|
User Manual for Golden Age Project PREQ-73 PREMIER Single-Channel Microphone Preamplifier and Equalizer Click to enlarge the picture
Contents of the user manual for the Golden Age Project PREQ-73 PREMIER Single-Channel
- Product category: Microphone Preamps Golden Age Project
- Brand: Golden Age Project
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Golden Age Project Microphone Preamps
|
User manual for the Golden Age Project PREQ-73 PREMIER Single-Channel contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Golden Age Project product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Golden Age Project user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Golden Age Project product will considerably shorten its lifespan!
|
Product description The Golden Age Project PREQ-73 PREMIER is a single-channel microphone preamplifier and equalizer designed to deliver the character of a vintage 1073-style preamp/EQ, for vocalists, musicians, and recording engineers in home, project, and commercial studios. Loaded with Carnhill transformers, polystyrene and tantalum capacitors, and soldered connections, it offers musical tone and up to 80 dB of gain. Tonal customization is easy thanks to an array of front-panel controls.Route a mic-, line-, or instrument-level signal via the XLR-1/4" TRS combo jack or 1/4" TS Hi-Z input. Tailor the sonic traits to your preference using the inductor-based midrange EQ, high- and low-frequency shelving bands, and switchable input impedance. You can achieve saturation by lowering the output level control while increasing the input gain and checking the 4-segment LED output level meter, which indicates levels at -10 dBu, +4 dBu, +14 dBu, and clipping. Balanced XLR and 1/4" TRS output jacks are available on the rear panel.Phantom power and polarity are switchable via dedicated controls. The PREQ-73 PREMIER is powered by the included 24V power adapter. - Vintage 1073-style electronics with no integrated circuits in the signal path
- Maximum gain in mic mode is 80 dB, enough to handle passive ribbon mics with quiet sound sources
- Stepped input gain switch allows 20 to 80 dB of gain in mic mode or -10 to +20 dB in line mode
- Dedicated switch for engaging/disengaging the 3-band EQ section
- Low-frequency shelving EQ with
|
Upload User Manual
Have you got an user manual for the Golden Age Project PREQ-73 PREMIER Single-Channel Microphone Preamplifier and Equalizer in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersGolden Age Project PREQ73 Specs | Number of Channels | 1 | | Inputs | 1 x XLR-1/4" TRS Combo Jack
1 x 1/4" TS Hi-Z | | Output | 1 x 3-Pin XLR
1 x 1/4" TRS | | Phantom Power | +48 VDC | | Multi Function | Preamplifier and Equalizer | | Gain Range | Mic Input: 20 to 80 dB
Line Input: -10 to +20 dB | | Equalizer | LF: ±15 dB Shelving Band at 55 Hz or 220 Hz
MF: ±15 dB Peaking Band at 350/700 Hz, 1.6 kHz, or 3.2 kHz
HF: ±20 dB Shelving Band at 10 kHz or 16 kHz | | Input Impedance | Mic: 300 Ohms or 1200 Ohms (Selectable)
Line: 10 kOhms
Instrument: 100 kOhms | | Maximum Output Level | Not Specified by Manufacturer | | Specialties | Switchable Polarity
Selectable 350/700 Hz Midrange Frequency via Jumper
Selectable 600-Ohm Output Impedance via Jumper
4-Segment LED Output Level Meter | | Power Requirement | 24 VAC Power Adapter | | Dimensions (W x H x D) | 8.5 x 1.8 x 10.0" / 21.6 x 4.4 x 25.4 cm | | Weight | 4.6 lb / 2.1 kg |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 64 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Jumpdrive C20i...
Pacsafe Travel Safe 200...
Narink Pro Food chopper B871 users manual...
manual for: "Battery Charger CG-580"...
Dawnstar Electric Knife Sharpener Model: S858-2 user ...
|
|
