|
User Manual for Glidecam X-10 Stabilizer Vest with Devin Graham Handheld Stabilizer Kit Click to enlarge the picture
Contents of the user manual for the Glidecam X-10 Stabilizer Vest with Devin
- Product category: Stabilizer Systems Glidecam
- Brand: Glidecam
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Glidecam Stabilizer Systems
|
User manual for the Glidecam X-10 Stabilizer Vest with Devin contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Glidecam product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Glidecam user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Glidecam product will considerably shorten its lifespan!
|
Product description The Glidecam X-10 Stabilizer Vest with Devin Graham Handheld Stabilizer Kit from provides multi-axis stabilization for camera loads up to 12 lb. Both sections of the X-10 support arm can be moved up and down, adding an additional level of smooth movement. The padded vest, the support arm, and the Devin Graham stabilizer with its 12 counterweight plates allow you to capture ultra-stable shots whether you, the subject, or both of you are in motion. - Glidecam X-10 Dual Support Arm Stabilizer Vest System The GLIDECAM X-10 is a professional camera stabilization system designed for use with the Glidecam 2000 Pro, 4000 Pro, HD-2000, HD-4000, XR-2000 and XR-4000. The GLIDECAM X-10 system will allow you to walk, run, go up and down stairs, shoot from moving vehicles and travel over uneven terrain without any camera instability or shake.
- Upgrades from Smooth Shooter
- The X-10 comes with both sections of its support arm being able to move vertically, whereas the Smooth Shooter comes with only the front section of its support arm being able to move vertically. Also, the X-10 comes with a trimmable arm-to-vest connector, whereas the Smooth Shooter's arm-to-vest connector is not trimmable.
- Support Arm Movement
- The GLIDECAM X-10'S support arm can be boomed up and down, as well as pivoted in and out, and side-to-side. It is the combined booming and pivoting action of the support arm that isolates your motions from the camera in a way that creates smooth camera footage.
- Support Vest
- The Glidecam X-10 support vest is lightweight, comfortable and can be adjusted to fit a wide range of operators. High endurance, dual density, EVA foam padding and integral T6 aluminum alloy create a vest which can hold and evenly distribute the weight of the system across the operator's shoulders, back, and hips. For safety, quick release, high impact buckles allow the vest to be removed quickly.
UPC: 674330754560 - Glidecam Devin Graham Signature Series Handheld Stabilizer Supporting cameras between 2 and 12 pounds, the Devin Graham Signature Series Hand-Held Stabilizer from Glidecam combines features of their HD-Series stabilizers with many professional features from more elaborate body-mounted systems to transform your shaky handheld footage into smooth, graceful shots. Its precision camera balance platform incorporates a quick-release, sliding dovetail plate that lets you quickly attach or remove your camera, and features fine-tuning control knobs that enable precision front-to-back and side-to-side adjustments for horizontal balancing. Further aiding balancing is a 1" diameter telescopic center post with laser engraved guide markings and a position-adjustable gimbal for quick vertical balancing. Rounding out the system is the dynamic base platform that supports the included counterweights and can manually expand or contract, allowing you to adjust the system dynamic balance and rotational pan inertia of the system.
- Key Features
-
- Supports cameras weighing from 2 to 12 pounds
- Quick-release sliding camera plate with brass alignment pin
- Fine-tuning knobs on camera platform for front-to-back and side-to-side camera adjustments
- Telescopic center post with laser engraved guide scale markings
- Position-adjustable knurled 3-axis gimbal (positive twist lock)
- Adjustable dynamic balance and inertial-control base platform
- 12 counterweight plates includes
- Foam-padded handle grip
- Precision bearings
- Rubber feet under base platform
- 1/4"-20 mounting hole on base platform for attached an optional monitor
- Black anodized aluminum
- Carry bag
- Video tutorial included that provides answers to frequently asked questions
UPC: 674330041158 In the Box - X-10 Dual Support Arm Stabilizer Vest System zvzeceefybsw
- X-10 Support Arm
- Glidecam Support Vest
- Stainless Steel Arm Post
- Aluminum Arm Post
- 6 x Steel Weights
- Miscellaneous Hardware
- Manual
- 90 Day Warranty
- Devin Graham Signature Series Handheld Stabilizer
Table of Contents
|
Upload User Manual
Have you got an user manual for the Glidecam X-10 Stabilizer Vest with Devin Graham Handheld Stabilizer Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Glidecam X-10 Dual Support Arm Stabilizer Vest System
| Weight | Dual Support Arm
5.75 lbs
2.6 kgIndividual Weight Plates
12.9 oz
366 g | | Range | Boom Range 30" | | | | Box Dimensions (LxWxH) | 26.5 x 18.5 x 14.3" | - Glidecam Devin Graham Signature Series Handheld Stabilizer
| Stabilizer Type | Single-Grip Handheld | | Load Capacity | 2 to 12 lb / 0.9 to 5.4 kg | | Camera Mount | 1/4"-20 Screw | | Additional Mount | 1/4"-20 Thread | | Height | 20 to 28" / 50.8 to 71.1 cm | | Weight | 2.1 lb / 1.0 kg | | Counterweights | 12 x 4.35 oz / 128.38 g | | Material of Construction | Aluminum | | Camera Platform Dimensions | 4.2 x 3.2 x 1.5" / 10.8 x 8.3 x 3.8 cm
5.5 x 5.0 x 1.5" / 14.0 x 12.7 x 3.8 cm, Including Knobs | | Base Platform Dimensions | 11.5 to 15.0 x 4.0" / 29.2 to 38.1 x 10.2 cm | | | | Box Dimensions (LxWxH) | 23.8 x 11.9 x 4.9" |
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 77 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
NCH SoftwarePhotoStageSlideshow producer...
maisa ec12/b
manual...
Samsung tv - 75Q7DA 4k UHD Dual LED quantum HDR...
CyberPowerPC GMA6200BSTV2 Model CS450217MB492675 MFG Date 05/2025...
Leatherman mut...
|
|
