User Manual for HIVE LIGHTING Killer Plasma Maxi PAR Light Kit Click to enlarge the picture
Contents of the user manual for the HIVE LIGHTING Killer Plasma Maxi PAR
- Product category: HMI & Plasma Lights HIVE LIGHTING
- Brand: HIVE LIGHTING
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for HIVE LIGHTING HMI & Plasma Lights
|
User manual for the HIVE LIGHTING Killer Plasma Maxi PAR contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any HIVE LIGHTING product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official HIVE LIGHTING user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a HIVE LIGHTING product will considerably shorten its lifespan!
|
Product description An all-inclusive kit characterized by a unique lighting technology, the Killer Plasma Maxi PAR Light Kit from Hive Lighting pairs two Wasp Plasma PAR light heads with two 15' header cables, a multi-voltage 90-300 VAC dual power supply, two four-piece PAR lens sets, two five-piece scrim sets, two four-leaf barndoor sets, a double header stand mount, and a two-light hard rolling case for traveling with and protecting the whole kit. - Wasp Plasma PAR Light Kit with 15' Header Cable The Wasp Plasma PAR Light utilizes a single plasma bulb to produce a fine 10° spot beam angle with the equivalent output of a 400-4000W HMI, depending on accessory configuration, and can be further controlled using the included four-piece PAR lens set to provide narrow, medium, wide, and super wide beams.It features a CRI of 94 and has a nominal, daylight-balanced, correlated color temperature of 5600K, which can be adjusted from 4600-7000K using an on-board dial. Ideal for both still, movie, and stage applications, this light is also flicker-free, vibration and impact resistant, and the single point source bulb has been tested for a lifespan of 30,000 hours. It requires the separate purchase of a power supply for use.
- Wasp Dual Power Supply (90-300 VAC) This Wasp Dual Power Supply from Hive Lighting is a multi-voltage, 90-300 VAC power source for Wasp fixtures. Its dual design is compatible with two fixtures at a time and an inline switch offers convenient on/off control of both lights from a single point.
- Wasp PAR HDP 4 Lens Set Designed for the Hive Lighting Wasp Plasma PAR light, the Wasp PAR HDP 4 Lens Set includes narrow, medium, wide, and super wide lenses for controlling the light's beam angle and shape. These lenses are constructed from holographic diffusing polycarbonate (HDP) and are designed to imitate traditional glass PAR lenses, but have 20% higher transmission and are vibration and shatter resistant. UPC: 856211006269
- Wasp 5-Piece Scrim Set This Wasp 5-Piece Scrim Set from Hive Lighting allows you to selectively reduce the light intensity of the Wasp Plasma Light. The kit contains two single scrims, two double scrims, one 1/2 single scrim, one 1/2 double scrim and a scrim bag. Scrim diameter is 6.5". The set also fits the Bee light fixture.
- Wasp 4-Leaf Barndoor Set The Wasp 4-Leaf Barndoor Set by Hive is compatible with all Wasp lighting fixtures; they attach to the front, and are used to restrict and shape the light. Additionally, the set can rotate 360° and accepts grids and filters. UPC: 856211006252
- Killer Double Header Stand Mount (Black) With a shape similar to a football goal post, the black Killer Double Header Stand Mount from Hive is designed to hold and combine 2 Bee or Wasp light units. Simply mount the Killer Double Header to your light stand with the Baby mounting receiver located on the bottom, and then attach your lights to the baby light studs on either end. Made of strong, black, oxidized steel, the Killer Double Header is built to last. UPC: 856211006351
- Wasp Two Light Hard Rolling Case Transport and protect two lights and accessories from your Hive Kit with the black, Two Light Hard Rolling Case from Hive Lighting. The injection molded case with custom-fit foam is designed for Hive Killer and Bumblebee Lighting Kits. The foam inside is cut to hold the above kits but can be removed to suit your needs. This gasketed, waterproof, airtight case is designed to be unbreakable due to its high-strength polypropylene copolymer resin construction. Submersible by design, the Wasp hard case is resistant to corrosion and damage upon impact.
Featuring a continuous hinge molded into the plastic, the case lacks a weak point. The pressure equalization valve will aid in any necessary shipment, as it will release pressure without letting any water into the case. Along with the trigger release latch system, your two light kit will be secure in nearly every kind of transit condition. Additional security is provided by two reinforced steel locking holes preventing any cutting or clipping.
For added convenience when transporting your kit, the Hive Hard Case has a wide set of built-in inline wheels complimented by an injection molded pull handle. To balance a heavy load, utilize either the top snap-down rubber over-molded cushion grip handle or the over-sized double grip carrying handle on the side. If you need to carry the case with another person, it is equipped with grip handles on each end. After setting up your lights on set or location, easily stack your hard cases on top of each other to maximize your production space. - Construction
-
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion, and fungus resistant
- Complete gasket seal makes these cases watertight
- IP67 rated, automatic pressure equalization valve
- Resistant to corrosion and impact damage
- Continuous molded-in hinge
- Patented "trigger release" TSA Locking Latch system
- Carrying Options
-
- Snap-down rubber over-molded cushion grip handle
- Oversized double-grip carrying handle
- Grip handles on each end for two people to carry
- Injection molded pull handle
- Wide set of wheels
UPC: 856211006344 In the Box Bundle Items 2 x Wasp Plasma PAR Light Kit with 15' Header Cable cdvqasezxqbwycesqbyybcyuvvqbfrf Wasp Dual Power Supply (90-300 VAC) 2 x Wasp PAR HDP 4 Lens Set 2 x Wasp 5-Piece Scrim Set 2 x Wasp 4-Leaf Barndoor Set Killer Double Header Stand Mount (Black) Wasp Two Light Hard Rolling Case Table of Contents
|
Upload User Manual
Have you got an user manual for the HIVE LIGHTING Killer Plasma Maxi PAR Light Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Wasp Plasma PAR Light Kit with 15' Header Cable
| Light Source | Plasma lamp | | Lamp Life | 30,000 hr (50,000 hr to L70) | | Rating | 276 W | | Flicker Free | Yes, 450 MHz cycle, 225 million fps | | Color Temperature | Nominal daylight: 5600K CCT
Daylight dial: 4600 - 7000K (plus Moonlight EFX) | | Dimming | Yes | | CRI | 94+ | | Photometrics | At 5600K @ 10' (3.0 m)
No lens: 5,000 fc
10° Spot Narrow lens: 4,700 fc
26 x 11° Medium lens: 1,300 fc
58 x 18° Wide lens: 800 fc
58 x 58° Super lens: 391 fc | | Mount | 5/8" (16 mm) TVMP receiver | | Power | 90 - 277 VAC (with Hive AC power supply)
18 - 38 VDC (with Hive AC/DC power supply)
2.3 A @ 120 VAC, 9.8 A @ 28 VDC | | Accessory Size | 6.6 or 6.5" (170 or 165 mm) | | Operating Conditions | Minimum ambient temperature: -31°F (-35°C)
Maximum ambient temperature: 110°F (43°C)
Maximum operating altitude: 30,000' (9,144 m) | | Dimensions | 10.5 x 9.8 x 11" (266 x 248 x 280 mm)
14.5" (368 mm) From pin receiver to yoke mount | | Weight | 11.5 lb (5.2 kg) | | | | Box Dimensions (LxWxH) | 23.779 x 18.504 x 12.52" | - Wasp Dual Power Supply (90-300 VAC)
- Wasp PAR HDP 4 Lens Set
| | | Box Dimensions (LxWxH) | 14.0 x 10.0 x 1.0" | - Wasp 5-Piece Scrim Set
- Wasp 4-Leaf Barndoor Set
| Material | Aluminum | | Weight | 5 lb (2.3 kg) | | | | Box Dimensions (LxWxH) | 7.7 x 7.7 x 0.2" | - Killer Double Header Stand Mount (Black)
| Materials | Oxidized steel | | Dimensions | 7.0 x 13.0" / 17.8 x 33.0 cm | | Weight | 1.5 lb / 0.7 kg | | | | Box Dimensions (LxWxH) | 14.5 x 6.5 x 2.0" | - Wasp Two Light Hard Rolling Case
| | | Interior Dimensions | 29 x 18 x 14.5" / 74 x 46 x 37 cm | | Padding | Foam | | | | Closure Type | Latch | | Carry and Transport Options | 5 x Handle | | Casters | 2 | | Material of Construction | Polypropylene, Rubber | | Exterior Dimensions (W x H x D) | 31.5 x 20.5 x 15.7" / 80 x 52 x 40 cm | | Weight | 22 lb / 10 kg |
Rating90% users recommend this product to others. And what about you?
This product has already been rated by 33 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
