User manual
Garner HD-3WXL Degausser with IRONCLAD Verification,

User Manual for Garner HD-3WXL Degausser with IRONCLAD Verification, PD-5 & SSD-1 Destroyers & Case

• Product category: Degaussers & Erasers Garner
• Brand: Garner
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Garner Degaussers & Erasers

Product description

• HD-3WXL Degausser with IRONCLAD Erasure-Verification System This Garner kit combines the HD-3WXL Hard Drive and Tape Degausser with the IRONCLAD Erasure-Verification System. The HD-3WXL is a high-volume and high-speed degausser featuring a 0.93 Tesla (9300 gauss) field, and a nine-second complete erasure time. Suitable for hard drives up to 1.7" high and for multiple tape formats, the HD-3WXL erases up to 360 drives (3.5") or tapes per hour. After degaussing your media, use the IRONCLAD system to verify erasure, capture images of the erased drives, and to generate detailed, audit-compatible media destruction reports. Powered using a standard wall outlet, the HD-3WXL Degausser accommodates a wide variety of hard-drive and tape formats. The IRONCLAD system features a touchscreen interface, and includes erasure-report software, a barcode scanner, and labels for degaussed media.

  Features

  • • Compact form factor with exit slide
    • IRONCLAD erasure-verification system captures images of degaussed drives
    • IRONCLAD software generates audit-worthy reports tracking your media erasure
    • Touchscreen IRONCLAD interface; barcode scanner and media labels included
    • 9-second erasure time
    • Erases up to 360 drives (3.5") or tapes per hour
    • Accommodates hard drives up to 1.7" high and a wide variety of tape formats
    • Continuous-duty cycle
    • Internal verification, LCD display screen

  Certifications / Listings

  • CE
    ANSI
    FCC
• PD-5 High-Capacity Hard Drive Destroyer The Garner PD-5 Hard Drive Destroyer uses 15,500 pounds of crushing power to physically destroy hard drives containing your sensitive data. This powerful, high-speed, destroyer bends, breaks, and mangles hard drives, including data platters and other internal components, thwarting data recovery. The PD-5 is software-independent, destroying up to eight laptop-, two standard-, or one full-height hard drive per cycle. Drives are destroyed in 18 seconds or less, meeting NSA emergency-destruction guidelines. The Garner PD-5 Destroyer automatically senses the inserted media type, and can run continuously without cooling down between cycles. Its office-friendly design is quiet, free of hydraulic fluid, and offers push-button operation with an LCD display screen. The optional SSD-1 accessory destroyer expands the PD-5's range to include solid-state drives, including laptop SSDs, solid-state hybrid drives (SSHDs), flash, compact flash, thumb, and other USB drives (SSD-1 not included).

  Features

  • Powerful, high-speed destroyer crushes laptop, standard, or network hard drives up to 2.25" high
  • Uses 15,500 pounds of force and automatic torque control to crush drives in 18 seconds or less
  • Destroys up to eight laptop drives, two standard 1-inch hard drives, or one full-height hard drive per cycle
  • Quiet, software-independent, and office-friendly design contains no hydraulic fluid
  • Does not require cool-down between cycles
  • Can be used with the optional SSD-1 destroyer for obliterating a range of solid state drives

  Compliance Standards

  • • NSA/CSS Evaluated Products List (EPL) for Hard Drive Bending Devices
    • California Senate Bill 1386
    • DOD Emergency Destruction Guidelines
    • FCC
    • GLBA (Gramm-Leach-Bliley Act)
    • HIPAA (Health Information Portability and Accountability Act)
    • NIST (National Institute of Standards and Technology) Guidelines for Media
    • Sanitization
    • NIST SP 800-36
    • NIST SP 800-88r1
    • NSA/CSS SDDM 9-12
    • PCI DSS 3.2 (Payment Card Industry Data Security Standard)
    • PIPEDA (Personal Information Protection and Electronic Documents Act)
  • SSD-1 Solid-State Destroyer Accessory for PD-5 Destroyer The Garner SSD-1 Solid-State Destroyer adds an additional layer of media obliteration to your PD-5 Hard-Drive Destroyer. Use this NSA-listed accessory to demolish data contained in solid-state media, flash thumb drives, and SSHD (solid-state hybrid drive) controller boards. Place media up to 0.5" high in the SSD-1's destruction chamber, then let the 90 spikes go to work. The drive(s) are punctured and waffled, preventing recorded data from being accessed. When used with the PD-5 destroyer, this NSA/CSS EPL-listed device complies with a range of stringent standards for data destruction.

    Features

    • • Works in conjunction with the PD-5 Hard-Drive Destroyer
      • Destroys media on solid-state media, flash thumb drives, and SSHD (solid-state hybrid drive) controller boards
      • Features 90 spikes for puncturing and waffling media

    Compliance

    • • NSA/CSS Evaluated Products List (EPL) for hard-drive bending devices
      • California Senate Bill 1386
      • DOD Emergency Destruction Guidelines
      • FCC
      • HIPAA (Health Information Portability and Accountability Act)
      • NIST (National Institute of Standards and Technology) Guidelines for Media Sanitization
      • NIST SP 800-36
      • NIST SP 800-88r1
      • NSA/CSS SDDM 9-12
      • PCI DSS 3.2 (Payment Card Industry Data Security Standard)
      • PIPEDA (Personal Information Protection and Electronic Documents Act)
  • Rolling Case for HD-3WXL Degausser and PD-5 & SSD-1 Destroyers This Garner Transport Case for the HD-3WXL Degausser and PD-5 & SSD-1 Destroyers is designed to safely transfer its contents between locations. The interior of the case is custom-fit to hold an HD-3WXL degausser, PD-5 hard-drive destroyer, and SSD-1 media destroyer. The case may be used with or without its removable casters as a worktable to support the degausser and destroyers on site. Steel butterfly latches secure the case's top to its bottom base, and recessed handles are located on two of its sides. This Garner Transport Case's compact width enables it to fit through standard doorways and in most elevators.
    • Removable, full-swivel casters for smooth transportation
    • Robust, steel butterfly-latches are recessed into two sides of the case
    • Custom-fit for the HD-3WXL degausser, PD-5 hard-drive destroyer, and SSD-1 media destroyer
    • Compact width fits through standard doors and most elevators
  In the Box Bundle Items HD-3WXL Degausser with IRONCLAD Erasure-Verification System sdttudrcdwyvbdcqrrvabsuaydbu
  • Exit Slide
  • IRONCLAD Verification System for HD-3WXL Degausser
  • Laptop Hard Drive Caddy
  • 50 x "Degaussed" Media Labels
  • Stylus
  • Limited 1-Year Warranty
  PD-5 High-Capacity Hard Drive Destroyer
  • Limited 1-Year Warranty
  SSD-1 Solid-State Destroyer Accessory for PD-5 Destroyer
  • Limited 90-Day Warranty
  Rolling Case for HD-3WXL Degausser and PD-5 & SSD-1 Destroyers
  • Limited Lifetime Parts Warranty

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• HD-3WXL Degausser with IRONCLAD Erasure-Verification System

  Type	Capacitive discharge
  Supported Media Types	Hard Drives: up to 1.7" high, including full height, standard and laptop Tape Cartridges: All LTO, all DLT, 3490, 9940, 3592, AIT, and more
  Drawer Capacity (HxWxD)	1.7 x 4.5 x 5.9" (43 x 114 x 150 mm)
  Duty Cycle	Continuous
  Erasure Time	Maximum Hard Drives per Hour: 3600 x 1.8" (46 mm) 1440 x 2.5" (64 mm) 360 x 3.5" (89 mm)
  Magnetic Field Strength	0.93 Tesla (9300 gauss) nominal
  Operating Conditions	Temperature: 41 to 104°F (5 to 40°C) Humidity: 10 to 40% (non-condensing)
  Power Supply	100-240 VAC ±5%, 50/60 Hz Factory-configurable
  Power Consumption	Standby: 36 W Charging: 300 W (average) Erasing: 36 W
  Dimensions (HxWxD)	Without Slide: 18.9 x 13.3 x 13.0" (480 x 338 x 330 mm) With Slide: 18.9 x 22.8 x 13.0" (480 x 580 x 330 mm)
  Weight	66 lb (30 kg)

  Screen Size	7" (178 mm)
  Storage Capacity	16 GB
  Power Supply	15 W
  Control Head Dimensions	6.6 x 9.6 x 2.5" (168 x 244 x 64 mm)
  Weight	4 lb (1.8 kg)

• PD-5 High-Capacity Hard Drive Destroyer

  Type	Physical hard drive destroyer
  Compatible Media	Hard drives up to 2.25" (5.7 cm) high
  Power Supply	100-240 VAC ±5%, 50/60 Hz, factory-configurable
  Power Consumption	Standby: 90 W Crushing: 1200 W (maximum)
  Temperature	41 to 104°F (5 to 40°C)
  Humidity	10 to 40% (non-condensing)
  Destruction Chamber Capacity	2.3 x 4.9 x 6.8" (58 x 125 x 173 mm)
  Dimensions (HxWxD)	14.9 x 7.5 x 18.6" (38 x 19 x 47 cm)
  Weight	79 lbs (36 kg)

• SSD-1 Solid-State Destroyer Accessory for PD-5 Destroyer

  Capacity	Either/Or: 1 x SSD drive 1 x SSHD controller board Multiple flash drives Multiple thumb drives
  Destruction Chamber Dimensions	0.5 x 3 x 6" (13 x 74 x 152 mm)
  Dimensions (HxWxD)	2.8 x 4.8 x 6.8" (71 x 122 x 173 mm)
  Weight	8.3 lb (3.8 kg)

  Box Dimensions (LxWxH)	10.8 x 8.3 x 7.55"

• Rolling Case for HD-3WXL Degausser and PD-5 & SSD-1 Destroyers

  Dimensions

  Not specified by manufacturer

Rating

Discussion