|
User Manual for Heil Sound PR 40 Microphone & PreSonus Studio Preamp Broadcaster Kit Click to enlarge the picture
Contents of the user manual for the Heil Sound PR 40 Microphone &
- Product category: Voice Over Microphones Others
- Brand: Others
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Others Voice Over Microphones
|
User manual for the Heil Sound PR 40 Microphone & contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Others product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Others user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Others product will considerably shorten its lifespan!
|
Product description The Heil Sound PR 40 Microphone & PreSonus Studio Preamp Broadcaster Kit from gives you everything you need to make high-quality broadcast voice recordings for radio, podcasts, and other voice recordings. The package includes the Heil Sound PR 40 Dynamic Cardioid Studio Microphone, PreSonus Studio Preamp & Compressor, mic suspension shockmount, 2-section broadcast arm, an XLR cable, a pack of touch fastener straps, and a foam windscreen. - Heil Sound PR 40 Dynamic Cardioid Studio Microphone (Champagne) The PR 40 Dynamic Cardioid Studio Microphone from Heil Sound is a high-performance dynamic microphone ideal for use as a vocal mic for talk-show hosts and other voice over applications. The large dynamic element produces a smooth response with an articulate and natural midrange. The size of the diaphragm, combined with a low mass and an efficient NdFeB magnet structure, allow the microphone to achieve a wide dynamic range and capture high SPLs, making it a great kick drum mic as well.
The microphone has 4 rear ports to reject off-axis noise, resulting in a smooth, tight cardioid pickup pattern with reduced proximity effect. The steel body and internal humbucking coil shield the microphone, making it safe for use near video monitors and noisy lighting fixtures. An internal Sorbothane shock mount decouples the microphone's dynamic element from the body to reduce the effects of handling noise. - Professional Sound
- The large dynamic element has a smooth frequency response with a natural and articulate midrange, making this an ideal mic for voice over applications
- Wide Dynamic Range
- The large size and low mass of the mic element, combined with a powerful NdFeB magnet structure, give the mic the ability to capture high SPLs while providing a wide dynamic range
- Cardioid Pickup Pattern
- The mic has 4 rear ports designed to reject off-axis noise, providing it with a smooth, tight cardioid pickup pattern
- Specialized Screen System
- The mic's screen system uses 2 different mesh screens and an internal filter to keep sibilance and plosives to a minimum
- Internal Shock Mount
- The internal Sorbothane mount decouples the mic element from the body, reducing the effects of handling noise
- Heavily Shielded
- The rugged steel body and internal hum bucking coil shield the microphone, allowing you to use it near video monitors and noisy light fixtures
- Assembled in the USA
- The PR 40 is assembled and tested in Illinois
UPC: 885936794014 - PreSonus Studio Channel The Presonus Studio Channel is a channel strip that features a tube preamp, a VCA compressor, and a 3-band parametric EQ. The tube preamp section features two knobs: Gain and Tube Drive. This allows you to adjust the amount of signal that hits the tube circuitry, opening up a wide range of sonic options. The VCA compressor section is well-suited to help all different kinds of audio sit nicely in a mix, whether it's percussion with fast transients, or smooth and silky vocals. The parametric EQ features a custom amplifier with a gain control on each of the 3 bands, with a variable Q knob on the mid frequency.If you're curious about outboard gear and want to upgrade your signal path from the stock preamp found on most audio interfaces, the Presonus Studio Channel is an excellent choice for deeper sonic exploration. Likewise, experienced professionals will appreciate the Studio Channel's solid set of sound shaping tools, as well as its afforable pricetag.
- Class-A Vacuum Tube Preamp
- The Studio Channel features a high-voltage 12AX7 tube with both Gain and Tube Drive controls, giving you the ability to dial in a variety of different tones.
- VU Meter
- The illuminated VU meter displays both output level and gain reduction.
- A Host of Useful Tools and Controls
-
- 80 Hz High-Pass Filter
- 20 dB Pad
- Phase Invert
- Make-Up Gain, Auto, and Soft (Compressor Section)
- Low Noise Design
UPC: 673454001000 - Heil Sound PRSM Shock Mount (Champagne) The champagne PRSM Shock Mount from Heil Sound is a flexible microphone support system that helps suppress low-frequency rumble by absorbing vibrations. It is designed for use with the large-diameter PR 30, PR 31 and PR 40 microphones. Its 5/8" threading mounts onto the PL2T Topless boom mount in addition to standard microphone stands. UPC: 885936790436
- Auray WCF-UB440 Foam Windscreen for Large Diaphragm Condenser Mics The Auray WCF-UB440 Foam Windscreen for the Senal UB-440 is made from specialty acoustic foam designed to reduce broadband wind noise with minimal high frequency loss. The density of the foam is optimized to help protect the microphone element from vocal plosives and wind pressure without dramatically muffling the sound. This windscreen is effective indoors for protection against drafts caused by air-conditioners and can be used in calm to light outdoor breeze conditions (0-7mph). It also reduces vocal plosives in close microphone placement situations. Users can generally expect a 4dB to 8dB reduction in wind noise, with very slight dampening of high frequencies. For most applications, the very slight high frequency dampening is a worthwhile exchange for the notable wind noise reduction. The WCF-UB440's foam is hypoallergenic and washable and helps prevent moisture and dirt from damaging your microphone. The windscreen has a height of 3.5" and is designed to fit over the Senal UB-440 as well as mics from AKG, Shure, Neumann, Mi-Tek, MXL, Behringer, SE Electronic, Rode and most other large diaphragm condensers with a grill diameter of larger than 2". The WCF-UB440 Foam Windscreen for the Senal UB-440 is an effective solution for basic wind protection.
- Fits these and other similar sized microphones:
-
- AKG 414, 420, C2000, 220, 120
- Shure KSM44A, KSM32/SL, SM27, PG42
- Rode NTK, NT1000, NT100, NT1
UPC: 847628569867 - Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable The Auray BAI-2X is a two-section broadcast arm with internal springs and an integrated XLR cable. This versatile and sturdy broadcast arm is great for studio as well as home use. It's ideal for broadcast, voiceover, and podcasts.
The BAI-2X broadcast arm is designed with internal springs that provide a clean and sleek look. The internal balance springs are precision engineered to support and hold in place microphones of up to 5 lb. (2.27 kg). The design also minimizes handling noise when re-positioning the arm. The broadcast arm features a standard 5/8"-27 microphone stud mount that is compatible with most shockmounts and microphone clips. The angle of the microphone stud mount can be adjusted and secured with the locking knob, and the angle is maintained when re-positioning the arm. This eliminates the need to readjust it every time the arm is moved. With an extension of up to 40 inches, and the ability to rotate the arm 360°, the BAI-2X allows for precise microphone placement.
The BAI-2X also features a heavy-duty combo mount that consists of a sturdy C-clamp and a heavy-metal desktop mount. The C-clamp is capable of fastening onto desktops up to 2.3" thick. The C-clamp's slim design minimizes the clearance needed to mount it between a desk and wall. The desktop mount detaches from the C-clamp and provides the option of permanent installation to a desktop with the mounting screws (included). A 14" riser is included for adding height to the broadcast arm in order to extend over computer or studio monitors. - Versatile
- Ideal for studios as well as home use
- Internal Springs
- Internal springs provide smooth, noise-free positioning and clean and sleek profile
- Sturdy
- Supports microphones up to 5 lb. (2.27 kg)
- Compatibility
- The 5/8"-27 standard microphone thread is compatible with most shockmounts and microphone clips
- Precision
- Extends up to 40" (101.6 cm) and rotates 360° allowing for precise microphone placement
- XLR Cable
- The integrated 15-foot (457.2 cm) XLR cable provides a secure, locking connection and excellent signal transfer
- Extra Height
- A 14" (13.6 cm) riser is included. It provides extra height to the broadcast arm for extending over computer or studio monitors
- Combo Mount
- The heavy-duty combo mount is comprised of a C-clamp for clamping to a desktop up to 2.3-inch (5.8 cm) thick, and a detachable desktop mount for permanent attachment to a desktop with the included screws
- 14" Riser
- The included riser adds 14" of height to the broadcast arm so that it can easily extend over computer or studio monitors
UPC: 847628578272 - Pearstone 0.5 x 6" Touch Fastener Straps (Black, 10-Pack) The black 10-pack of Pearstone 0.5 x 6" Touch Fastener Straps provides a cost-effective way to bundle and organize cables. The straps are easy to use, featuring a loop-through slot and touch fastener attachment. Each tie can be refastened at least 200 times.
- Reusable hundreds of times
- One-piece, double-sided touch fastener
- Easy to Use
-
- Wrap the strap around the first cable, fuzzy side out; feed the tail through the slot
- Pull the tail completely through the slot and push tab down to fasten
- Gather other cables to your first cable to make a tight bundle
- Wrap the strap around the bundle and fasten by pressing the strap onto itself
UPC: 847628021389 In the Box - PR 40 Dynamic Cardioid Studio Microphone (Champagne) tevtqceftbwaczfdyuxrbbw
- Padded Vinyl Carrying Case
- Microphone Stand Clip
- Limited 3-Year Warranty
- PreSonus - Studio Channel
- PRSM Shock Mount (Champagne)
- Auray - WCF-UB440 Foam Windscreen for Large Diaphragm Condenser Mics
- Auray - BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable
- Pearstone - 0.5 x 6" Touch Fastener Straps (Black, 10-Pack)
Table of Contents
|
Upload User Manual
Have you got an user manual for the Heil Sound PR 40 Microphone & PreSonus Studio Preamp Broadcaster Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Heil Sound PR 40 Dynamic Cardioid Studio Microphone (Champagne)
| Transducer | Dynamic | Polar Pattern | Cardioid | Frequency Range | 28 Hz to 18 kHz | Maximum SPL | 148 dB SPL | Impedance | 600 Ohms | Sensitivity | -53.9 dB at 1 kHz | | Output Connectors | 1 x 3-Pin XLR | Weight | 13.5 oz / 383 g | | Box Dimensions (LxWxH) | 10.65 x 7.05 x 3.85" | - PreSonus Studio Channel
Number of Channels | Single | Inputs | 1 x XLR 1 x 1/4" TS, unbalanced | Outputs | 1 x XLR 1 x 1/4" TRS, balanced | Frequency Response | 10 Hz to 50 kHz | Noise | -96 dBu | | Gain Range | -6 to +66 dB (+/-10 dB trim on line input) | Maximum Output | +22 dBu | Phantom Power | +48V | | Threshold Range | -40 to +2 dBu | Ratio | 1-10 (1:1 to 2:1) | Attack Time | 0.1 to 200 ms | Release Time | 0.05 to 3S ms | Sidechain | No | Frequency Bands | Low frequencies = variable from 40 to 500 Hz Mid frequencies = variable from 200 Hz to 3 kHz High frequencies = variable from 2 to 20 kHz | Range (Boost/Cut) | Low and high frequencies = variable between +/-10 dB Mid frequencies = variable from -10 to +10 dB | | Power Requirements | 120 VAC, 60 Hz for included external power adapter | Dimensions (WxDxH) | 19 x 5.5 x 1.75" (483 x 140 x 44 mm) | Weight | 5 lb (2.3 kg) | Specialties | Tube gain and tube drive EQ Pre/Post compressor switch | | Box Dimensions (LxWxH) | 23.8 x 12.0 x 4.9" | - Heil Sound PRSM Shock Mount (Champagne)
Dimensions (HxD) | 4.75 x 8.75" (12.1 x 22.2 cm) | Weight | Not specified by manufacturer | | Box Dimensions (LxWxH) | 5.95 x 5.4 x 5.0" | - Auray WCF-UB440 Foam Windscreen for Large Diaphragm Condenser Mics
| Box Dimensions (LxWxH) | 3.25 x 3.25 x 2.8" | - Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable
Length | 40" (101.6 cm) | Weight Capacity | 5 lb (2.27 kg) | Microphone Mount | 5/8"-27 standard microphone thread | Clamping Range | 2.3" (5.8 cm) | Riser | 14" (35.56 cm) | Cable | XLR M to XLR F: 15' (457.2 cm) | Weight | 4.47 lb. (2.02 kg) | | Box Dimensions (LxWxH) | 23.5 x 7.4 x 3.5" | - Pearstone 0.5 x 6" Touch Fastener Straps (Black, 10-Pack)
Quantity | 10 | Size | 0.5 x 6" (1.3 x 15.2 cm) | | Box Dimensions (LxWxH) | 6.4 x 3.7 x 0.6" |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 61 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
class 2 battery charger Rayovac model ps335... PNY USB-C 3.1... google Pixel 3a... Lenovo active pen 1
... canon mg 2525...
|
Discussion |
Latest contributions to the discussion:
Recharge Name: Sean Christopher Verch Motorola Talkabout T200 FRS GMRS Two-Way Ya can only recharge the battery that come with it with the USB cable won't charge the rechargeable battery's like energizer or Duracell ... Google Pixel 3 Name: Albert Miles Google Pixel 3 64GB Smartphone Is there a user manual available to download yet. I still wish to have one . My phone has frozen again, you cannot turn it off or on It comes to life again once its battery runs down and you have to put it on charge.. Any advice?... Delete info entered Name: Vickie & Robert Louthen Facebook Portal I have never used my Facebook Portal. My husband entered some items, how can I delete the info so I can sale the item. It was given to me as a gift. Thank You... query Name: Emile Martin SanDisk 128GB Ultra USB 3.0 Flash Hello, and thank you. How do I completely back up my Windows 10 computer including operating system, files, files on Google drive, and apps, so I can erase my computer's hard disk and reinstall the whole thing?... download or see the manual for vivobook s-14 Name: sue brown ASUS 14" VivoBook Flip 14 Multi-Touch i can't dl the manual without a charge..help please,,just want to see the laptop manual....
|
|