User Manual for Garner TS-1 Degausser Kit with PD-5 Destroyer, IRONCLAD Verification & Case Click to enlarge the picture
Contents of the user manual for the Garner TS-1 Degausser Kit with PD-5
- Product category: Degaussers & Erasers Garner
- Brand: Garner
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Garner Degaussers & Erasers
|
User manual for the Garner TS-1 Degausser Kit with PD-5 contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Garner product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Garner user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Garner product will considerably shorten its lifespan!
|
Product description This Garner kit packages the TS-1 Degausser, IRONCLAD Verification, and PD-5 Hard Drive Destroyer together with a rolling transport case. The NSA-listed TS-1 degausser features a robust 20,000-gauss (2-tesla) magnetic field, and a 45-second complete erasure time. Track and document the erasure of your data using the included IRONCLAD Erasure Verification system, complete with touchscreen display, labels, barcode scanner, and report generator. The NSA-listed PD-5 Destroyer offers another level of data destruction, crushing hard drives with 15,500 pounds of force. Safely transport the TS-1 and PD-5 components in the included rolling case featuring removable casters, custom-fit foam, and inset latches. - TS-1 Hard Drive and Tape Degausser (NSA/CSS EPL-Listed) The TS-1 Hard Drive and Tape Degausser from Garner is an NSA-listed degausser featuring a robust 20,000-gauss (2-tesla) magnetic field, and a 45-second complete erasure time. Suitable for hard drives up to 1.3" high, and multiple tape formats, the TS-1 erases evenly, regardless of the media's orientation in the TS-1 drawer. This degausser erases both perpendicularly- and longitudinally-recorded drives up to 5000 Oe, and up to 3000-Oe magnetic tape media. The TS-1's built-in verification system confirms the strength of each erasure cycle in a bar graph format. Besides field strength, the TS-1 Degausser's LCD screen displays erasure status, a media count, and diagnostics. Compatible with standard office wall outlets, the TS-1 also features quiet operation, a table-top design, and four retractable handles for two-person lifting.
Features - Generates 20,000-gauss (2-tesla) magnetic field for hard drive, and tape cartridge erasure in 45 seconds
- Verification system with LCD display of field strength, media counter, and diagnostics
- Table-top design with pinch-free loading drawer
- Erases up to 5000-Oe perpendicular and longitudinal hard drives, and up to 3000-Oe magnetic tapes
Certifications / Listings - NSA/CSS - EPL-listed (Evaluated Products List)
CE
ANSI
FCC - IRONCLAD Verification System for TS-1 Degausser Designed to work with the TS-1 Degausser, the Garner IRONCLAD Verification System provides visual and text documentation of your drives' erasure. This 16GB system consists of a touchscreen control head, a camera, erasure-report software, and a barcode scanner with stand. The IRONCLAD system is fully integrable with any 2015 or newer, USB-equipped TS-1 model degausser (available separately). Use the IRONCLAD system to scan each hard drive's serial number, capture an image of the degaussed drive, record the system operator's ID, and document the drive's erasure status. The included software generates erasure reports and images suitable for auditing purposes. A touchscreen stylus, and 50 "Degaussed" labels are included with the system components.
Features - Automated erasure-verification system captures the hard drive's serial number, erasure status, and the operator's ID
- Includes a 7" touchscreen interface with 16GB storage and stylus, a camera, and a barcode scanner with stand
- IRONCLAD erasure-report software generates reports and images suitable for auditing purposes
- PD-5 High-Capacity Hard Drive Destroyer The Garner PD-5 Hard Drive Destroyer uses 15,500 pounds of crushing power to physically destroy hard drives containing your sensitive data. This powerful, high-speed, destroyer bends, breaks, and mangles hard drives, including data platters and other internal components, thwarting data recovery. The PD-5 is software-independent, destroying up to eight laptop-, two standard-, or one full-height hard drive per cycle. Drives are destroyed in 18 seconds or less, meeting NSA emergency-destruction guidelines. The Garner PD-5 Destroyer automatically senses the inserted media type, and can run continuously without cooling down between cycles. Its office-friendly design is quiet, free of hydraulic fluid, and offers push-button operation with an LCD display screen. The optional SSD-1 accessory destroyer expands the PD-5's range to include solid-state drives, including laptop SSDs, solid-state hybrid drives (SSHDs), flash, compact flash, thumb, and other USB drives (SSD-1 not included).
Features - Powerful, high-speed destroyer crushes laptop, standard, or network hard drives up to 2.25" high
- Uses 15,500 pounds of force and automatic torque control to crush drives in 18 seconds or less
- Destroys up to eight laptop drives, two standard 1-inch hard drives, or one full-height hard drive per cycle
- Quiet, software-independent, and office-friendly design contains no hydraulic fluid
- Does not require cool-down between cycles
- Can be used with the optional SSD-1 destroyer for obliterating a range of solid state drives
Compliance Standards -
- NSA/CSS Evaluated Products List (EPL) for Hard Drive Bending Devices
- California Senate Bill 1386
- DOD Emergency Destruction Guidelines
- FCC
- GLBA (Gramm-Leach-Bliley Act)
- HIPAA (Health Information Portability and Accountability Act)
- NIST (National Institute of Standards and Technology) Guidelines for Media
- Sanitization
- NIST SP 800-36
- NIST SP 800-88r1
- NSA/CSS SDDM 9-12
- PCI DSS 3.2 (Payment Card Industry Data Security Standard)
- PIPEDA (Personal Information Protection and Electronic Documents Act)
- Rolling Case for TS-1 Degausser and PD-5 & SSD-1 Destroyers This Garner Transport Case for the TS-1 Degausser and PD-5 & SSD-1 Destroyers is designed to safely transfer its contents between locations. The interior of the case is custom-fit to hold a TS-1 degausser, PD-5 hard-drive destroyer, and SSD-1 media destroyer. The case may be used with or without its removable casters as a worktable to support the degausser and destroyers on site. Steel butterfly latches secure the case's top to its bottom base, and recessed handles are located on two of its sides. This Garner Transport Case's compact width enables it to fit through standard doorways and in most elevators.
- Removable, full-swivel casters for smooth transportation
- Robust, steel butterfly-latches are recessed into two sides of the case
- Custom-fit for the TS-1 degausser, PD-5 hard-drive destroyer, and SSD-1 media destroyer
- Compact width fits through standard doors and most elevators
In the Box Bundle Items TS-1 Hard Drive and Tape Degausser (NSA/CSS EPL-Listed) rscrzdctffreezcraazrecvstswsqe IRONCLAD Verification System for TS-1 Degausser - Barcode Scanner with Stand
- IRONCLAD Erasure Report Software
- 1-Year IRONCLAD Software Support
PD-5 High-Capacity Hard Drive Destroyer Rolling Case for TS-1 Degausser and PD-5 & SSD-1 Destroyers - Limited Lifetime Parts Warranty
Table of Contents
|
Upload User Manual
Have you got an user manual for the Garner TS-1 Degausser Kit with PD-5 Destroyer, IRONCLAD Verification & Case in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - TS-1 Hard Drive and Tape Degausser (NSA/CSS EPL-Listed)
| Type | Capacitive discharge | | Supported Formats | Hard Drives: up to 1.3" high, including full height, standard & laptop
Tape Cartridges: LTO, all DLT, AIT, 2590 series, 8mm, etc. | | Magnetic Field Strength | 2 tesla (20,000 gauss) nominal | | Disk Coercivity in NSA EPL-D | 5000 Oe, longitudinal- and perpendicular-recorded | | Tape Coercivity in NSA EPL-D | 3000 Oe | | Duty Cycle | Continuous | | Erasure | Maximum Hard Drives per Hour:
720 x 1.8" (46 mm)
480 x 2.5" (64 mm)
80 x 3.5" (89 mm) | | Power Requirements | 100~240 VAC ±5%, 50/60 Hz Factory-configurable | | Power Consumption | Standby: 36 W
Charging: 420 W (average)
Erasing: 36 W | | Temperature / Humidity | Temperature: 41 to 104°F (5 to 4°C)
Humidity: 10 to 40% (non-condensing) | | Drawer Capacity (HxWxD) | 1.3 x 4.3 x 5.9" (31.8 x 108 x 148.6 mm) | | Dimensions (WxHxD) | 18.8 x 17.6 x 21.5" (476.3 x 447 x 546 mm) | | Weight | 144 lb (65.3 kg) | | | | Box Dimensions (LxWxH) | 33.5 x 27.5 x 26.0" | - IRONCLAD Verification System for TS-1 Degausser
| Storage Capacity | 16 GB | | Touchscreen | 7" (178 mm) | | Interfaces | 1 x Ethernet
4 x USB
1 x HDMI
1 x 3.5 mm camera port
1 x Power (standard wall outlet) | | Power Supply | 90-240 VAC, 47-440 Hz | | Power Consumption | 15 W | | Fuse | 250 VAC, H3 .15 A | | Dimensions (WxHxD) | Control Head: 6.5 x 9.6 x 2.5" (165 x 244 x 64 mm)
Camera Unit: 7.7 x 5.6 x 4.9" (196 x 143 x 125 mm) | | Weight | Control Head: 4 lb (1.8 kg)
Camera Unit: 1.2 lb (0.5 kg) | - PD-5 High-Capacity Hard Drive Destroyer
| Type | Physical hard drive destroyer | | Compatible Media | Hard drives up to 2.25" (5.7 cm) high | | Power Supply | 100-240 VAC ±5%, 50/60 Hz, factory-configurable | | Power Consumption | Standby: 90 W
Crushing: 1200 W (maximum) | | Temperature | 41 to 104°F (5 to 40°C) | | Humidity | 10 to 40% (non-condensing) | | Destruction Chamber Capacity | 2.3 x 4.9 x 6.8" (58 x 125 x 173 mm) | | Dimensions (HxWxD) | 14.9 x 7.5 x 18.6" (38 x 19 x 47 cm) | | Weight | 79 lbs (36 kg) | - Rolling Case for TS-1 Degausser and PD-5 & SSD-1 Destroyers
| Dimensions | Not specified by manufacturer |
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 17 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
