|
User Manual for Genelec 8010 Studio Monitor Kit with 7040 Subwoofer and Stereo Volume Control Click to enlarge the picture
Contents of the user manual for the Genelec 8010 Studio Monitor Kit with
- Product category: Studio Monitors Genelec
- Brand: Genelec
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Genelec Studio Monitors
|
User manual for the Genelec 8010 Studio Monitor Kit with contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Genelec product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Genelec user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Genelec product will considerably shorten its lifespan!
|
Product description This B&H Kit combines a pair of Genelec 8010 Bi-Amplified Active Monitors with a Genelec 7040A Studio Subwoofer and a stereo volume controller to form the primary components of a professional studio monitoring system. The 8010's are designed for mixing and mastering in recording studios, broadcast facilities, and mobile work. The compact monitor utilizes independent 25 W class-D amplifiers to power a 3" woofer and a 3/4" metal dome tweeter housed in a die-cast aluminum enclosure. The monitor utilizes Genelec's Directivity Control Waveguide and Minimum Diffraction Enclosure designs to tame box reflections, flatten the frequency response from 74 to 20,000 Hz, and provide a maximum SPL of 96 dB.
The 7040A is an ultra-compact studio subwoofer designed to provide accurate low frequency reproduction in limited production spaces and is the ideal to complement Genelec 8010 monitors. It extends the low frequency response down to 30 Hz and uses Genelec's patented Laminar Spiral Enclosure (LSE) technology, which provides precise bass articulation and extended low frequency capacity. The stereo volume controller provides convenient volume control for all Genelec loudspeakers. The control has a Y-style cable that splits into standard 3.5mm male and female connectors for audio input and output, providing compatibility with a variety of computers, MP3 players, gaming devices, and more. - 2 x Genelec 8010 Bi-Amplified Active Monitor (Single, Producer Finish) Styled in what the manufacturer has dubbed "Producer Finish," the Genelec 8010 Bi-Amplified Active Monitor (Single) is designed for mixing and mastering in recording studios, broadcast facilities, and mobile work. The compact monitor utilizes independent 25W Class-D amplifiers to power a 3" woofer and a 3/4" metal dome tweeter housed in a die-cast aluminum enclosure.
The monitor utilizes Genelec's Directivity Control Waveguide and Minimum Diffraction Enclosure designs to tame box reflections, flatten the frequency response from 74 Hz to 20 kHz, and provide a maximum SPL of 96 dB.
The amplifiers utilize Genelec's Intelligent Signal Sensing circuitry to conserve electricity, utilizing less than 0.5W in standby mode, 5W when idle, and 30W peak per amplifier at full output. The amplifier automatically detects the presence of an input signal and adjusts the power consumption of the monitor accordingly.
A bass tilt control allows you to adjust the bass response to fit the acoustics of your listening environment. The included ISO stand helps reduce the transmission of structural vibrations into your work surface. - Genelec 7040A Studio Subwoofer The Genelec 7040A Studio Subwoofer is an ultra-compact studio subwoofer designed to provide accurate low frequency reproduction in limited production spaces. Offering a professional and reliable low frequency reproduction system in a transportable package, the Genelec 7040A is the ideal to complement Genelec 8010 and 8020 monitors. It extends the low frequency response down to 30 Hz and uses Genelec's patented Laminar Spiral Enclosure (LSE) technology, which provides precise bass articulation and extended low frequency capacity. This stereo subwoofer system can produce 100 dB of undistorted SPL using a 6.5" woofer, and a powerful Genelec-designed Class D amplifier. With its small footprint, the 7040A is a subwoofer solution for recording and composing/project studios, mobile vans and portable recording systems.
- Genelec 9000A Stereo Volume Control (Mystic Black) The 9000A Stereo Volume Control (Mystic Black) from Genelec is a compact stereo volume control unit that provides convenient volume control for all Genelec loudspeakers. The control has a Y-style cable that splits into standard 3.5mm male and female connectors for audio input and output, providing compatibility with a variety of computers, MP3 players, gaming devices, and more. Note: A converter cable (sold separately) may be needed for connecting to equipment that has RCA and/or XLR connectors.
- Compact design provides convenient volume control for all Genelec loudspeakers
- Standard 3.5mm I/O connectors provide wide compatibility with various audio devices
In the Box - 2 x 8010 Bi-Amplified Active Monitor (Single, Producer Finish) vzeysvqaduwwwrxfvzvdcvytxydbwxcbxc
- Power Cable
- Limited 2-Year Warranty
Includes Free - 9000A Stereo Volume Control (Mystic Black)
Table of Contents
|
Upload User Manual
Have you got an user manual for the Genelec 8010 Studio Monitor Kit with 7040 Subwoofer and Stereo Volume Control in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - 2 x Genelec 8010 Bi-Amplified Active Monitor (Single, Producer Finish)
| Type | Active | | Drivers | 1 x 0.8" / 1.9 cm Tweeter
1 x 3" / 7.6 cm Woofer | | Amplifier Output | Bass with 8-Ohm Load: 25 W
Treble with 8-Ohm Load: 25 W | | Maximum SPL | Short Term at 1 m: ≥96 dB
Short Term at 0.5 m: ≥102 dB
Long Term at 1 m: ≥91 dB
Peak at 1 m: ≥105 dB | | Filter | Lower Cut-Off Frequency, -3 dB: ≤73 Hz
Upper Cut-Off Frequency, -3 dB: ≥21 kHz | | Frequency Response | 74 Hz to 20 kHz (±2.5 dB)
67 Hz to 25 kHz (-6 dB) | | Harmonic Distortion | 70 to 400 Hz: <3% (80 dB SPL, 1 m, On Axis)
Above 400 Hz: <0.5% (80 dB SPL, 1 m, On Axis) | | Input | 1 x Balanced 3-Pin XLR Female | | Input Impedance | 10 kOhms | | Input Level | For 100 dB SPL Output at 1 m: -6 dBu (Sensitivity -10 dB Off)
Level Control Range Relative to Max Output: -10 dB (Sensitivity -10 dB On) | | Crossover Frequency | Bass/Treble: 3 kHz | | Tilt | Bass Control in -2 dB Steps: 0 to -6 dB at 100 Hz | | THD + N | ≤0.08% | | Voltage | 100 to 240 VAC | | Operating Range | Voltage: ± 10% | | Power Consumption | Standby: <0.5 W
Idle: 5 W
Full Output: 30 W | | Dimensions (H x W x D) | With ISO Stand: 7.7 x 4.8 x 4.5" / 19.5 x 12.1 x 11.5 cm
Without ISO Stand: 7.1 x 4.8 x 4.5" / 18.1 x 12.1 x 11.5 cm | | Weight | 3.3 lb / 1.5 kg | | | | Box Dimensions (LxWxH) | 12.3 x 6.6 x 6.0" | - Genelec 7040A Studio Subwoofer
| Maximum Sound Pressure Level (SPL) | 100 dB | | Frequency Response | 30 to 90 Hz (-6 dB) | | Input Level Adjustment | ± 3 dB (33 to 85 Hz) | | Driver Diameter | 6.5" / 16.5 cm | | Amplifier (Power) | 50 W | | Connectors | 2x XLR analog input
2x XLR analog output
| | Dimensions (HxWxD) | 16.1 x 13.8 x 8.1" (41 x 35 x 20.5 cm) | | Weight | 24.9 lb (11.3 kg) | | | | Box Dimensions (LxWxH) | 20.0 x 16.0 x 11.0" | - Genelec 9000A Stereo Volume Control (Mystic Black)
| Cable Length | 6.6' (2 m) (overall) | | Connectors | 1 x 3.5mm mini input
1 x 3.5mm mini output | | Dimensions (Diam. x H) | 2.1 x 1.6" (60 x 42 mm) | | Weight | 11.5 oz (325 g) | | | | Box Dimensions (LxWxH) | 4.55 x 4.4 x 1.85" |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 71 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
NEWER F100 CAMERA MONITOR...
PhotoStage progessional...
powerpint...
Night Detective Quest 5M 5x Night Vision Monocular ...
Ibanez AM93QM User Manual....
|
| Discussion |
Latest contributions to the discussion:
TR-P5TP pink robot dog
Name: Allyson
Top Race Race & Remote Control
Hello we are having issues with the remote to the robot dog it just flashes a red light will not sync to the robot dog what so ever the dog is charged and batteries have been changed out more the once, Can i get help trouble shooting the issue or if something needs to be sent bac...
Query
Name: Libba Guyton
Canon Pixma TS9520 Wireless All-In-One Printer
Support Code 1851
Multi purpose tray guide is open. Close the guide and press OK.
Done and the same message continue to appear....
Manual
Name: Grant
Konus KonuStart-700B 60mm f 11.6 Refractor
Please send user manual for Konustart-700B to above email address....
Fs3x manual
Name: Randy Reid
DigiTech FS3X Three-Function Foot Switch
I need manual
...
adding additional chime
Name: Stan Stansfield
OhmKat Video Doorbell Power Supply for
The additional chime does not work and is closure to the transmitter then the first one. I plugged in the additional chime and set the volume and chime. The original chime works when the additional chime is plugged in to new location. The original chime is located further away bu...
|
|
