|
User Manual for Genelec 8020.LSE Espresso - 5.1 Monitoring System for Pro Audio Applications Click to enlarge the picture
Contents of the user manual for the Genelec 8020.LSE Espresso - 5.1 Monitoring
- Product category: Studio Monitors Genelec
- Brand: Genelec
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Genelec Studio Monitors
|
User manual for the Genelec 8020.LSE Espresso - 5.1 Monitoring contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Genelec product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Genelec user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Genelec product will considerably shorten its lifespan!
|
Product description The Genelec 8020.LSE Espresso is a 5.1 surround sound monitoring system designed for mixing and critical listening. It can be used in post-production mixing, or to create 5.1 surround music mixes in pro audio contexts. Five 8020D studio monitors are included, which offer a 4" woofer, a 0.75" tweeter, a bi-amped, Class-D design, and wide on-/off-axis response. The 7050C subwoofer, on the other hand, offers an 8" woofer, a Class-D 130W amplifier, an integrated bass management system, and a frequency response extending down to 24 Hz. - 5 x Genelec 8020D Studio Monitor (Producer Finish) Styled in what the manufacturer has dubbed a "Producer Finish", and now utilizing Class-D amplification, the Genelec 8020D Active Two-Way 4" Studio Monitor provides an accurate reproduction of the source material in a compact form factor. Its die-cast aluminum enclosure features a rounded shape, which minimizes frequency and reflection distortions caused by edge diffraction. The metal dome tweeter is surrounded by Genelec's Directivity Controlled Waveguide, which helps to create an even response when listening both on and off axis.
The 8020D is built with Intelligent Signal Sensing (ISS) technology, which automatically activates the speaker when an audio signal is detected and puts it in standby mode when no signal is present, reducing its energy consumption to less than 0.5W. The 8020D features a 50W high-frequency amplifier for its ¾" tweeter, and a 50W low-frequency amplifier for its 4" woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec subwoofer can be used to monitor a wider array of frequencies. - Attached Iso-Pod table stand insulates the speaker from vibration and enables you to tilt its position upward or downward
- Well-suited for near-field studio monitoring, control rooms, editing suites, surround sound applications, and multimedia entertainment systems
- Rear-facing treble-tilt, bass roll-off, and desktop cut controls enable you to optimize the speaker to its environment
- Threaded holes for wall or ceiling brackets
- Driver unit protection circuitry
- Woofer and tweeter magnetically shielded
- Genelec 7050C - 130W 8" Active Studio Subwoofer Building upon the success of the 7050A and 7050B models, the Genelec 7050C Studio Subwoofer is an 8", 130W active subwoofer, well suited for discerning professionals in music, post, film, and broadcast. The 7050C boasts several improvements including a bypassable onboard bass management system, lower distortion, a universal mains voltage switched-mode power supply, and an increased maximum SPL of 103 dB.The subwoofer works in stereo or 5.1 channel configurations using analog XLR inputs and outputs. The integrated bass management section features five input and output channels with 85 Hz low-pass/high-pass filters, plus a discrete 120 Hz LFE signal input with selectable +10 dB boost.The 7050C utilizes a magnetically shielded low frequency driver, housed in a Genelec LSE spiral enclosure, which delivers an extended low-frequency response down to 24 Hz with low distortion. Rear panel DIP switches to allow the user to adjust subwoofer phase and low-frequency roll-off, engage the +10 dB LFE level, and activate and control the sensitivity of the Intelligent Signal Sensing (ISS) power-saving mode, which reduces the unit’s power consumption down to a mere 0.5 W in standby mode. The Genelec 7050C ships with a standard IEC power cord.
-
- Laminar Spiral Enclosure (LSE) technology
- Bass management system
- Optimized amplifiers
- Room response compensation
- Protection circuitry
- Active crossovers
In the Box - 5 x 8020D Studio Monitor (Producer Finish) sxuvqaewtudeyyuwyqrz
- Limited 2-Year Warranty (Extendable to 5-Years Total with Registration)
- 7050C - 130W 8" Active Studio Subwoofer
Table of Contents
|
Upload User Manual
Have you got an user manual for the Genelec 8020.LSE Espresso - 5.1 Monitoring System for Pro Audio Applications in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - 5 x Genelec 8020D Studio Monitor (Producer Finish)
Cut-Off Frequency | Lower: ≤ 56 Hz at -6 dB Upper: ≥ 25 kHz at -6 dB | Frequency Response | 62 Hz to 20 kHz (±2.5 dB) | SPL | ≥ 100 dB SPL maximum (short-term sine-wave acoustic output on axis in half-space, averaged from 100 Hz to 3 kHz at 3.3' / 1 m) 93 dB SPL maximum (long-term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver protection circuit) at 3.3' / 1 m) | Peak Output Capacity | ≥ 107 db maximum peak acoustic output (per pair in listening room with music material at 3.3' / 1 m) | Self-Generated Noise Level | ≤ 5 dB (in free field at 3.3' / 1 m on axis (A-weighted)) | Harmonic Distortion | < 3% (at 85 dB SPL at 3.3' / 1 m on axis, 50 to 200 Hz) < 0.5% (at 85 dB SPL at 3.3' / 1 m on axis, higher than 200 Hz) | Drivers | Bass: 4" / 105 mm cone Treble: ¾" / 19 mm metal dome Both drivers are magnetically shielded | Amplifier | Bass Amplifier Short-Term Output Power: 50 W Treble Amplifier Short-Term Output Power: 50 W Long-term output power is limited by driver protection circuitry | THD | ≤ 0.05% at nominal output | Crossover Frequency | Bass/Treble: 3 kHz | Digital Controls | GLM Software Frequency Response Adjustment Parametric Notch Filters: 16x Shelving Filters: 2 x LF and 2 x HF System Room Response Calibration: Genelec GLM AutoCal, GLM manual, standalone | Mains Voltage | 100 to 240 VAC 50/60 Hz | Power Consumption | Idle: 3 W Standby: < 0.5 W Full Output: 60 W | Analog Input | XLR female, balanced (pin 1 ground, pin 2 positive, pin 3 negative) | Input Level | -6 dBu at volume control max (for 100 dB SPL at 3.3' / 1 m) | Input Impedance | 10 kOhms | Sensitivity | -12 dB (constantly variable, control range relative to maximum output) | Controls | Treble Tilt Control (operating range): 0 to -2 dB at 15 kHz Desktop 200-Hz Control: -4 dB at 200 Hz Bass Roll-Off Control: 0 to -4 dB at 65 Hz | Analog Input | Maximum Analog Input Level: +24 dBu Analog Input Sensitivity: -6 dBu (100 dBSPL at 3.3' / 1 m) Analog Input Sensitivity Control: Adjustable from +36 to -6 dBu | Dimensions (H x W x D) | 9.5 x 6.0 x 5.6" / 242.0 x 151.0 x 142.0 mm, Iso-Pod stand included 9.1 x 6.0 x 5.6" / 230.0 x 151.0 x 142.0 mm, Iso-Pod stand excluded | Weight | 7.0 lb / 3.2 kg | | Box Dimensions (LxWxH) | 14.9 x 8.0 x 7.5" | - Genelec 7050C - 130W 8" Active Studio Subwoofer
| Frequency Response | Lower Cut-Off Frequency (-6 dB): 24 Hz Upper Cut-Off Frequency (-6 dB) Main Channels / LFE: 85 Hz / 120 Hz | Driver | 8.0" / 205 mm magnetically shielded | THD | Harmonic distortion at 90 dB SPL at 1 m on axis in half space (30 - 85 Hz) 2nd: ≤4% 3rd: ≤1% | SPL | Maximum Short Term Sine Wave SPL Output Averaged from 30 to 85 Hz, Measured in Half Space at 1 m: 103 dB | Noise | Self-Generated Noise Level in Half Space at 1 m / 3.3' on Axis (A-Weighted): ≤5 dB | | Power | Amplifier Short Term Output Power (Long Term Output Power is Limited by Driver Unit Protection Circuitry): 130 W | THD | Amplifier System THD at Nominal Output: ≤0.05 % | Power Supply | 100 to 240 VAC, 50/60 Hz universal | Power Consumption | Standby, ISS active: ≤0.5 W Idle: 11 W Full Output: 150 W | | Filter | Subsonic Filter (18 dB/Octave) Below: 24 Hz | Input Channels | 5 + LFE | Low Pass Filter | Low-Pass Frequency for Inputs 1-5: 85 Hz Low-Pass Frequency for LFE IN Input: 120 Hz | Connectors | Inputs: 6 x XLR (5 x inputs + LFE input) Output: 5 x XLR | Input Impedance | 10 kOhms balanced | Rejection | Mid-Band Rejection >400 Hz: ≥50 dB | High Pass Crossover | High-Pass Frequency for Outputs 1-5: 85 Hz | Output Gain | 0 dB | LF Roll Off | Bass Roll-Off Control in 4 dB Steps: 0 to -12 dB @ 26 Hz | Phase Control | Phase Matching Control in 90° Steps: 0 to -270° | Input Sensitivity | Input Sensitivity Control: +12 to -6 dB | Input Sensitivity (Selectable) | LFE Input Sensitivity Control: 0 or +10 dB selectable | Dimensions (H x W x D) | 16.1 x 13.8 x 12.6" / 410.0 x 350.0 x 319.0 mm | Weight | 38.1 lb / 17.3 kg | | Box Dimensions (LxWxH) | 19.5 x 17.0 x 16.0" |
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 52 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Go Pro FETCH Dog Harness ADOGM-001... Trijacon ACOG USMC scope... Pyle Pro BTA 62BT 6-Zone Stereo Receiver Bluetooth... LG Gram 17 Laptop... LG 300W 2.1 ch surround sound manual. It has the soundbar, subwoofer, wireless receiver for connected rear speakers and wireless controller. ...
|
Discussion |
Latest contributions to the discussion:
lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland
... lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland... Settings access and setup Name: Edwin Derks Nuance PaperPort 14 I had a problem with Paperport loading. Through the remote efforts of a Tech was able to get back online, however, "settings" are only listed 1 - 5 with no action listed as was 'visibly' available, (i.e. Scan both sides, Black and White, Color, etc.)
1. how to change, 2. wha... query Name: Vudayagiri Balasubramanyam Bose Wave SoundTouch Music System IV how to set up my bose radio with my remote working-class ... Hi. I didn’t even get a chance to try it once! :( plz help Name: Eric Tasakovic Keeley Dark Side Pedal I ordered a dark side pedal second hand online for 20 bucks cheaper than it would have been to buy it new….20 measly bucks. Anyway…it didn’t come with a power supply. I messed up and accidentally plugged in a 9v ac output power supply in, instead of the required 9v dc. I’...
|
|