|
User Manual for HPRC 4300 Resin Case with Soft, Padded Open Deck and Dividers Kit Click to enlarge the picture
Contents of the user manual for the HPRC 4300 Resin Case with Soft,
- Product category: Hard & Watertight Cases HPRC
- Brand: HPRC
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for HPRC Hard & Watertight Cases
 |
User manual for the HPRC 4300 Resin Case with Soft, contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any HPRC product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official HPRC user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a HPRC product will considerably shorten its lifespan!
|
Product description Studio Storage Solutions Read More The 4300 Resin Case from HPRC provides up to 23.0 x 12.6 x 12.2" of capacity and is designed to protect its contents from impacts, moisture, dirt, or corrosion. It features three handles, a lid handle for one-handed use with easily carried loads, as well as two side handles to safely lift and hold heavier loads. Utilizing a polypropylene, fiberglass, rubber, and stainless-steel construction, the HPRC 4300 Resin Case is ATA 300, IP67, STANAG 4280, and DS 81-41 complaint. When closed, this case's interior is fully sealed from dust, as well as water from 5.9" to 3.3' deep, while providing long-lasting resistance to wear-and-tear.
Each of the HPRC 4300 Resin Case's ergonomic, carry handles can be folded downward, helping to reduce the amount of space it occupies. Four molded feet elevate the HPRC 4300 Resin Case's base, protecting it from wet and abrasive surfaces. While its lid faces upward, the case's interior can be reached by opening its four, double-hinged latches. The base and lid are joined by a pair of heavy-duty hinges, while the latches' design prevents the HPRC 4300 Resin Case from accidentally opening due to bumps or shocks when in transit.
Both the base and lid include a pair of shackle eyelets that align when closing the HPRC 4300 Resin Case. Two separately available padlocks with 1/4" diameter shackles can then be installed for enhanced security. While closed, a built-in valve automatically equalizes air pressure between the interior and exterior of the case. This pressure valve is water-resistant and further prevents the HPRC 4300 Resin Case from accidentally opening during air travel or when moving from areas of low altitude to high altitude.
An HPRC Soft, Padded Open Deck and Dividers Kit for the HPRC 4300 Resin Case is also provided. Once installed, this divider kit helps maximize available carrying space, protects equipment or valuables for transport, and provides interior organization that can easily be rearranged along with changes to the contents of the case.
The HPRC Soft, Padded Open Deck and Dividers Kit consists of two perimeter insert sections, three divider sections, two bottom cushion sections, as well as one zippered, mesh accessory pocket. The perimeter insert sections can be installed on top of the bottom cushions, so that together, they conform to the interior of the case. Like the dividers and the bottom cushions, the zippered, mesh accessory pocket is constructed from nylon as well as cotton and can be affixed to the inside panel that faces the user when removing or placing items with the HPRC 4300 Resin Case. -
- Provides up to 23.0 x 12.6 x 12.2" of capacity that is designed to protect its contents from impacts, moisture, dirt, or corrosion
- Utilizes a polypropylene, fiberglass, rubber, and stainless-steel construction that is ATA 300, IP67, STANAG 4280, and DS 81-41 complaint
- Fully sealed from dust, as well as water from 5.9" to 3.3' deep, while providing long-lasting resistance to wear-and-tear
- Features three ergonomic handles, a lid handle for one-handed use with easily carried loads, as well as two side handles to safely lift and hold heavier loads
- Handles fold away, reducing the amount of space occupied by the case
- Four, double-hinged latches prevent accidental opening due to bumps or shocks when in transit
- Molded feet elevate the case's base, protecting it from surface moisture and abrasions
- Feet interlock with molded notches along the lid of another, closed HRPC 4300 Resin Case, allowing multiple HRPC 4300 Resin Cases to be safely stacked
- Built-in, water-resistant pressure valve further prevents the case from accidentally opening during air travel or when moving from areas of low altitude to high altitude
- Accommodates up to two separately available padlocks with 1/4" diameter shackles for enhanced security
- See-through identification pocket along the case's front can be used to display a contents label, or owner information
- HPRC Soft, Padded Open Deck and Dividers Kit for 4300 Resin Case helps maximize available carrying space, protects equipment or valuables for transport, and provides interior organization that can easily be rearranged
- Soft, Padded Open Deck and Dividers Kit consists of two perimeter insert sections, three divider sections, two bottom cushion sections, as well as one zippered, mesh accessory pocket
UPC: 810145013410 In the Box HPRC 4300 Resin Case with Soft, Padded Open Deck and Dividers Kit Divider Kit for HPRC4300 Hard Resin Case (Black) Limited Lifetime Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the HPRC 4300 Resin Case with Soft, Padded Open Deck and Dividers Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersHPRC HPRC4300SFDBLK Specs | Material | HPRC Resin Case 4300: Polypropylene, fiberglass, rubber, stainless-steel
HPRC Soft, Padded Open Deck and Dividers Kit for 4300 Resin Case: Nylon, cotton | | Type of Closure | Double-hinged locks
Integrated eyelets for separately available padlocks with 1/4" diameter shackles | | Carrying Options | Carry handle | | Certifications & Ratings | ATA 300, IP67, STANAG 4280, DS 81-41 | | Temperature Rating | -40.0 to 176.0°F (-40.0 to 80.0°C) | | Dimensions | Exterior: 27.2 x 15.0 x 14.0" (69.0 x 38.0 x 35.5 cm)
Interior: 23.0 x 12.6 x 12.2" (58.5 x 32.0 x 30.9 cm) | | Weight | Empty: 14.3 lb (6.5 kg)
With Soft, Padded Open Deck and Dividers Kit: 17.3 lb (7.8 kg) | | | | Package Weight | 20.2 lb | | Box Dimensions (LxWxH) | 27.9 x 15.9 x 15.3" |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 45 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Swan Bread maker SWBBA7...
Expert intel sixcore i5-8400 4GHZ turbo...
Color LaserJet Pro MFP M281fdw...
call of duty world war II...
Audio Technica AUDIO-AT8631
data sheet ...
|
| Discussion |
Latest contributions to the discussion:
Query
Name: Geoff Dibblee
Carson zOrb Digital USB Microscope
when useing the zorb it will not cover the whole of a stamp back or front as i am useing it for perfins stamps and whati have recived in the box just covers half a letter please can you help me to find away to enlarg the whole stamp
...
Blown transformer
Name: Dik Schouten
Demeter VTDB-2 Single Channel Tube Direct
Dear Sirs,where can i buy a new transformer for my VTDB 2b? If possible een 230 volt primary site...Y.S. Dik Schouten
...
Battery charger light does not turn yellow or green when charging LP-E17
Name: DAVE
Canon LC-E17 Charger for LP-E17 Battery
I have a new Canon battery charger for EOS R10 Camera. It has lights that turn yellow and green when charging the Canon battery that came with the camera. But when I put in the BM battery LP-E17 no lights come on. I can tell the battery is charged when I put it in the camera, b...
Stiff center dial wheel
Name: Reynolds, Jane
Tasco 10x50 Essentials Porro Binocular
It is very hard for me to turn the center wheel with the ridges on it.
Could you please email me the user manual for the Tasco 10 x 50 mm zip focus? Thank you...
Redfield 2-7x33
Name: Mike
Redfield 2-7x33 Revolution Riflescope
Can the elevation and windage knobs be reset to zero?
Thanks!...
|
|
