User manual
Garner SW-2 Workstation with HD-2 Degausser,

User Manual for Garner SW-2 Workstation with HD-2 Degausser, IRONCLAD Verification, PD-5 & SSD-1 Destroyers

• Product category: Degaussers & Erasers Garner
• Brand: Garner
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Garner Degaussers & Erasers

Product description

• HD-2 Hard Drive & Tape Degausser 110-120 VAC (50/60 Hz) The Garner HD-2 Hard Drive & Tape Degausser erases hard drives (laptop, desktop, and network up to 1" high), and high coercivity tape media, including all formats of LTO (1,2,3,4), SuperDLT I & II, DLT, AIT, 8mm and more, all without any adapters. With a continuous duty rating (no cooling necessary), quiet operation, and a 60-second cycle time, the HD-2 can fit right on a desktop.The HD-2 is exceptionally user-friendly. Simply place your media into the drawer on the right side of the HD-2, and push the "Erase" button. Within 60 seconds your media is erased; open the drawer, and remove your erased media.The HD-2 has been independently tested, and certified to meet both ANSI, and CE standards. Built-in safeguards check the stored power before each erase cycle ensuring complete erasure every time. Audible tones, and lighted push buttons report the status of the HD-2 to the operator.The HD-2 produces an erasing field many times stronger than the erasing fields produced by the read/write heads in hard drives, and tape drives. The field strength, along with the encompassing magnetic field ensure the data is no longer recoverable by computer or laboratory attacks. Since the HD-2 does not rely on software, the HD-2 will also completely and permanently erase failed and damaged hard drives regardless of the operating system or interface.The HD-2 will assist you in meeting compliance standards for government mandates requiring complete elimination of sensitive information stored on magnetic media prior to re-use or disposal. Note: Hard Drives and some tapes are not reusable after having been erased with the HD-2
  • Erases high-coercivity hard drives & tapes
  • Easy to use drawer with one button operation
  • Continuous duty with a 60-second cycle time
  • Solid-state design that is micro-processor controlled
  Government Mandates:
  • The HD-2 will assist you in meeting compliance standards for government mandates requiring complete elimination of sensitive information stored on magnetic media prior to re-use or disposal
    • PCI DSS (Payment Card Industry) Data Security Standard
    • NIST (National Institute of Standards and Technology) Guidelines for Media Sanitization
    • NIST SP 800-36
    • NIST SP 800-88
    • HIPAA (Health Information Portability and Accountability Act)
    • PIPEDA (Personal Information Protection and Electronic Documents Act)
    • GLBA (Gramm-Leach-Bliley Act)
    • California Senate Bill 1386
• IRONCLAD Verification System for HD-2 Degausser Designed to work with the HD-2 Degausser, the Garner IRONCLAD Verification System provides visual and text documentation of your drives' erasure. This 16GB system consists of a touchscreen control head, a camera, erasure-report software, and a barcode scanner with stand. The IRONCLAD system is fully integrable with any 2015 or newer, USB-equipped HD-2 model degausser (available separately). Use the IRONCLAD system to scan each hard drive's serial number, capture an image of the degaussed drive, record the system operator's ID, and document the drive's erasure status. The included software generates erasure reports and images suitable for auditing purposes. A touchscreen stylus, and 50 "Degaussed" labels are included with the system components.

  Features

  • Automated erasure-verification system captures the hard drive's serial number, erasure status, and the operator's ID
  • Includes a 7" touchscreen interface with 16GB storage and stylus, a camera, and a barcode scanner with stand
  • IRONCLAD erasure-report software generates reports and images suitable for auditing purposes
• PD-5 High-Capacity Hard Drive Destroyer The Garner PD-5 Hard Drive Destroyer uses 15,500 pounds of crushing power to physically destroy hard drives containing your sensitive data. This powerful, high-speed, destroyer bends, breaks, and mangles hard drives, including data platters and other internal components, thwarting data recovery. The PD-5 is software-independent, destroying up to eight laptop-, two standard-, or one full-height hard drive per cycle. Drives are destroyed in 18 seconds or less, meeting NSA emergency-destruction guidelines. The Garner PD-5 Destroyer automatically senses the inserted media type, and can run continuously without cooling down between cycles. Its office-friendly design is quiet, free of hydraulic fluid, and offers push-button operation with an LCD display screen. The optional SSD-1 accessory destroyer expands the PD-5's range to include solid-state drives, including laptop SSDs, solid-state hybrid drives (SSHDs), flash, compact flash, thumb, and other USB drives (SSD-1 not included).

  Features

  • Powerful, high-speed destroyer crushes laptop, standard, or network hard drives up to 2.25" high
  • Uses 15,500 pounds of force and automatic torque control to crush drives in 18 seconds or less
  • Destroys up to eight laptop drives, two standard 1-inch hard drives, or one full-height hard drive per cycle
  • Quiet, software-independent, and office-friendly design contains no hydraulic fluid
  • Does not require cool-down between cycles
  • Can be used with the optional SSD-1 destroyer for obliterating a range of solid state drives

  Compliance Standards

  • • NSA/CSS Evaluated Products List (EPL) for Hard Drive Bending Devices
    • California Senate Bill 1386
    • DOD Emergency Destruction Guidelines
    • FCC
    • GLBA (Gramm-Leach-Bliley Act)
    • HIPAA (Health Information Portability and Accountability Act)
    • NIST (National Institute of Standards and Technology) Guidelines for Media
    • Sanitization
    • NIST SP 800-36
    • NIST SP 800-88r1
    • NSA/CSS SDDM 9-12
    • PCI DSS 3.2 (Payment Card Industry Data Security Standard)
    • PIPEDA (Personal Information Protection and Electronic Documents Act)
  • SSD-1 Solid-State Destroyer Accessory for PD-5 Destroyer The Garner SSD-1 Solid-State Destroyer adds an additional layer of media obliteration to your PD-5 Hard-Drive Destroyer. Use this NSA-listed accessory to demolish data contained in solid-state media, flash thumb drives, and SSHD (solid-state hybrid drive) controller boards. Place media up to 0.5" high in the SSD-1's destruction chamber, then let the 90 spikes go to work. The drive(s) are punctured and waffled, preventing recorded data from being accessed. When used with the PD-5 destroyer, this NSA/CSS EPL-listed device complies with a range of stringent standards for data destruction.

    Features

    • • Works in conjunction with the PD-5 Hard-Drive Destroyer
      • Destroys media on solid-state media, flash thumb drives, and SSHD (solid-state hybrid drive) controller boards
      • Features 90 spikes for puncturing and waffling media

    Compliance

    • • NSA/CSS Evaluated Products List (EPL) for hard-drive bending devices
      • California Senate Bill 1386
      • DOD Emergency Destruction Guidelines
      • FCC
      • HIPAA (Health Information Portability and Accountability Act)
      • NIST (National Institute of Standards and Technology) Guidelines for Media Sanitization
      • NIST SP 800-36
      • NIST SP 800-88r1
      • NSA/CSS SDDM 9-12
      • PCI DSS 3.2 (Payment Card Industry Data Security Standard)
      • PIPEDA (Personal Information Protection and Electronic Documents Act)
  • SW-2 Secure Workstation for Select Degaussers/HD Destroyers The Garner SW-2 Secure Workstation is designed to house select degaussers, hard drive destroyers, and accessories (components not included). Use this standing-height table to neatly contain and support your media destruction equipment. The solidly built SW-2 features a powder-coated aluminum and wood-laminate construction designed to prevent magnetic particles from attaching to the workstation. A locking compartment secures media drives awaiting erasure and/or destruction.

    Features

    • • Houses and supports select Garner degaussers, hard drive destroyers, and accessories (not included)
      • Powder-coated aluminum and wood-laminate construction prevents magnetic particles from attaching to the workstation
      • Locking compartment secures media drives awaiting erasure and/or destruction
      • Standing-desk height work surface
  • MB-1B Blue Recycle Container The MB-1B Blue Recycle Container from Garner is a half round recycling container with a capacity of 21 gallons. It's made from a durable rotationally molded polyethylene.Rotational molding is a 3-stage heating process that results in evenness all around the edges of the case. The polyethylene material is inserted into a mold, and then gradually rotated until the material sticks to the edges of the mold in an even pattern. Once cooled, this plastic material forms a strong bond that minimizes sagging and potential collapse.
    • Used for disposal of unwanted media
    • Durable polyethylene construction
  • Red "Media to be Degaussed" Bin for HD-3WXL With the Garner Red "Media to be Degaussed" Bin, you'll never again wonder whether or not your magnetic media, hard drive, or laptop has passed through your Garner HD-3WXL Degausser or other data eraser. Molded of durable, impact-resistant plastic, the bin's bright color and clear label answer the question of whether a tape or drive contains data.
  • Yellow "Degaussed Media" Bin for HD-3WXL With the Garner Yellow "Degaussed Media" Bin, you'll never again wonder whether or not your magnetic media, hard drive, or laptop has passed through your Garner HD-3WXL Degausser or other data eraser. Molded of durable, impact-resistant plastic, the bin's bright color and clear label answer the question of whether a tape or drive contains data.
  In the Box Bundle Items HD-2 Hard Drive & Tape Degausser 110-120 VAC (50/60 Hz) xcxvsuwdcqfuuaetfxvfrdteaxvxtxdbufu
  • Limited 1-Year Warranty
  IRONCLAD Verification System for HD-2 Degausser
  • Touchscreen Control Head
  • Camera
  • Barcode Scanner with Stand
  • IRONCLAD Erasure Report Software
  • 50 x "Degaussed" Labels
  • Stylus
  • 1-Year IRONCLAD Software Support
  • Limited 1-Year Warranty
  PD-5 High-Capacity Hard Drive Destroyer xcxvsuwdcqfuuaetfxvfrdteaxvxtxdbufu
  • Limited 1-Year Warranty
  SSD-1 Solid-State Destroyer Accessory for PD-5 Destroyer
  • Limited 90-Day Warranty
  SW-2 Secure Workstation for Select Degaussers/HD Destroyers
  • Limited 1-Year Warranty
  MB-1B Blue Recycle Container Red "Media to be Degaussed" Bin for HD-3WXL Yellow "Degaussed Media" Bin for HD-3WXL

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• HD-2 Hard Drive & Tape Degausser 110-120 VAC (50/60 Hz)

  Type	Hard drive & tape degausser
  Supported Formats	Hard drives up to 1.0" high including full height, standard and laptop drives, tape cartridges including DLT, LTO, and 8 mm
  Magnetic Field Strength	7300 Oe, 0.73 Tesla
  Duty Cycle	60 sec
  Power Requirements	110-120 VAC (50/60 Hz)
  Dimensions (WxHxD)	17.50 x 7.25 x 12.25 (444.50 x 184.15 x 311.15 mm)
  Weight	42 lbs (19.05 kg)

  Box Dimensions (LxWxH)	24.0 x 18.0 x 12.5"

• IRONCLAD Verification System for HD-2 Degausser

  Storage Capacity	16 GB
  Touchscreen	7" (178 mm)
  Interfaces	1 x Ethernet 4 x USB 1 x HDMI 1 x 3.5 mm camera port 1 x Power (standard wall outlet)
  Power Supply	90-240 VAC, 47-440 Hz
  Power Consumption	15 W
  Fuse	250 VAC, H3 .15 A
  Dimensions (WxHxD)	Control Head: 6.5 x 9.6 x 2.5" (165 x 244 x 64 mm) Camera Unit: 4.3 x 17.8 x 4.9" (109 x 451 x 125 mm)
  Weight	Control Head: 4 lb (1.8 kg) Camera Unit: 6 lb (2.7 kg)

• PD-5 High-Capacity Hard Drive Destroyer

  Type	Physical hard drive destroyer
  Compatible Media	Hard drives up to 2.25" (5.7 cm) high
  Power Supply	100-240 VAC ±5%, 50/60 Hz, factory-configurable
  Power Consumption	Standby: 90 W Crushing: 1200 W (maximum)
  Temperature	41 to 104°F (5 to 40°C)
  Humidity	10 to 40% (non-condensing)
  Destruction Chamber Capacity	2.3 x 4.9 x 6.8" (58 x 125 x 173 mm)
  Dimensions (HxWxD)	14.9 x 7.5 x 18.6" (38 x 19 x 47 cm)
  Weight	79 lbs (36 kg)

• SSD-1 Solid-State Destroyer Accessory for PD-5 Destroyer

  Capacity	Either/Or: 1 x SSD drive 1 x SSHD controller board Multiple flash drives Multiple thumb drives
  Destruction Chamber Dimensions	0.5 x 3 x 6" (13 x 74 x 152 mm)
  Dimensions (HxWxD)	2.8 x 4.8 x 6.8" (71 x 122 x 173 mm)
  Weight	8.3 lb (3.8 kg)

  Box Dimensions (LxWxH)	10.8 x 8.3 x 7.55"

• SW-2 Secure Workstation for Select Degaussers/HD Destroyers

  Dimensions (HxWxD)	47 x 50 x 32" (119 x 127 x 81 cm)
  Weight	190 lb (86 kg)

• MB-1B Blue Recycle Container

  Dimensions	11.0 x 28.0 x 21.0" (27.9 x 71.1 x 53.3 cm)
  Weight	1 lb (0.5 kg)

• Red "Media to be Degaussed" Bin for HD-3WXL

  Weight

  1.0 lb (0.5 kg)

• Yellow "Degaussed Media" Bin for HD-3WXL

  Weight

  1.0 lb (0.5 kg)

Rating

Discussion