VAC, 50/60 Hz | Connector | Amphenol 30 V 2-pin (B+, A-) | Power Consumption | 220 W max. | Mount | 5/8" (16 mm) | Dimensions | 8.0 x 10.5 x 13" (20.3 x 27 x 33 cm) | Weight | 6.5 lb (3.0 kg) | - 220W AC Power Supply for SunLight LED Head
| AC Input Power | 120 to 240 VAC, 50 / 60 Hz | Output Voltage | 24 VDC | Power Draw | 220.00 W | - FHMS Heavy Duty Mini Light Stand for Dual Head AC/DC SkyLight Kit (7')
Mounting Options | 5/8" Stud | Maximum Working Height | 7' / 2.1 m | Air Cushioned | No | Detachable Base | No | Leveling Leg | No | Reverse Legs | Yes | Finish | Black | | Box Dimensions (LxWxH) | 23.0 x 3.0 x 3.0" | - Power Cable for SunLight
Dimensions | 9.0' (2.7 m) | Plug | 2-Prong US/No. American | - Transport Case for SkyLight Dual Kit
Carry/Transport Options | Top Handle, Telescoping Handle, Wheels | Interior Contents | Dividers/Organizers | Exterior Dimensions | 22.0 x 17.0 x 10.5" / 55.9 x 43.2 x 26.7 cm | Watertight | Yes | Weight | 19.0 lb / 8.6 kg | - HD-150EG 93306 Nickel Metal Hydride Brick Battery
Mount / Series Type | Gold Mount | Chemistry | Nickel-Metal Hydride | Capacity (Wh) | 150 Wh | Output Voltage | 14.4 VDC | Dimensions (W x H x D) | 5.5 x 4.2 x 3.0" / 139.0 x 108.0 x 76.0 mm | Weight | 5.4 lb / 2.4 kg | | Box Dimensions (LxWxH) | 7.0 x 5.5 x 4.5" | - FQC-2-A Quick Charger AB Type Bricks
Power Supply | No | Battery Bays | 2 | Type of Charging | Sumultaneous NiMH and NiCd 12-14.4 VDC | Diagnostics | LED Indicator | Connections/Interface | Anton Bauer Type (x 2) | Power Requirements | 120-240 Volts AC | Dimensions (WxHxD) | 2.75 x 5.6 x 1.5" 6.9 x 14.2 x 3.8cm | Weight | 0.5 lbs. 227 grams | | Box Dimensions (LxWxH) | 7.0 x 5.0 x 4.0" | - PA-30-B Dual Brick Adapter
Power Supply | Yes 30VDC Output | Battery Bays | Anton Bauer x2 | Type of Charging | None | Diagnostics | None | Connections/Interface | Gold Mount x2 2-Pin Amphenol Connector | Power Requirements | 14VDC 3-Stud Brick Batteries x2 | Dimensions (WxHxD) | Not Specified By Manufacturer | Weight | 1.4 lbs (0.6kg) | | Box Dimensions (LxWxH) | 8.0 x 7.1 x 4.0" | - Barndoor Set for SunLight LED Light
- CTO Gel and Diffusion Filter for SunLight
- Stand Clamp Dual Brick Battery Adapter
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 85 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
looking for a user manual for Quickbooks Premier Nonprofit 2020 for a Disabled American Veterans office.... Bower SFD9260.... 4-IN-1 WIRELESS CHARGER
... Brand :Gemini,model # XGA 4000,AND IT WAS PURCHASED NEW IN 2022,OR POSSIBLY EARLY 2023.WORKED perfect till one day I hit power switch and blew fuse x2... ZZSTAR binoculars...
|
Discussion |
Latest contributions to the discussion:
v18 Name: Craig Mcinturff Davis & Sanford Provista 7518B Tripod I am looking for a camera mounting plate for a v18 fluid head Davis & Sandford ... Impact SF-ABRL160 Flash stopped working Name: Sarah sananes Impact SF-ABRL160 Stand Mount Flash with Hello, our flash is connected to a canon camera and all of the sudden the flash is no longer working.
Does the flash have a certain battery life? ... REPEAT REQUEST AS YOU DID NOT ANSWER YOU JUST SENT ME MY MESSAGE BACK -PLEASE HELP Name: Tish Hopkins Benro TAD37C Series 3 Adventure Carbon Hi again-- all this did was send this email back to me with a link that brought me right back here... what is this?? also a link to search for manuals-- ive been there done that there is NO Manual to be found that answers my ? Please HELP thanks!!
Hi there is an extra small sc... Tripod heads DO NOT sit flush on the plate of the tripod Help Please Name: Tish Hopkins Benro TAD37C Series 3 Adventure Carbon Hi there is an extra small screw on the plate that the tripod head screws on that prevents my gimbal tripod head from sitting flush when it is screwed on. this is very annoying and does not allow my camera to stay steady when shooting. Please tell me how to resolve this issue. th... battery replacement Name: Danette L Boyd-Perez Doxie Go SE Portable Scanner Hello-- I have been working w/ support- it seems they sent incorrect battery replacement.
I confirmed DX-255 and was sent battery NP 120. There is no way that battery fits inside the panel of the DX-255. Please advise next steps thank you....
|
|