User manual
Genelec 8020.LSE StereoPak - Two 8020DPMs

User Manual for Genelec 8020.LSE StereoPak - Two 8020DPMs and One 7040A Subwoofer

• Product category: Studio Monitors Genelec
• Brand: Genelec
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Genelec Studio Monitors

Product description

• 2 x Genelec 8020D Studio Monitor (Producer Finish) Styled in what the manufacturer has dubbed a "Producer Finish", and now utilizing Class-D amplification, the Genelec 8020D Active Two-Way 4" Studio Monitor provides an accurate reproduction of the source material in a compact form factor. Its die-cast aluminum enclosure features a rounded shape, which minimizes frequency and reflection distortions caused by edge diffraction. The metal dome tweeter is surrounded by Genelec's Directivity Controlled Waveguide, which helps to create an even response when listening both on and off axis.
  
  The 8020D is built with Intelligent Signal Sensing (ISS) technology, which automatically activates the speaker when an audio signal is detected and puts it in standby mode when no signal is present, reducing its energy consumption to less than 0.5W. The 8020D features a 50W high-frequency amplifier for its ¾" tweeter, and a 50W low-frequency amplifier for its 4" woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec subwoofer can be used to monitor a wider array of frequencies.
  • Attached Iso-Pod table stand insulates the speaker from vibration and enables you to tilt its position upward or downward
  • Well-suited for near-field studio monitoring, control rooms, editing suites, surround sound applications, and multimedia entertainment systems
  • Rear-facing treble-tilt, bass roll-off, and desktop cut controls enable you to optimize the speaker to its environment
  • Threaded holes for wall or ceiling brackets
  • Active crossover filter
  • Driver unit protection circuitry
  • Woofer and tweeter magnetically shielded
• Genelec 7040A Studio Subwoofer The Genelec 7040A Studio Subwoofer is an ultra-compact studio subwoofer designed to provide accurate low frequency reproduction in limited production spaces. Offering a professional and reliable low frequency reproduction system in a transportable package, the Genelec 7040A is the ideal to complement Genelec 8010 and 8020 monitors. It extends the low frequency response down to 30 Hz and uses Genelec's patented Laminar Spiral Enclosure (LSE) technology, which provides precise bass articulation and extended low frequency capacity. This stereo subwoofer system can produce 100 dB of undistorted SPL using a 6.5" woofer, and a powerful Genelec-designed Class D amplifier. With its small footprint, the 7040A is a subwoofer solution for recording and composing/project studios, mobile vans and portable recording systems.

• 2 x 8020D Studio Monitor (Producer Finish) zsuwabaw
• Limited 2-Year Warranty (Extendable to 5-Years Total with Registration)

• 7040A Studio Subwoofer

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• 2 x Genelec 8020D Studio Monitor (Producer Finish)

  Cut-Off Frequency	Lower: ≤ 56 Hz at -6 dB Upper: ≥ 25 kHz at -6 dB
  Frequency Response	62 Hz to 20 kHz (±2.5 dB)
  SPL	≥ 100 dB SPL maximum (short-term sine-wave acoustic output on axis in half-space, averaged from 100 Hz to 3 kHz at 3.3' / 1 m) 93 dB SPL maximum (long-term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver protection circuit) at 3.3' / 1 m)
  Peak Output Capacity	≥ 107 db maximum peak acoustic output (per pair in listening room with music material at 3.3' / 1 m)
  Self-Generated Noise Level	≤ 5 dB (in free field at 3.3' / 1 m on axis (A-weighted))
  Harmonic Distortion	< 3% (at 85 dB SPL at 3.3' / 1 m on axis, 50 to 200 Hz) < 0.5% (at 85 dB SPL at 3.3' / 1 m on axis, higher than 200 Hz)
  Drivers	Bass: 4" / 105 mm cone Treble: ¾" / 19 mm metal dome Both drivers are magnetically shielded
  Amplifier	Bass Amplifier Short-Term Output Power: 50 W Treble Amplifier Short-Term Output Power: 50 W Long-term output power is limited by driver protection circuitry
  THD	≤ 0.05% at nominal output
  Crossover Frequency	Bass/Treble: 3 kHz
  Digital Controls	GLM Software Frequency Response Adjustment Parametric Notch Filters: 16x Shelving Filters: 2 x LF and 2 x HF System Room Response Calibration: Genelec GLM AutoCal, GLM manual, standalone
  Mains Voltage	100 to 240 VAC 50/60 Hz
  Power Consumption	Idle: 3 W Standby: < 0.5 W Full Output: 60 W
  Analog Input	XLR female, balanced (pin 1 ground, pin 2 positive, pin 3 negative)
  Input Level	-6 dBu at volume control max (for 100 dB SPL at 3.3' / 1 m)
  Input Impedance	10 kOhms
  Sensitivity	-12 dB (constantly variable, control range relative to maximum output)
  Controls	Treble Tilt Control (operating range): 0 to -2 dB at 15 kHz Desktop 200-Hz Control: -4 dB at 200 Hz Bass Roll-Off Control: 0 to -4 dB at 65 Hz
  Analog Input	Maximum Analog Input Level: +24 dBu Analog Input Sensitivity: -6 dBu (100 dBSPL at 3.3' / 1 m) Analog Input Sensitivity Control: Adjustable from +36 to -6 dBu
  Dimensions (H x W x D)	9.5 x 6.0 x 5.6" / 242.0 x 151.0 x 142.0 mm, Iso-Pod stand included 9.1 x 6.0 x 5.6" / 230.0 x 151.0 x 142.0 mm, Iso-Pod stand excluded
  Weight	7.0 lb / 3.2 kg

  Box Dimensions (LxWxH)	14.9 x 8.0 x 7.5"

• Genelec 7040A Studio Subwoofer

  Maximum Sound Pressure Level (SPL)	100 dB
  Frequency Response	30 to 90 Hz (-6 dB)
  Input Level Adjustment	± 3 dB (33 to 85 Hz)
  Driver Diameter	6.5" / 16.5 cm
  Amplifier (Power)	50 W
  Connectors	2x XLR analog input 2x XLR analog output
  Dimensions (HxWxD)	16.1 x 13.8 x 8.1" (41 x 35 x 20.5 cm)
  Weight	24.9 lb (11.3 kg)

  Box Dimensions (LxWxH)	20.0 x 16.0 x 11.0"

Rating

Discussion