|
User Manual for IDX System Technology CW-1 Wireless Transmission System with TX Adapter and Watson NP-F975 Kit Click to enlarge the picture
Contents of the user manual for the IDX System Technology CW-1 Wireless Transmission
- Product category: Wireless Transmission Systems IDX System Technology
- Brand: IDX System Technology
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for IDX System Technology Wireless Transmission Systems
|
User manual for the IDX System Technology CW-1 Wireless Transmission contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any IDX System Technology product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official IDX System Technology user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a IDX System Technology product will considerably shorten its lifespan!
|
Product description The IDX CW-1 Wireless Transmission System with TX Adapter and Watson NP-F975 Kit from B&H includes a low latency wireless HDMI transmitter/receiver set, a camera-mountable battery adapter for the transmitter, and a Watson NP-F975 type battery. The Tx/Rx set wirelessly transmits up to 1080p30/i60 uncompressed video with embedded audio 30 ft to 300 ft with less than 1 ms latency. It operates over WHDI smart antenna technology on the license free 5 GHz frequency band. The battery adapter allows powering the TX with a battery and mounting it on-camera. - IDX System Technology Battery Adapter for CW-1 TX Transmitter (L-Series) Power your CW1-TX Transmitter with an L-Series battery using this dedicated Battery Adapter from IDX. The adapter features a cold shoe on the bottom and a receptacle on the side that holds the transmitter, so you can camera-mount the entire setup as a single unit.
The cold shoe is secured into a 1/4"-20 mounting thread on the bottom of the adapter by a 1/4"-20 screw that comes out of its other end. It can be removed to reveal the mounting thread to allow other ways of mounting the adapter. It can also be flipped over and attached into a sled on the bottom of the adapter, in which case it will provide you with a 1/4"-20 screw to use to mount the adapter.
The adapter features a USB output and plugs into the CW-1 transmitter via a USB connection. You can use the USB-to-mini-USB cable included with the CW-1 system. The L-Series battery is sold separately. UPC: 825781012581 - Watson NP-F975 Lithium-Ion Battery Pack (7.4V, 7800mAh) The Watson NP-F975 Lithium-Ion Battery Pack works with the same cameras as the Sony NP-F970 series batteries. This replacement battery pack features a capacity of 7800mAh, 7.4V of output power, and 57.72 watt hours. Small and lightweight, lithium-ion batteries can be charged or discharged at any time without developing memory effects.
- Compatible Cameras
- Sony
- DCR-SD1000
- DCR-SR40
- DCR-TRV900
- DCR-VX2000
- DCR-VX2100
- DCR-VX2200
- HDR-AX2000
- HDR-FX1
- HDR-FX7
- HDR-FX1000
- HVR-HD1000
- HVR-V1
- HVR-Z1
- HVR-Z5
- HVR-Z7
- HXR-MC1500
- HXR-MC2000
- HXR-NX5
- HXR-NX5R
- NEX-EA50
- NEX-FS100
- NEX-FS700
UPC: 847628541078 In the Box - Battery Adapter for CW-1 TX Transmitter (L-Series) yastzeetuvfructdsufurrcrybbvbavzebvv
- Limited 2-Year Warranty
- Watson - NP-F975 Lithium-Ion Battery Pack (7.4V, 7800mAh)
Table of Contents
|
Upload User Manual
Have you got an user manual for the IDX System Technology CW-1 Wireless Transmission System with TX Adapter and Watson NP-F975 Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - IDX System Technology Battery Adapter for CW-1 TX Transmitter (L-Series)
Supported Battery | Sony or 3rd-party L-Series | Input Voltage | 6 - 9 VDC | Power Output | 5 VDC USB | Dimensions | 4.4 x 1.3 x 2.3" (11 x 3 x 6 cm) | Weight | Approx. 0.55 lb (8.8 oz) | | Box Dimensions (LxWxH) | 7.95 x 6.25 x 3.2" | - Watson NP-F975 Lithium-Ion Battery Pack (7.4V, 7800mAh)
Mount / Series Type | Sony L-Series | Chemistry | Lithium-Ion | Capacity (Wh) | 57.72 Wh | Amp-Hours | 7800 mAh | Output Voltage | 7.4 VDC | Dimensions (W x H x D) | 2.8 x 1.5 x 2.4" / 70.0 x 39.0 x 60.0 mm | Weight | 10.3 oz / 292 g | | Box Dimensions (LxWxH) | 5.4 x 2.9 x 1.9" |
Rating94% users recommend this product to others. And what about you?

This product has already been rated by 63 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
pocket quadcopter RIV-YT320... CYBERPOWERPC GMA6200BSTV2... FUJINON ERD-30A-D01A ZOOM DEMAND CONTROLLER
... Just bought from Bestbuy Cyberpower,GMA5600BSTV4,model C series
another number on the label ET8252-10294
CECModel:CS450217MB492126 mfg date 043025
... Vortex crossfire ii 6-24x50
I essentially want to return my scope to mechanical zero. This has been on a couple rifles and I would like to set f...
|
|