|
User Manual for Genelec 8320 Stereo SAM Kit - Two 8320APMs & GLM V2.0 User Kit with Volume Control Click to enlarge the picture
Contents of the user manual for the Genelec 8320 Stereo SAM Kit -
- Product category: Studio Monitors Genelec
- Brand: Genelec
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Genelec Studio Monitors
|
User manual for the Genelec 8320 Stereo SAM Kit - contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Genelec product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Genelec user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Genelec product will considerably shorten its lifespan!
|
Product description If you need two nearfield monitors for a small pro-audio mixing environment, consider the 8320 Stereo SAM Kit. This kit gives you two 4" 8320APM monitors that utilize Genelec's SAM DSP to help foster accuracy in suboptimal acoustic environments.
The monitors' drivers are connected to dedicated Class-D power amplifiers to ensure a clean, powerful performance. A Minimum Diffraction Enclosure coupled with a Directivity Control Waveguide help ensure a flat response across the frequency spectrum as well as precision stereo imaging.
The included GLM 2.0 Kit is a system designed to network the monitors together, measure the acoustic response of your room, and calibrate the speakers accordingly. A volume controller gives you control of the level. - 2 x Genelec 8320A Bi-Amplified Smart Active Monitor (Single) The single 8320A Bi-Amplified Smart Active Monitor from Genelec is a two-way monitor designed for professional applications. It features built-in Smart Active Monitor (SAM) digital signal processing (DSP), with the Genelec Loudspeaker Manager (GLM) software designed to provide accuracy and ease of use in difficult acoustic environments.
The high performance drivers are directly connected to dedicated D Class power amplifiers. System protection is implemented as a part of the SAM signal processing. The MDE (Minimum Diffraction Enclosure) enclosure is made of die-cast aluminum and shaped to reduce edge diffraction, and is combined with the Directivity Control Waveguide (DCW). - Genelec GLM 2.0 User Kit The GLM 2.0 User Kit from Genelec is an accessories kit designed for Genelec's GLM 2.0 networking system. It includes a GLM network adapter, a microphone with a holder, a USB cable, and a GLM network cable.
The GLM 2.0 Loudspeaker Manager Software is available for download with the purchase of a GLM 2.0 User Kit. GLM 2.0 is a monitor control networking system that manages connectivity with up to 30 SAM studio monitors and subwoofers. The GLM software is compatible with Windows and Mac and features level adjustment, distance delays, and flexible room response compensation equalization with the AutoCal automated calibration system. All parameters and settings are stored in system setup files or saved in each individual monitor or subwoofer if the GLM network needs to be disconnected. GLM 2.0 Loudspeaker Manager Software - Connectivity with up to 30 SAM monitors and subwoofers
- User interface designed for fast, easy setup
- Adapts SAM monitors to various environments
- Provides neutral sound reproduction via flat system frequency response for in-room calibration
- Automatic calibration of levels and distance-compensating delays for accurate and stable sound stage imaging
- Stores calibration settings for different listening positions and instantly recalls them during the production stage
- Symmetrical or individualized stereo pair equalization compensation
- Subwoofer crossover phase is set for all subwoofers on the network
- Each monitor group has its own AutoCal calibration file
- Groups contained in one GLM system setup file can use both analog and digital input
- Unlimited number of system setup files
- Volume control via external wired or wireless volume controller or GLM software master fader
- Real-time on-screen SPL reading of the active monitor group
GLM AutoCal Calibration Module - Provides an integrated process for complete automated measurement, analysis, and adjustment of every monitor on the GLM control network
- Aligns relative levels, compensates distance differences, and adjusts correct crossover phase for all subwoofers on the network
- Acoustic Response Editor provides graphical display of measured response, filter compensation, and system response for each monitor, with full manual control of acoustic settings
- SinglePoint and MultiPoint microphone positions provide measurements for one-, two-, or three-person mixing environments
- Uses a factory-calibrated Genelec 8300A acoustic measurement microphone (included)
- Genelec 9310A Volume Controller for GLM 2.0 The 9310A Volume Controller from Genelec provides wired volume control for all SAM studio monitors and subwoofers linked to the GLM 2.0 Network Adapter via the software volume fader. The controller connects to the GLM 2.0 interface using a built-in 3.5mm stereo male connector.
In the Box - 2 x 8320A Bi-Amplified Smart Active Monitor (Single) zsuwabaw
- Power Cord
- 16.4' RJ45 Cable
- Limited 2-Year Warranty
- 9310A Volume Controller for GLM 2.0 zsuwabaw
Table of Contents
|
Upload User Manual
Have you got an user manual for the Genelec 8320 Stereo SAM Kit - Two 8320APMs & GLM V2.0 User Kit with Volume Control in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - 2 x Genelec 8320A Bi-Amplified Smart Active Monitor (Single)
| | | Monitor Type | Active 2-Way | | Enclosure | Bass-Reflex, Shielded | | Drivers | HF Driver: 1 x 0.75" / 1.9 cm Tweeter
LF Driver: 1 x 4" / 10.2 cm Woofer | | Amplification | HF Amplifier: Rated at 50 W
LF Amplifier: Rated at 50 W | | | | Frequency Range | 55 Hz to 23 kHz (at -6 dB) | | Frequency Response | 66 Hz to 20 kHz ± 1.5 dB | | | | I/O | 1 x 3-Pin XLR Balanced Analog Input | | Computer Interface | 2 x RJ45 (Controller, Network) | | | | Dimensions (W x H x D) | 6.0 x 9.5 x 5.6" / 15.1 x 24.2 x 14.2 cm | | Weight | 7.0 lb / 3.2 kg | | | | Box Dimensions (LxWxH) | 14.8 x 8.1 x 7.5" | - Genelec GLM 2.0 User Kit
| | | Operating System | Windows 8 or 8.1 (32- or 64-bit), Windows 7 SP1 or newer (32- or 64-bit), Vista, XP | | Processor | Intel Pentium or compatible (1.6 GHz minimum) | | GPU | DirectX 11.0 class or better | | Minimum RAM | 2 GB | | Minimum Disk Capacity | 1 GB | | Display | 1024 x 768 or higher resolution | | Additional Requirements | Internet connection | | | | Operating System | OS X 10.10 Yosemite, OS X 10.9 Mavericks | | Processor | Any processor compatible with the above operating systems | | GPU | Any GPU compatible with the above operating systems | | Minimum RAM | 2 GB | | Minimum Disk Capacity | 1 GB | | Display | 1024 x 768 or higher resolution | | Additional Requirements | Internet connection | | | | Box Dimensions (LxWxH) | 9.9 x 4.8 x 2.3" | - Genelec 9310A Volume Controller for GLM 2.0
| | | Box Dimensions (LxWxH) | 4.4 x 4.4 x 2.0" |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 34 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Honeywell Home Doorbell 916.8 MHz Product Ref: 3231665-002 Rev B...
Go Pro FETCH Dog Harness ADOGM-001...
Trijacon ACOG USMC scope...
Pyle Pro BTA 62BT 6-Zone Stereo Receiver Bluetooth...
LG Gram 17 Laptop...
|
| Discussion |
Latest contributions to the discussion:
lithium ion battery pack EN-EL5 3.7 V 1100mAh
Name: Jane Holland
Nikon EN-EL5 Lithium-Ion Battery
HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland
...
lithium ion battery pack EN-EL5 3.7 V 1100mAh
Name: Jane Holland
Nikon EN-EL5 Lithium-Ion Battery
HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland...
Settings access and setup
Name: Edwin Derks
Nuance PaperPort 14
I had a problem with Paperport loading. Through the remote efforts of a Tech was able to get back online, however, "settings" are only listed 1 - 5 with no action listed as was 'visibly' available, (i.e. Scan both sides, Black and White, Color, etc.)
1. how to change, 2. wha...
query
Name: Vudayagiri Balasubramanyam
Bose Wave SoundTouch Music System IV
how to set up my bose radio with my remote working-class ...
Hi. I didn’t even get a chance to try it once! :( plz help
Name: Eric Tasakovic
Keeley Dark Side Pedal
I ordered a dark side pedal second hand online for 20 bucks cheaper than it would have been to buy it new….20 measly bucks. Anyway…it didn’t come with a power supply. I messed up and accidentally plugged in a 9v ac output power supply in, instead of the required 9v dc. I’...
|
|
