User Manual for Garner TS-1 Degausser, IRONCLAD Verification, PD-4 Destroyer & Transport Case Kit Click to enlarge the picture
Contents of the user manual for the Garner TS-1 Degausser, IRONCLAD Verification, PD-4
- Product category: Degaussers & Erasers Garner
- Brand: Garner
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Garner Degaussers & Erasers
|
User manual for the Garner TS-1 Degausser, IRONCLAD Verification, PD-4 contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Garner product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Garner user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Garner product will considerably shorten its lifespan!
|
Product description This Garner kit combine the TS-1 Degausser, IRONCLAD Verification and PD-4 Hard-Drive Destroyer with a rolling transport case. The powerful, NSA-listed TS-1 degausser features a robust 20,000-gauss (2-tesla) magnetic field, and a 45-second complete erasure time. Track and document the erasure of your data using the included IRONCLAD Erasure Verification system, complete with touchscreen display, labels, barcode scanner, and report generator. The NSA-listed PD-4 Destroyer offers physical data destruction, using 10,500 pounds of force to crush hard drives up to 2.8" in height in 20 seconds. Safely transport the TS-1 Degausser and the PD-4 Destroyer in the DDM-14 case. Case features include ball-bearing wheels, inset handles, heavy-duty latches, and removable, locking casters. The slim DDM-14 case fits through standard doorways, and can be configured as a work-table. - TS-1 Hard Drive and Tape Degausser (NSA/CSS EPL-Listed) The TS-1 Hard Drive and Tape Degausser from Garner is an NSA-listed degausser featuring a robust 20,000-gauss (2-tesla) magnetic field, and a 45-second complete erasure time. Suitable for hard drives up to 1.3" high, and multiple tape formats, the TS-1 erases evenly, regardless of the media's orientation in the TS-1 drawer. This degausser erases both perpendicularly- and longitudinally-recorded drives up to 5000 Oe, and up to 3000-Oe magnetic tape media. The TS-1's built-in verification system confirms the strength of each erasure cycle in a bar graph format. Besides field strength, the TS-1 Degausser's LCD screen displays erasure status, a media count, and diagnostics. Compatible with standard office wall outlets, the TS-1 also features quiet operation, a table-top design, and four retractable handles for two-person lifting.
Features - Generates 20,000-gauss (2-tesla) magnetic field for hard drive, and tape cartridge erasure in 45 seconds
- Verification system with LCD display of field strength, media counter, and diagnostics
- Table-top design with pinch-free loading drawer
- Erases up to 5000-Oe perpendicular and longitudinal hard drives, and up to 3000-Oe magnetic tapes
Certifications / Listings - NSA/CSS - EPL-listed (Evaluated Products List)
CE
ANSI
FCC - IRONCLAD Verification System for TS-1 Degausser Designed to work with the TS-1 Degausser, the Garner IRONCLAD Verification System provides visual and text documentation of your drives' erasure. This 16GB system consists of a touchscreen control head, a camera, erasure-report software, and a barcode scanner with stand. The IRONCLAD system is fully integrable with any 2015 or newer, USB-equipped TS-1 model degausser (available separately). Use the IRONCLAD system to scan each hard drive's serial number, capture an image of the degaussed drive, record the system operator's ID, and document the drive's erasure status. The included software generates erasure reports and images suitable for auditing purposes. A touchscreen stylus, and 50 "Degaussed" labels are included with the system components.
Features - Automated erasure-verification system captures the hard drive's serial number, erasure status, and the operator's ID
- Includes a 7" touchscreen interface with 16GB storage and stylus, a camera, and a barcode scanner with stand
- IRONCLAD erasure-report software generates reports and images suitable for auditing purposes
- PD-4 Physical Hard Drive Destroyer Optimally used after degaussing, the Garner PD-4 Physical Hard Drive Destroyer provides quick, secure destruction of hard drives containing sensitive data. Just like a mini Death Star compactor, the PD-4 destroys by crushing, applying approximately 10,500 pounds of force to drives in its destruction chamber. The PD-4 is software-independent, destroying up to six laptop-, two standard-, or one full-height hard drive per cycle. The first drive is destroyed in 20 seconds or less, meeting NSA emergency-destruction guidelines. The Garner PD-4 Destroyer automatically adjusts its crushing power to the drive's height, and can run continuously without cooling down between cycles. Its office-friendly design is quiet, free of hydraulic fluid, and offers push-button operation.
Features - Destroys laptop, standard, or network hard drives
- Multiple drive destruction with first drive crushed in 20 seconds or less
- Durable stainless-steel crushing wedge with automatic height and crush control
- Quiet, office-friendly design with no hydraulic fluid
- For complete security, best used after drives have been degaussed
Compliance Standards -
- California Senate Bill 1386
- DOD Emergency Destruction Guidelines
- FCC
- GLBA (Gramm-Leach-Bliley Act)
- HIPAA (Health Information Portability and Accountability Act)
- NIST (National Institute of Standards and Technology) Guidelines for Media
- Sanitization
- NIST SP 800-36
- NIST SP 800-88r1
- NSA/CSS SDDM 9-12
- PCI DSS 3.2 (Payment Card Industry Data Security Standard)
- PIPEDA (Personal Information Protection and Electronic Documents Act)
In the Box Bundle Items TS-1 Hard Drive and Tape Degausser (NSA/CSS EPL-Listed) eubqbwurrzxfaacdwzbwyzbx IRONCLAD Verification System for TS-1 Degausser - Barcode Scanner with Stand
- IRONCLAD Erasure Report Software
- 1-Year IRONCLAD Software Support
PD-4 Physical Hard Drive Destroyer
Also Includes Table of Contents
|
Upload User Manual
Have you got an user manual for the Garner TS-1 Degausser, IRONCLAD Verification, PD-4 Destroyer & Transport Case Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - TS-1 Hard Drive and Tape Degausser (NSA/CSS EPL-Listed)
| Type | Capacitive discharge | | Supported Formats | Hard Drives: up to 1.3" high, including full height, standard & laptop
Tape Cartridges: LTO, all DLT, AIT, 2590 series, 8mm, etc. | | Magnetic Field Strength | 2 tesla (20,000 gauss) nominal | | Disk Coercivity in NSA EPL-D | 5000 Oe, longitudinal- and perpendicular-recorded | | Tape Coercivity in NSA EPL-D | 3000 Oe | | Duty Cycle | Continuous | | Erasure | Maximum Hard Drives per Hour:
720 x 1.8" (46 mm)
480 x 2.5" (64 mm)
80 x 3.5" (89 mm) | | Power Requirements | 100~240 VAC ±5%, 50/60 Hz Factory-configurable | | Power Consumption | Standby: 36 W
Charging: 420 W (average)
Erasing: 36 W | | Temperature / Humidity | Temperature: 41 to 104°F (5 to 4°C)
Humidity: 10 to 40% (non-condensing) | | Drawer Capacity (HxWxD) | 1.3 x 4.3 x 5.9" (31.8 x 108 x 148.6 mm) | | Dimensions (WxHxD) | 18.8 x 17.6 x 21.5" (476.3 x 447 x 546 mm) | | Weight | 144 lb (65.3 kg) | | | | Box Dimensions (LxWxH) | 33.5 x 27.5 x 26.0" | - IRONCLAD Verification System for TS-1 Degausser
| Storage Capacity | 16 GB | | Touchscreen | 7" (178 mm) | | Interfaces | 1 x Ethernet
4 x USB
1 x HDMI
1 x 3.5 mm camera port
1 x Power (standard wall outlet) | | Power Supply | 90-240 VAC, 47-440 Hz | | Power Consumption | 15 W | | Fuse | 250 VAC, H3 .15 A | | Dimensions (WxHxD) | Control Head: 6.5 x 9.6 x 2.5" (165 x 244 x 64 mm)
Camera Unit: 7.7 x 5.6 x 4.9" (196 x 143 x 125 mm) | | Weight | Control Head: 4 lb (1.8 kg)
Camera Unit: 1.2 lb (0.5 kg) | - PD-4 Physical Hard Drive Destroyer
| Type | Physical hard drive destroyer | | Hard Drive Maximum Height | 2.8 x 4.5 x 6.3" (71 x 114 x 160 mm) | | Chamber Capacity | Hard Drives:
1 x full height
2 x standard height
6 x laptop | | Power Supply | 100-130 VAC ±5%, 50/60 Hz, factory-configurable
200-240 VAC ±5%, 50/60 Hz, factory-configurable | | Power Consumption | During Standby: 24 W
During Crush: 1920 W (max) | | Temperature | 41 to 104°F (5 to 40°C) | | Humidity | 10 to 40% (non-condensing) | | Destruction Chamber Dimensions | 2.8 x 4.5 x 6.3" (71 x 114 x 160 mm) | | Dimensions (HxWxD) | 14.2 x 7.2 x 16.9" (361 x 183 x 429 mm) | | Weight | 73 lbs (33 kg) | | | | Box Dimensions (LxWxH) | 21.5 x 20.7 x 12.3" |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 51 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
