User manual
Haida 100mm Enthusiast Filter Kit

User Manual for Haida 100mm Enthusiast Filter Kit

• Product category: Filter Kits Haida
• Brand: Haida
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Haida Filter Kits

Product description

• 100-PRO 100mm Filter Holder Made of aluminum alloy for durability, the 100-PRO 100mm Filter Holder from Haida is compatible with 100mm filters with a thickness of up to 2mm. It comes equipped with three filter slots, allowing you to use different filters simultaneously to achieve a wide variety of effects. And even when stacking filters in front of a wide-angle lens, the holder avoids producing any noticeable vignetting in most cases. On the rear side of the filter holder is a built-in gasket, which helps block light from entering the lens coupling. This allows you to take long exposure shots without worrying about any stray light ruining your image. Several sizes of adapter rings are available separately for different lenses, ranging from 49mm to 82mm, and need to be purchased for proper use.
  • • Fits up to three 100mm filters simultaneously for achieving a wide variety of effects
    • Maximum filter thickness of 2mm
    • Built-in gasket blocks small amounts of stray light that can enter through the coupling and affect a long exposure photo
    • Avoids vignetting on most cases, even when stacking filters with wide-angle lenses
    • Made of durable aluminum alloy, accepts adapter rings that are available separately for purchase
• 67mm Adapter Ring for 100-PRO Series Filter Holder This 67mm Adapter Ring from Haida allows you to use the Haida 100-PRO insert filter holder with any lens that has 67mm front filter threads. It can be screwed onto the lens first, allowing you to then easily mount the holder, and is made of aluminum for durability.
• 72mm Adapter Ring for 100-PRO Series Filter Holder This 72mm Adapter Ring from Haida allows you to use the Haida 100-PRO insert filter holder with any lens that has 72mm front filter threads. It can be screwed onto the lens first, allowing you to then easily mount the holder, and is made of aluminum for durability.
• 77mm Adapter Ring for 100-PRO Series Filter Holder This 77mm Adapter Ring from Haida allows you to use the Haida 100-PRO insert filter holder with any lens that has 77mm front filter threads. It can be screwed onto the lens first, allowing you to then easily mount the holder, and is made of aluminum for durability.
• 82mm Adapter Ring for 100-PRO Series Filter Holder This 82mm Adapter Ring from Haida allows you to use the Haida 100-PRO insert filter holder with any lens that has 82mm front filter threads. It can be screwed onto the lens first, allowing you to then easily mount the holder, and is made of aluminum for durability.
• NanoPro MC Circular Polarizer Filter for 100-Pro Filter Holder This Haida NanoPro MC Circular Polarizer Filter is designed for use with the Haida 100-Pro Filter Holder. It helps to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface. The light from the sun naturally becomes partially polarized due to reflecting off electrons in air molecules, causing the light to scatter into what appears as haze. A polarizing filter arranges, and filters, this directionally polarized light perpendicularly to the reflected light, allowing for the absorption of much of this light. This results in a noticeable reduction of glare and reflections from non-metallic surfaces and an increase in the saturation of skies and foliage.
  
  A circular polarizer only differs from a linear polarizer in that it contains a quarter wave plane in addition to the linear polarizing filter. The addition of this quarter wave plane is to circularly polarize the linearly polarized light for the use of auto focus and exposure functions. Due to how the light is broken down and filtered with a linear polarizer, auto focus and exposure accuracy become skewed during use. When the light becomes circularly polarized, it permits the use of these functions.
  
  This filter is constructed from optical glass for clarity and color fidelity. To prevent internal ghosting and reflections, each glass surface includes 10 layers of anti-reflection coatings, which also offer greater protection to the filter substrate and help keep it clean for a longer period of time. The Nano coating associated with this NanoPro MC Circular Polarizer Filter provides an additional layer that results in an improved beading effect when the surface comes in contact with water or oil, allowing for more efficient cleaning.
  • Compatible with the Haida 100-Pro Filter Holder
  • Helps to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface
  • Polarizing filters arrange, and filter, directionally polarized light perpendicularly to the reflected light, allowing for the absorption of much of the light
  • Clears up haze in distant landscapes and provides more saturated, vivid colors
  • Strongest effect when used at a 90° angle from the sun
  • Circular polarizers are ideal for use with digital cameras and autofocus lenses where a linear polarizer will often disrupt auto exposure and focus features
  • 2.5x filter factor reduces exposure by 1.3 stops
  • Constructed from optical glass for clarity
  • Multi-coated to prevent internal ghosting and reflections
  • Aluminum-alloy filter ring for durability while remaining lightweight
  • Plastic filter case for storage and transport
• 100 x 100mm NanoPro MC ND 3.0 Filter (10-Stop) Expand the range of creative effects available to you with the 100 x 100mm NanoPro MC ND 3.0 Filter from Haida. This square neutral density filter is 2mm thick and features a 1000x filter factor, providing a 10-stop reduction in exposure across the entire image. This allows you to slow down shutter speeds to capture movement in your photos and use wider apertures in bright lighting situations.Made of optical glass, the filter is designed to provide a neutral performance that leaves no color cast and preserves image sharpness. Applied on both sides are several layers of coating which help reduce ghosting and reflections. The coating also makes the surface resistant to scratches and repels water, making it easier to clean when using the filter in inclement conditions.
  • • Solid 3.0 neutral density filter, with a 1000x filter factor that reduces exposure by 10 stops
    • Allows for reduced shutter speeds and wider apertures
    • For use with compatible square filter holders that accept a thickness of 2mm
    • Optical glass construction, designed to avoid color casts and preserve sharpness
    • Multi-coated to prevent reflections, repel water, and increase resistance to scratches
• 100 x 150mm NanoPro MC Soft Edge Graduated 0.9 Neutral Density Filter With a 8x filter factor that reduces exposure by 3 stops, this 100 x 150mm NanoPro MC Soft Edge Graduated 0.9 Neutral Density Filter from Haida is designed to darken select portions of your image without affecting image sharpness or color reproduction. It features a soft edge in its center, slowly fading from completely clear to partially darkened as we move towards the top. This allows the filter to keep bright skies under control without creating a line in the image. The NanoPro MC is made of optical glass and features a 2mm thickness compatible with a wide range of holders. Both sides of the filter are treated with several layers of coating, resulting in minimized reflections and increased resistance to scratches. The multi-coated construction also makes it easier to clean water and other debris from the glass surface, suiting it for use in the outdoors.
  • • 100 x 150mm soft graduated 0.9 ND filter, with a smooth transition from clear to a 3-stop reduction
    • 2mm thick optical glass multi-coated for better scratch resistance, minimal reflections, and easier cleaning
    • Designed to keep images sharp while avoiding color casts
  • 150 Insert Filter Pouch The Haida 150 Insert Filter Pouch is designed to provide a secure and convenient, transport and storage solution for any combination of up to six Haida 150 x 150mm or 150 x 170mm filters. Filters placed within this pouch are each held within one of six padded, nonabrasive slots. They can be easily accessed by opening its zippered closure and touch-tab fastened front flap which covers an outer pocket that can accommodate a Haida 150 filter holder kit.
    
    When photographing with a tripod and a Haida filter system, a loop along the rear of the Haida 150 Insert Filter Pouch allows it to be draped over that tripod, putting your filters in more immediate reach. This pouch's exterior is woven from nylon for durability, and an adjustable, clip-on shoulder strap allows for over-the-shoulder carrying as well.
    • • Designed to accommodate up to six Haida 150 x 150mm or 150 x 170mm filters
      • Soft, nonabrasive, cotton interior-lining
      • Outer front pocket can accommodate a Haida 150 filter holder kit
      • When photographing with a tripod, rear loop allows placement over that tripod, putting filters in more immediate reach
      • Clip-on shoulder strap
      • Zippered and touch-tab fastened closure
  In the Box Bundle Items 100-PRO 100mm Filter Holder asufuevvbaysauazxcvqswdztdyq
  • Limited 1-Year Warranty
  67mm Adapter Ring for 100-PRO Series Filter Holder
  • Limited 1-Year Warranty
  72mm Adapter Ring for 100-PRO Series Filter Holder
  • Limited 1-Year Warranty
  77mm Adapter Ring for 100-PRO Series Filter Holder asufuevvbaysauazxcvqswdztdyq
  • Limited 1-Year Warranty
  82mm Adapter Ring for 100-PRO Series Filter Holder
  • Limited 1-Year Warranty
  NanoPro MC Circular Polarizer Filter for 100-Pro Filter Holder asufuevvbaysauazxcvqswdztdyq
  • Filter Case
  • Limited 1-Year Warranty
  100 x 100mm NanoPro MC ND 3.0 Filter (10-Stop)
  • Limited 1-Year Warranty
  100 x 150mm NanoPro MC Soft Edge Graduated 0.9 Neutral Density Filter
  • Limited 1-Year Warranty
  150 Insert Filter Pouch
  • Shoulder Strap
  • Limited 1-Year Warranty

Also Includes

• Microfiber Cleaning Cloth

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• 100-PRO 100mm Filter Holder

  Filter Capacity	3 x 4 x 4", 100 x 100 mm, 100 x 150 mm, Haida 100 (2 mm Thick)
  Material	Aluminum

  Box Dimensions (LxWxH)	7.4 x 6.1 x 1.6"

• 67mm Adapter Ring for 100-PRO Series Filter Holder

  Compatible Lens Filter Thread	67 mm
  Filter Holder System	Haida 100
  Material	Aluminum

  Box Dimensions (LxWxH)	3.6 x 3.6 x 0.8"

• 72mm Adapter Ring for 100-PRO Series Filter Holder

  Compatible Lens Filter Thread	72 mm
  Filter Holder System	Haida 100
  Material	Aluminum

  Box Dimensions (LxWxH)	3.6 x 3.6 x 0.8"

• 77mm Adapter Ring for 100-PRO Series Filter Holder

  Compatible Lens Filter Thread	77 mm
  Filter Holder System	Haida 100
  Material	Aluminum

  Box Dimensions (LxWxH)	3.6 x 3.6 x 0.8"

• 82mm Adapter Ring for 100-PRO Series Filter Holder

  Compatible Lens Filter Thread	82 mm
  Filter Holder System	Haida 100
  Material	Aluminum

  Box Dimensions (LxWxH)	3.6 x 3.6 x 0.8"

• NanoPro MC Circular Polarizer Filter for 100-Pro Filter Holder

  Filter Type	Circular Polarizer
  Filter Factor	2.5 (1.3 Stop)
  Shape	Circle
  Rotating	No
  Filter Material	Glass
  Coatings	Multi-Coating

  Box Dimensions (LxWxH)	4.5 x 4.4 x 0.8"

• 100 x 100mm NanoPro MC ND 3.0 Filter (10-Stop)

  Filter Type	Solid ND
  Density	3.0 (10 Stops)
  Rectangular Size	3.94 x 3.94" / 100.0 x 100.0 mm
  Filter Thickness	0.08" / 2 mm
  Filter Material	Glass
  Coatings	Multi-Coating, Resistance Coating

  Box Dimensions (LxWxH)	7.1 x 5.1 x 0.8"

• 100 x 150mm NanoPro MC Soft Edge Graduated 0.9 Neutral Density Filter

  Filter Type	Graduated ND
  Graduation Type	Soft Edge
  Graduation Direction	Vertical
  Density	0.9 (3 Stops)
  Shape	Rectangle
  Rectangular Size	3.94 x 5.91" / 100.0 x 150.0 mm
  Filter Thickness	0.08" / 2 mm
  Filter Material	Glass
  Coatings	Multi-Coating, Resistance Coating

  Box Dimensions (LxWxH)	7.0 x 5.1 x 0.8"

• 150 Insert Filter Pouch

  Filter Capacity	6 x 5.9 x 6.7" / 150 x 170 mm
  Carrying/Transport Options	Shoulder Strap
  Type of Closure	Touch Fastener, Zipper
  Exterior Material	Nylon
  Interior Material	Cotton
  Exterior Dimensions	8.1 x 3.1 x 8.7" / 205.0 x 80.0 x 220.0 mm
  Weight	5.0 oz / 141.7 g

  Box Dimensions (LxWxH)	9.7 x 7.9 x 4.1"

Rating

Discussion