|
User Manual for Glidecam Devin Graham Signature Series Handheld Stabilizer and Soft Case Kit Click to enlarge the picture
Contents of the user manual for the Glidecam Devin Graham Signature Series Handheld
- Product category: Stabilizer Systems Glidecam
- Brand: Glidecam
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Glidecam Stabilizer Systems
|
User manual for the Glidecam Devin Graham Signature Series Handheld contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Glidecam product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Glidecam user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Glidecam product will considerably shorten its lifespan!
|
Product description Transform shaky handheld camera work into smooth, professional-looking footage with the Glidecam Devin Graham Signature Series Handheld Stabilizer and Soft Case Kit from B&H. The stabilizer supports loads between 2 and 12 lb and features a telescopic 1" center post, dynamic base platform that supports included counterweights, and a camera balance platform. The camera platform utilizes a quick release, sliding dovetail plate for quick camera attachment or removal and fine-tuning control knobs for precise balance adjustments. When its time to pack up, the stabilizer fits into the custom soft case, which features a large main compartment, an internal divider kit, and exterior pockets for accessory storage. - Glidecam Devin Graham Signature Series Handheld Stabilizer
- NAB 2015 | Devinsupertramp's Signature Glidecam
Supporting cameras between 2 and 12 pounds, the Devin Graham Signature Series Hand-Held Stabilizer from Glidecam combines features of their HD-Series stabilizers with many professional features from more elaborate body-mounted systems to transform your shaky handheld footage into smooth, graceful shots. Its precision camera balance platform incorporates a quick-release, sliding dovetail plate that lets you quickly attach or remove your camera, and features fine-tuning control knobs that enable precision front-to-back and side-to-side adjustments for horizontal balancing. Further aiding balancing is a 1" diameter telescopic center post with laser engraved guide markings and a position-adjustable gimbal for quick vertical balancing. Rounding out the system is the dynamic base platform that supports the included counterweights and can manually expand or contract, allowing you to adjust the system dynamic balance and rotational pan inertia of the system. - Key Features
-
- Supports cameras weighing from 2 to 12 pounds
- Quick-release sliding camera plate with brass alignment pin
- Fine-tuning knobs on camera platform for front-to-back and side-to-side camera adjustments
- Telescopic center post with laser engraved guide scale markings
- Position-adjustable knurled 3-axis gimbal (positive twist lock)
- Adjustable dynamic balance and inertial-control base platform
- 12 counterweight plates includes
- Foam-padded handle grip
- Precision bearings
- Rubber feet under base platform
- 1/4"-20 mounting hole on base platform for attached an optional monitor
- Black anodized aluminum
- Carry bag
- Video tutorial included that provides answers to frequently asked questions
UPC: 674330041158 - Porta Brace Carrying Case for Camera and Glidecam HD2000
- NAB 2015 | Devinsupertramp's Signature Glidecam
The Porta Brace Carrying Case for Camera and Glidecam HD2000 is a 1000-denier Cordura case crafted to house a camera and Glidecam stabilization unit, along with counterweights. It comes with foam stabilizer blocks and a padded interior divider kit.
With a Camera Cradle, the carrying case protects your camera during transport. Additionally, the case is equipped with 2 large exterior pockets to hold accessories, a heavy-duty suede shoulder strap, and a protective zipper facing that keeps the compartment clean and dry. Note: Does not fit a support arm/vest system. - Made from abrasion-resistant 1000-deiner Cordura
- Has room for a camera, Glidecam HD2000, and counterweights
- Padded interior divider kit
- Camera Cradle - protects your camera during transport
- 2 large exterior pockets - for holding accessories
- Heavy-duty suede shoulder strap
- Protective zipper facing - keeps the compartment clean and dry
UPC: 877547017668 In the Box - Devin Graham Signature Series Handheld Stabilizer zvrwcuzxcbbzbxdwsbedfvsf
- 12 x Counterweight Plates
- Carrying Bag
- USB Thumb Drive with Video Tutorial
- Limited 1-Year Warranty
- Porta Brace - Carrying Case for Camera and Glidecam HD2000 zvrwcuzxcbbzbxdwsbedfvsf
Table of Contents
|
Upload User Manual
Have you got an user manual for the Glidecam Devin Graham Signature Series Handheld Stabilizer and Soft Case Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Glidecam Devin Graham Signature Series Handheld Stabilizer
| Stabilizer Type | Single-Grip Handheld | | Load Capacity | 2 to 12 lb / 0.9 to 5.4 kg | | Camera Mount | 1/4"-20 Screw | | Additional Mount | 1/4"-20 Thread | | Height | 20 to 28" / 50.8 to 71.1 cm | | Weight | 2.1 lb / 1.0 kg | | Counterweights | 12 x 4.35 oz / 128.38 g | | Material of Construction | Aluminum | | Camera Platform Dimensions | 4.2 x 3.2 x 1.5" / 10.8 x 8.3 x 3.8 cm
5.5 x 5.0 x 1.5" / 14.0 x 12.7 x 3.8 cm, Including Knobs | | Base Platform Dimensions | 11.5 to 15.0 x 4.0" / 29.2 to 38.1 x 10.2 cm | | | | Box Dimensions (LxWxH) | 23.8 x 11.9 x 4.9" | - Porta Brace Carrying Case for Camera and Glidecam HD2000
| Dimensions | Interior: 29.5 x 13 x 11.5" (75 x 33 x 29 cm)
Exterior: 31 x 17 x 12" (79 x 43 x 30.5 cm) | | Weight | 7 lbs (3.17 kg) | | | | Box Dimensions (LxWxH) | 28.1 x 11.9 x 8.2" |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 51 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
pocket quadcopter RIV-YT320...
CYBERPOWERPC GMA6200BSTV2...
FUJINON ERD-30A-D01A ZOOM DEMAND CONTROLLER
...
Just bought from Bestbuy Cyberpower,GMA5600BSTV4,model C series
another number on the label ET8252-10294
CECModel:CS450217MB492126 mfg date 043025
...
Vortex crossfire ii 6-24x50
I essentially want to return my scope to mechanical zero. This has been on a couple rifles and I would like to set f...
|
|
