User manual
Honl Photo 16-Piece Master Small Flash

User Manual for Honl Photo 16-Piece Master Small Flash Lighting Kit

• Product category: Flash Modifiers Honl Photo
• Brand: Honl Photo
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Honl Photo Flash Modifiers

Product description

• Speed Strap for Speed System The HonlPhoto Speed Strap is the building block for the Speed System line of shoe-mount flash modifiers and accessories. The Speed Strap wraps around the head of any shoe mount flash unit, and has a non-slip underside, so it won't budge when attached. The strap provides a large "hook-and-loop" wraparound area, which allows you to quickly attach Speed Grids, Speed Gobos, Speed Snoots or Honl Gels.
  • One strap that works with a line of various HonlPhoto accessories
  • Eliminates rubber bands, tape or sticky residue from gluing attachment strips to the flash head
  UPC: 751751020013
• Traveller8 Softbox The Honl Photo Traveller8 Softbox can be used to create beautiful soft light on the go. The compact 11 x 9" softbox provides a pleasing circular catchlight in your subject's eyes. It is extremely easy to setup and attach to your shoe-mount flash unit. Just use the included speed strap. For traveling the softbox folds flat to tuck into your camera bag, and weighs less than 4 ounces. UPC: 854181002151
• 8" Speed Snoot/Reflector for Speed System The HonlPhoto 8" Speed Snoot/Reflector is part of the Honl Speed System, which allows you to add a line of different light modifiers to your flash unit. This 8" long Speed Snoot/Reflector attaches to the Speed Strap (offered separately), and can be used either as a snoot or a reflector. Used as a reflector, this flash accessory can be used to bounce and scatter the light output of a flash unit, to provide a more pleasing and even exposure. Shaped as a snoot, it will concentrate the light output from the flash into a much tighter beam, producing a dramatic cinematic lighting effect.
  • Made of tough ballistic nylon
  • Gray interior produces a soft falloff
  UPC: 751751020044
• Gobo Bounce Card for Speed System (Black/White) The HonlPhoto Gobo Bounce Card is a 4 x 7.5" two-sided bounce card, made of a tough black ballistic nylon on one side and a white polymer on the other. The white side can be used as a standard bounce card, to bounce and scatter the light output of the flash. The black side can be used to keep light from flaring into your lens when using a flash as a background or hair light. The Gobo Bounce Card connects directly to Speed Strap (sold separately).
  • Two-side bounce card
  • Combine two for a "barn door" setup
  UPC: 751751020020
• 1/8" Speed Grid for Speed System The HonlPhoto 1/8" Speed Grid is part of the Honl Speed System, which allows you to add a line of different light modifiers to your flash unit. The 1/8" Speed Grid attaches to the Speed Strap (offered separately), and dramatically narrows the beam of light that's put out by your shoe mount or handle mount flash. The effect is a small circle of light, with the size depending on flash-to-subject distance. Two versions are available, one with 1/4" grids and one with 1/8" grids. The 1/8" version produces a spot a few degrees narrower then the 1/4" version.
  • Ideal for dramatic lighting effects
  • Made of rugged ABS/polycarbonate
  UPC: 751751020068
• 1/4" Speed Grid for Speed System The HonlPhoto 1/4" Speed Grid is part of the Honl Speed System, which allows you to add a line of different light modifiers to your flash unit. The 1/4" Speed Grid attaches to the Speed Strap (offered separately), and dramatically narrows the beam of light that's put out by your shoe mount or handle mount flash. The effect is a small circle of light, with the size depending on flash-to-subject distance. Two versions are available, one with 1/4" grids and one with 1/8" grids. The 1/8" version produces a spot a few degrees narrower then the 1/4" version.
  • Ideal for dramatic lighting effects
  • Made of rugged ABS/polycarbonate
  UPC: 751751020051
• Flash Filter Roll-Up Case This Honl Photo Flash Filter Roll-Up case is a very quick and convenient way to carry up to 30 Honl Photo filters. The Filter Roll-Up makes it easy to identify filter colors and takes up minimal space in your camera bag. The case is constructed from ballistic nylon with nylon rip stop. Note: Filters not included
  • The Photo Filter Roll-Up is 5 x 20" (127 x 508mm) and only 5 x 2" (127 x 50.8mm) when rolled up, and it weighs 3 oz (85g)
  UPC: 854181002205
• Color Effects Filter Kit for Honl Photo Speed System The Honl Photo Color Effects Filter Kit adds a creative touch to your Honl Photo Speed System light modifiers.  It allows you to add various colors to your lighting source, from high-quality polyester gels from Lee, a leading manufacturer.  The gels are durable and fitted with hook-and-loop adhesive upon the edges to quickly attach to Honl Photo's Speed Straps.
  • Durable polyester gel filters manufactured from Lee, a leading manufacturer from England
  • Gels can be easily used in conjunction with Honl Photo snoots, gobos, and grids
  • Pre-cut and fitted with a thin strip of "hook-and-loop" tape to attach to Honl Photo Speed Straps
  • Kit includes 2 frosted filters for adding a highly-diffused and dispersed light as well as yellow, red, blue, and green color filters
  • Colored filters practical both for adding distinct background light as well as increasing contrast between tonal values in black & white imaging
  UPC: 751751020099
• Color Correction Filter Kit for Honl Photo Speed System The Honl Photo Color Correction Filter Kit is a great accessory for your Honl Photo Speed System light modifiers.  It allows you to match your flash's light output to the color balance of background lights, so that the room lights visible in your shots will look just as white and clean as the main illumination being provided by your strobe. The kit consists of a pair of 1/2 CTB filters (to adjust a tungsten light to appear as normal daylight), two each of full/half/quarter CTO filters (which lower the Kelvin color value of your flash to match tungsten lights), and two full CTO + green filters (which match your strobes' output to the color balance of typical fluorescent lighting). Instead of having perfectly-exposed subjects cast in front of dark rooms, or perfectly-exposed subjects with unnatural orange or green color casts upon the visible background lights, you'll now have the capacity for bright backgrounds with perfect color along with the easily-achieved perfectly-exposed subjects. The aid of a color meter can help you choose which filter to use, but they're very costly and fragile.  The easiest way to achieve proper balance is to have a professional white balance aid (such as ExpoDisc), and first take a color balance reading immediately adjacent to the background light.  After setting your camera with that color balance, experiment with the gel filters a few times, examining the skin tones of your subjects on your camera's screen.  When you find which gel renders your subjects most naturally, you then take a color balance reading with the gel in place upon your strobe, using the gel + strobe as the lighting source for your balance reading.  Set your camera to this balance of color, and you're left with perfect skin tones and background lights which should appear quite natural.
  • Durable polyester gel filters manufactured from Lee, a leading manufacturer from England
  • Gels can be easily used in conjunction with Honl Photo snoots, gobos, and grids
  • Pre-cut and fitted with a thin strip of "hook-and-loop" tape to attach to Honl Photo Speed Straps
  • Kit includes 3 CTO filters (used to adjust flash output to match background tungsten lights), 1 'Full CTO + Green' filter (used to adjust flash output to match background fluorescent lighting), and 1 1/2 CTB filter (used to adjust a tungsten lighting source to match normal daylight color balance)
  UPC: 751751020082
• Filter Kit: Autumn The HonlPhoto Filter Kit: Autumn is a set of filters that attach to the front of your flash's lens, adding color to your photos. These filters attach to the HonlPhoto Speed Strap (sold separately) and can be used in tandem with other HonlPhoto flash accessories. The usable filter area is 2.5 x 4" (6.35 x 10.2cm) and can be trimmed with scissors to fit your individual strobe unit.
  
  This kit includes 2 filters of each color:
  
  • Rust
  • Medium Blue-Green
  • Chocolate
  • Dark Salmon
  • Egg Yolk Yellow
  UPC: 854181002137
• System Carrying Bag The Honl Photo System Carrying Bag (Black) is a water-resistant nylon bag with a heavy-duty zipper. It also has a snap-hook on one end and a nylon loop used to attach the bag to other camera bags, light strands, etc. It is designed to carry the entire line of Honl Photo flash tools such as, Speed Snoots, Speed Grids, Speed Gobos, and filters.
  Construction
  • • Water-resistant nylon
    • Heavy-duty zipper
    • Snap-hook on one end and nylon loop at other end attaches to camera bags, light stands, etc
  • Carries the entire line of Honl Photo flash tools including, Speed Snoots, Speed Grids, Speed Gobos, and filters

• 1-Year Warranty

• Speed Strap

• Limited 1-Year Warranty

• Limited 1-Year Warranty

• Limited 1-Year Warranty

• Limited 1-Year Warranty

• Limited 1-Year Warranty

• 1-Year Warranty

• 2 x Yellow Gel Filter

• 2 x Bright Red Gel Filter

• 2 x Just Blue Gel Filter

• 2 x Moss Green Filter

• 2 x Heavy Frost Filter

• Limited 1-Year Warranty

• 2 x 1/2 CTB Gel Filter

• 2 x Full CTO Gel Filter

• 2 x 1/2 CTO Gel Filter

• 2 x 1/4 CTO Gel Filter

• 2 x Full+Green Gel Filter

• Limited 1-Year Warranty

• 2 x Rust Filter

• 2 x Medium Blue-Green Filter

• 2 x Chocolate Filter

• 2 x Dark Salmon Filter

• 2 x Egg Yolk Yellow Filter

• 1-Year Warranty

Also Includes

• 5" Gold/Silver Zebra Speed Snoot

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• Speed Strap for Speed System

  Box Dimensions (LxWxH)	6.55 x 5.05 x 0.85"

• Traveller8 Softbox

  Modifier Type

  Softbox

  Box Dimensions (LxWxH)	11.0 x 11.0 x 2.7"

• 8" Speed Snoot/Reflector for Speed System

  Modifier Type

  Reflector Snoot

  Box Dimensions (LxWxH)	12.0 x 10.1 x 0.2"

• Gobo Bounce Card for Speed System (Black/White)

  Modifier Type

  Reflector

  Box Dimensions (LxWxH)	7.7 x 4.35 x 0.45"

• 1/8" Speed Grid for Speed System

  Modifier Type	Grid
  Dimensions	H: 3.5 x W: 2.2" / H: 89.0 x W: 58.0 mm

  Box Dimensions (LxWxH)	5.0 x 4.6 x 1.4"

• 1/4" Speed Grid for Speed System

  Modifier Type	Grid
  Dimensions	H: 3.5 x W: 2.2" / H: 89.0 x W: 58.0 mm

  Box Dimensions (LxWxH)	7.05 x 5.25 x 1.35"

• Flash Filter Roll-Up Case

  Dimensions	Flat: 5 x 20" (127 x 508mm) Rolled-up: 5 x 2" (127 x 50.8mm)
  Weight	3 oz (85g)

  Box Dimensions (LxWxH)	5.2 x 5.0 x 1.0"

• Color Effects Filter Kit for Honl Photo Speed System

  Modifier Type

  Color Filter

  Box Dimensions (LxWxH)	4.803 x 3.78 x 0.63"

• Color Correction Filter Kit for Honl Photo Speed System

  Modifier Type

  Color Filter

  Box Dimensions (LxWxH)	5.0 x 5.0 x 0.6"

• Filter Kit: Autumn

  Modifier Type

  Color Filter

  Box Dimensions (LxWxH)	4.6 x 3.9 x 0.3"

• System Carrying Bag

  Material	Water-resistant nylon
  Type of Closure	Heavy-duty zipper
  Carrying/Transport Options	Handheld
  Weight	4.0 oz (113g)

  Box Dimensions (LxWxH)	10.0 x 7.0 x 1.0"

Rating

Discussion