User Manual for Gefen VGA KVM over IP Transmitter & Receiver Kit Click to enlarge the picture
Contents of the user manual for the Gefen VGA KVM over IP Transmitter
- Product category: KVM Extenders Gefen
- Brand: Gefen
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Gefen KVM Extenders
|
User manual for the Gefen VGA KVM over IP Transmitter contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Gefen product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Gefen user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Gefen product will considerably shorten its lifespan!
|
Product description The Gefen VGA KVM over IP Transmitter & Receiver Kit allows you to extend a VGA signal, along with USB, RS-232, and two-way audio, up to 328 ft over a single Cat5e or better cable, in resolutions up to 1080p and 1920 x 1200 WUXGA. Two-way audio will allow you to send an audio signal to the receiver and mic signal back to the transmitter. Using an optional Gigabit switch, you can configure a multipoint matrix of up to 256 transmitters and 65,000 transmitter/receiver units in total. (The Gigabit switch must support 8K jumbo frame packets in order to support multipoint configurations.) - Gefen VGA KVM over IP Transmitter The Gefen VGA KVM over IP Transmitter transmits a VGA signal, along with USB, RS-232, and two-way audio, 328 ft over CAT5/6 to any Gefen KVM Receiver, sold separately. It supports input/output resolutions up to 1920 x 1200 WUXGA. Using an optional Gigabit switch, you can configure a multipoint matrix of up to 256 transmitters and 65,000 transmitter/receiver units in total. The Gigabit switch must support 8k jumbo frame packets in order to support multipoint mode. A free web server interface is available on the Gefen website for quick system set-ups and firmware upgrades.
Two-way audio consists of a 3.5mm line in and line out. The line out is for recording a mic input coming back from the receiving end. An IR port is available for optional IR control. 6 ft VGA, USB A to B, and DB-9 RS-232 cables, an L-shaped mounting bracket, and a locking power supply are included. - Key Features
-
- Transmits VGA, USB, RS-232, and two-way audio 328 ft over CAT5/6
- Supports resolutions up to 1920 x 1200
- Supports Gigabit switches for up to a 65,000 unit transmitter/receiver matrix
- 3.5mm audio line in for connecting independent audio
- 3.5mm audio line out for recording mic inputs
- RS-232 port for optional serial control
- IR port for optional IR control
- Tact-type Mode button for image sharpness and motion optimization
- Rotary-type ID Selector switch
- Includes VGA, USB, and DB-9 cables
- Includes L-shaped mounting bracket and locking power supply
- 1RU, half-rack wide, rack-mountable using an optional Gefen EXT-RACK-1U tray
UPC: 845344044965 Gefen VGA KVM over IP Receiver The Gefen VGA KVM over IP Receiver connects to any Gefen KVM Transmitter (sold separately) and extends a VGA signal, along with USB, RS-232, and two-way audio, 328 ft over CAT5/6, in resolutions up to 1920 x 1200 WUXGA. Using an optional Gigabit switch, you can configure a multipoint matrix of up to 65,000 transmitter/receiver units in total. The Gigabit switch must support 8k jumbo frame packets in order to support multipoint mode. A free web server interface is available on the Gefen website for quick system set-ups and firmware upgrades.
A total of three RJ-45 ports are available, one for the signals transmitted and two offering network connectivity. Two-way audio consists of a 3.5mm mic in and line out. The mic in sends a mic signal back to the transmitter for recording. Two USB 2.0 ports are located on the front panel for connecting a mouse and keyboard. An IR port is available for optional IR control. An L-shaped mounting bracket is included. - Key Features
-
- Supports VGA, USB, RS-232, and two-way audio from 328 ft over CAT5/6
- Supports input/output resolutions up to 1920 x 1200 WUXGA
- Supports Gigabit switches for 65,000 unit transmitter/receiver matrix
- Three RJ-45 ports, one for signals carried and two for network connectivity
- Two USB ports on the front panel for a keyboard and mouse
- 3.5mm mic in and line out ports
- IR port for optional IR control
- Tact-type Switch button
- Tact-type, recessed Reset button
- Includes L-shaped mounting bracket
- 1U, half-rack wide, rack-mountable using an optional Gefen rackmount tray (model EXT-RACK-1U)
UPC: 845344042060 In the Box - VGA KVM over IP Transmitter wqdcucsuxvdvtxbuxbbzbasdcsayvc
- 5V DC Locking Power Supply
- VGA Cable Male/Male (6 ft / 1.8 m)
- USB Cable Type A to B (6 ft / 1.8 m)
- DB-9 Cable (6 ft / 1.8 m)
- L-Shaped Mounting Bracket with Screws
- Quick-Start Guide
- 2-Year Limited Warranty
Table of Contents
|
Upload User Manual
Have you got an user manual for the Gefen VGA KVM over IP Transmitter & Receiver Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Gefen VGA KVM over IP Transmitter
| | | Ports | Transmitter:
1 x HD15 VGA Female (Input)
1 x 3.5 mm Audio (Input)
1 x DB9 RS232 Female (Input)
1 x USB Type-B USB 2.0 Female (Input)
1 x RJ45 Ethernet (Output)
1 x 3.5 mm Audio (Output)
1 x 3.5 mm IR (Output) | | Supported Resolutions | 1920 x 1200 | | Maximum Transmission Distance | 328' / 100 m | | | | DC Input Power | 5 VDC | | Power Consumption | 10 W | | | | Dimensions | 8.4 x 1.7 x 4.5" / 21.3 x 4.3 x 11.3 cm | | Weight | 2.0 lb / 0.9 kg | | | | Box Dimensions (LxWxH) | 14.3 x 11.8 x 3.8" | - Gefen VGA KVM over IP Receiver
| | | Ports | Receiver:
1 x HD15 VGA (Output)
1 x 3.5 mm Audio (Output)
1 x 3.5 mm IR (Output)
2 x USB Type-A USB 2.0 (Output)
3 x RJ45 (Input)
1 x 3.5 mm Audio (Input)
1 x DB9 RS232 Male (Input) | | Supported Resolutions | 1920 x 1200 | | Maximum Transmission Distance | 328' / 100 m | | | | DC Input Power | 5 VDC | | Power Consumption | 10 W | | | | Dimensions | 8.4 x 1.7 x 4.5" / 21.3 x 4.3 x 11.3 cm | | Weight | 2.0 lb / 0.9 kg | | | | Box Dimensions (LxWxH) | 13.1 x 8.1 x 3.6" |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 98 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
