User Manual for Gefen 4K Ultra HD 600 MHz 8x8 Matrix Router with HDR and Audio De-Embedder Click to enlarge the picture
Contents of the user manual for the Gefen 4K Ultra HD 600 MHz
- Product category: Routers & Switchers Gefen
- Brand: Gefen
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Gefen Routers & Switchers
 |
User manual for the Gefen 4K Ultra HD 600 MHz contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Gefen product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Gefen user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Gefen product will considerably shorten its lifespan!
|
Product description The Gefen 4K Ultra HD 600 MHz 8x8 Matrix Router routes eight 4K 60 Hz 4:4:4 sources to any combination of up to eight 4K 60 Hz 4:4:4 displays. It supports 18.2 Gbps of bandwidth and 600 MHz TMDS Clock frequency. Full bandwidth support allows the EXT-UHD600A-88 to accommodate resolutions up to 4K Cinema-DCI (4096 x 2160 up to 60 Hz 4:4:4), and 4K Ultra HD (3860 x 2160 up to 60 Hz, 4:4:4) along with HDR (High Dynamic Range). The router also supports HDCP 2.2 and the legacy HDCP 1.4 content protection algorithms.
The Gefen 8x8 Matrix also supports 1080p Full HD, 1920 x 1200 (WUXGA), 3DTV, and Deep Color (up to 1080p resolution). It features analog and digital audio outputs that break out the audio stream (2-channel analog, 2-channel PCM, and up to 5.1-channel bitstream) from each HDMI source, allowing the de-embedded audio content to be sent to external amplifiers and music distribution systems for added impact in bars, restaurants, clubs, venues, and corporate offices. In addition, multichannel digital audio including 7.1 channels of LPCM and HBR (High Bit Rate) digital audio formats such as Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio are passed through from the sources to the HDMI outputs. A comprehensive API facilitates enhanced functionality with third-party control systems, creating multitude of interface possibilities.
The matrix router is designed to work with the Gefen Syner-G software to simplify initial IP configuration and EDID Management. Each source can be routed to any or all displays, using the front-panel push buttons or the included handheld IR Remote Control. The matrix can also be controlled via RS-232, Telnet, UDP, and Gefen’s intuitive and easy-to-use web server interface. An easy-to-read, bright OLED front panel display indicates routing status and IP settings. The Gefen EXT-UHD600A-88 matrix features a 2 RU tall, rack-mountable enclosure that can also be placed on a shelf. It accommodates Gefen locking HDMI cables to ensure secure connections. - Routes eight 4K sources to eight 4K displays
- Supports resolutions up to 4K Cinema-DCI (4096 x 2160 up to 60 Hz, 4:4:4), 4K Ultra HD (3860 x 2160 up to 60 Hz, 4:4:4) with HDR, 1080p Full HD, and WUXGA (1920 x 1200)
- Supports HDCP 2.2 and 1.4
- Supports HDR (High Dynamic Range) 10-bit deep color at 4K 60 Hz 4:2:0 and 4K 24 Hz 4:4:4
- Supports 12-bit deep color at 1080p Full HD (60 Hz 4:4:4)
- EDID Management for integration of source and displays
- Supports uncompressed LPCM digital audio up to 7.1 channels
- Supports up to 7.1 channels of HBR (High Bit Rate) digital audio including Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio
- Supports the use of DVI sources and DVI displays up to 1080p Full HD and WUXGA (1920 x 1200) with Gefen CAB-DVI2-HDMI-LCK DVI-to-HDMI cables (not included)
- Built-in audio de-embedders break out 2-channel analog, 2-channel PCM, and up to 5.1 channels of Bitstream digital audio from each HDMI output, allowing the audio content to be sent to external amplifiers and music distribution systems for added impact
- Enhanced API facilitates added functionality with third-party control systems
- Easy-to-read, bright OLED front panel display indicates routing status and IP settings
- Push-button controls for Routing and Status
- RS-232 serial control interface for use with a third-party controller
- IP control via Telnet, UDP and the built-in web server interface
- Gefen Syner-G software simplifies initial IP configuration and EDID Management
- Field-upgradable firmware via web server interface
- Can be placed on a shelf or mounted in a standard 19" wide rack
UPC: 888814980752 In the Box Gefen 4K Ultra HD 600 MHz 8x8 Matrix Router with HDR and Audio De-Embedder 24 VDC Power Supply AC Power Cord Self-Adhesive Rubber Feet IR Extender Module xayyzqtrswsqszdeefxqbezxsw IR Remote (RMT-88A) Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Gefen 4K Ultra HD 600 MHz 8x8 Matrix Router with HDR and Audio De-Embedder in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersGefen EXT-UHD600A-88 Specs | TMDS | Maximum TMDS Clock: 600 MHz | | Data Rate | Total Signal Bandwidth/Data Rate: 18 Gbps | | HDMI Input Connectors | 8 x Type A 19-pin female, locking | | HDMI Output Connectors | 8 x Type A 19-pin female, locking | | Audio Output Connectors | Digital: 8 x TOSLINK optical
8 x RCA coaxial | | Analog Audio Output Connectors | Analog L/R Audio Output Connectors: 8 x 3.5 mm mini-stereo jack | | RS-232 Serial Port | 1 x DB-9, female | | Ethernet | IP Control Port: 1 x RJ45 | | Display | OLED, 2 rows, 20 characters per row | | Power Button | 1 x tact-type, bi-color blue/orange backlight | | Control Buttons | 9 x tact-type | | Reset Button | 1 x tact-type, recessed | | IR Sensor | 1, located on front panel | | IR Input / Output | 1 x 3.5 mm mini-stereo jack | | IR Extender | EXT-RMT-EXTIRN (not included) | | Power Connector | DC: 1 x 4-pin, locking | | Power Supply | 24 VDC | | Power Consumption | Not specified by the manufacturer | | Operating Temperature | 32 to 122°F (0 to 50°C) | | Operating Humidity | 5 to 90% RH, non-condensing | | Storage Temperature | -4 to 185°F (-20 to 85°C) | | Storage Humidity | 0 to 95% RH, non-condensing | | MTBF | Not specified by the manufacturer | | Rack Compatibility | Standard 19" (482.6 mm) rack, 2 RU high | | Dimensions (W × H × D) | 17.5 x 3.5 x 15.75" (440 x 89 x 400 mm) | | Weight | 21.6 lb (9.6 kg) | | | | Package Weight | 29.0 lb | | Box Dimensions (LxWxH) | 23.0 x 23.0 x 10.0" |
Rating60% users recommend this product to others. And what about you?
This product has already been rated by 89 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
