User Manual for HPRC 2530 Resin Case with Soft, Padded Open Deck and Dividers Kit Click to enlarge the picture
Contents of the user manual for the HPRC 2530 Resin Case with Soft,
- Product category: Hard & Watertight Cases HPRC
- Brand: HPRC
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for HPRC Hard & Watertight Cases
 |
User manual for the HPRC 2530 Resin Case with Soft, contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any HPRC product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official HPRC user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a HPRC product will considerably shorten its lifespan!
|
Product description Studio Storage Solutions Read More The 2530 Resin Case from HPRC is a clamshell case that provides up to 20.2 x 11.3 x 5.2" of capacity and is designed to protect its contents from impacts, moisture, dirt, or corrosion while meeting the carry-on requirements for most airlines. Utilizing a polypropylene, fiberglass, rubber, and stainless-steel construction, the HPRC 2530 Resin Case is ATA 300, IP67, STANAG 4280, and DS 81-41 complaint. When closed, this clamshell case's interior is fully sealed from dust, as well as water from 5.9" to 3.3' deep, while providing long-lasting resistance to wear-and-tear.
The HPRC 2530 Resin Case's ergonomic, carry handle can be folded downward, helping to reduce the amount of space it occupies whether it is placed upright, or on its base. Four, molded feet elevate the base, protecting it from moisture and abrasive surfaces. While its lid faces upward, the clamshell case's interior can be reached by opening the two latches along the handle. The base and lid are joined by a pair of heavy-duty hinges, while the latches' double-hinged design prevents the HPRC 2530 Resin Case from accidentally opening due to bumps or shocks when in transit.
Both the base and lid include a pair of shackle eyelets that align when closing the HPRC 2530 Resin Case. Two separately available padlocks with 1/4" diameter shackles can then be installed along the handle for enhanced security. While closed, a built-in valve automatically equalizes air pressure between the interior and exterior of the clamshell case. This pressure valve is water-resistant and further prevents the HPRC 2530 Resin Case from accidentally opening during air travel or when moving from areas of low altitude to high altitude.
An HPRC Soft, Padded Open Deck and Dividers Kit for the HPRC 2530 Resin Case is also provided. Once installed, this divider kit helps maximize available carrying space, protects equipment or valuables for transport, and provides interior organization that can easily be rearranged along with changes to the contents of the clamshell case.
The HPRC Soft, Padded Open Deck and Dividers Kit consists of two perimeter insert sections, three divider sections, a bottom cushion, as well as one zippered, mesh accessory pocket. When the HPRC 2530 Resin Case is placed on its side with the handle folded downward, the perimeter insert sections can be installed on top of the bottom cushion, so that together, they conform to the interior of the clamshell case. Like the dividers and the bottom cushion, the zippered, mesh accessory pocket is constructed from nylon as well as cotton and can be affixed to the inside panel that faces the user when removing or placing items with the HPRC 2530 Resin Case. -
- Clamshell case with up to 20.2 x 11.3 x 5.2" of capacity that is designed to protect its contents from impacts, moisture, dirt, or corrosion
- Utilizes a polypropylene, fiberglass, rubber, and stainless-steel construction that is ATA 300, IP67, STANAG 4280, and DS 81-41 complaint
- Fully sealed from dust, as well as water from 5.9" to 3.3' deep, while providing long-lasting resistance to wear-and-tear
- Meets international and US carry-on size requirements for most airlines
- Ergonomic carry handle folds away, reducing the amount of space occupied by the clamshell case
- Double-hinged latches along the handle prevent accidental opening due to bumps or shocks when in transit
- Molded feet elevate the clamshell case's base, protecting it from surface moisture and abrasions
- Feet interlock with molded notches along the lid of another, closed HRPC 2530 Resin Case, allowing multiple HRPC 2530 Resin Cases to be safely stacked
- Built-in, water-resistant pressure valve further prevents the clamshell case from accidentally opening during air travel or when moving from areas of low altitude to high altitude
- Accommodates up to two separately available padlocks with 1/4" diameter shackles for enhanced security
- HPRC Soft, Padded Open Deck and Dividers Kit for 2530 Resin Case helps maximize available carrying space, protects equipment or valuables for transport, and provides interior organization that can easily be rearranged
- Soft, Padded Open Deck and Dividers Kit consists of two perimeter insert sections, three divider sections, a bottom cushion, as well as one zippered, mesh accessory pocket
UPC: 810145013656 In the Box HPRC 2530 Resin Case with Soft, Padded Open Deck and Dividers Kit Divider Kit for HPRC2530 Series Hard Resin Case (Black with Red Interior) Limited Lifetime Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the HPRC 2530 Resin Case with Soft, Padded Open Deck and Dividers Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersHPRC 2530 Specs | Material | HPRC Resin Case 2530: Polypropylene, fiberglass, rubber, stainless-steel
HPRC Soft, Padded Open Deck and Dividers Kit for 2530 Resin Case: Nylon, cotton | | Type of Closure | Double-hinged locks
Integrated eyelets for separately available padlocks with 1/4" diameter shackles | | Carrying Options | Carry handle | | Certifications & Ratings | ATA 300, IP67, STANAG 4280, DS 81-41 | | Temperature Rating | -40.0 to 176.0°F (-40.0 to 80.0°C) | | Dimensions | Exterior: 21.3 x 13.8 x 5.3" (54.0 x 35.0 x 13.5 cm)
Interior: 20.2 x 11.3 x 5.2" (51.3 x 28.8 x 13.2 cm) | | Weight | Empty: 7.1 lb (3.2 kg)
With Soft, Padded Open Deck and Dividers Kit: 7.2 lb (3.3 kg) | | | | Package Weight | 6.0 lb | | Box Dimensions (LxWxH) | 20.2 x 11.34 x 5.2" |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 28 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
