|
User Manual for iFootage M1-III Mini Crane with T3 Wild Bull Tripod Click to enlarge the picture
Contents of the user manual for the iFootage M1-III Mini Crane with T3
- Product category: Cranes & Jibs iFootage
- Brand: iFootage
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for iFootage Cranes & Jibs
|
User manual for the iFootage M1-III Mini Crane with T3 contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any iFootage product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official iFootage user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a iFootage product will considerably shorten its lifespan!
|
Product description This B&H kit of the iFootage M1-III Mini Crane with T3 Wild Bull Tripod is assembled to provide you with a compact, portable jib arm and adjustable tripod legs. Featuring a square tube design for additional stability, the M1-III has a maximum payload of 33 pounds in standard mode and 22 pounds in low-angle mode, plus optional counterweights. The main jib arm is telescoping and can extend from 3.2 feet to just over 7 feet long. The camera mounting plate has both a flat and a ball mount, enabling you to mount a camera directly to the M1-III or mount a fluid head (with a 60 or 75mm ball).
The included carbon fiber legs support up to 132 pounds, so they can easily support the M1-III's 33-pound payload and appropriate counterweights. It features a mid-level spreader, spiked feet and removable foot pads so that you can use it in interiors or on hard surfaces with the foot pads. When working on soft or loose surfaces, you can use the foot spikes to gain greater traction. The legs feature a height range of 19 to 59". Note: Low-mode use requires the M1 Low Profile Quick-Release Adapter.
Counterweights are not included. - iFootage Wild Bull T3 Carbon Fiber Tripod With a load capacity of up to 132 pounds, the Wild Bull T3 Carbon Fiber Tripod from iFootage is designed for professional use. This three-section tripod features quick-release levers enabling quick, one-handed height adjustments. The standard height Wild Bull T3 Carbon Fiber Tripod can be extended from 29" to 59" with a minimum height of 19" at maximum spread. The tripod incorporates a mid-level spreader for increased stability and can be used with a ground spreader (not included). The carbon fiber legs end in spiked feet for a firm grip on uneven terrain. Removable rubber foot pads are included for use on flat surfaces. A 75/100mm half ball adapter is included for use with flat base tripod heads.
Features - Compatible with both 100 and 75mm ball tripod heads
- Pro-style, three-section tripod supports up to a 132-pound load
- Standard tripod extends from 29" to 59" with a minimum height of 19" at maximum spread
- Carbon fiber legs end in spiked feet for use on rough terrain; rubber foot pads are included for use on flat surfaces
- Locking quick release levers enable you to adjust the tripod's height using just one hand
- The included mid-level spreader increases the tripods stability; it may also be used with a ground spreader (not included)
- A half ball adapter and tie-down knob are included for use with 75/100mm flat base tripod heads
- iFootage M1-III Mini Crane Jib Arm The M1-III Mini Crane from iFootage is a compact, portable jib arm featuring lightweight carbon-fiber construction, a telescoping square-arm tube, and multiple mounting options. Its square tube design helps to minimize potential shaking during operation. The M1-III has a maximum payload of 33 lb in standard mode and 22 lb in low-angle mode. The main jib arm and the counterweight arm each have one telescoping stage (two sections) with locking thumb-lever knobs. Standard barbell weights (available separately) may be used as counterweights.Mount your DSLR (or other small camera) on either of two included quick release plates: the M1 or the Motion X2. The M1 plate has both a flat camera plate and a ball mount, enabling use of a fluid head (with a 60 or 75mm ball). The Motion X2 plate is used with micro cameras or when using wide- angle lenses. Both the arm base and the camera base incorporate 1/4"-20 & 3/8"-16 holes for mounting accessories.The adjustable tilt-damping knob, the tilt lock, and the pan drag function give you added control over your crane shots. For programmable moves, the M1-III can be used with the iFootage Motion X2 or other motion control systems. Note: Low-mode use requires the M1 Low Profile Quick-Release Adapter (available separately).
Counterweights are not included. - 33 lb load capacity in standard mode, 22 lb in low mode
- Lightweight, carbon fiber, telescoping square-tubed main arm
- Compatible with 75mm ball or flat base–tripod heads
- Locking, damping-controlled tilt function, and pan drag control
- Camera can be mounted using the included quick-release plate or via a 60 or 75mm bowl head
- Quick-release plates have both 1/4"-20 & 3/8"-16 threaded holes
- Accessories can be mounted to the arm base and the camera base via 1/4"-20 & 3/8"-16 threaded holes
- Standard barbell weights can be used as counterweights
- iFootage Low-Profile Quick Release Adapter for M1-III Mini Crane This Low-Profile Quick Release Adapter for M1-III Mini Crane from iFootage is designed for low-angle and low-mode shots. Use this quick release adapter to undersling your camera on the crane.
In the Box - Wild Bull T3 Carbon Fiber Tripod dwqereeq
- Mid-Level Spreader
- 75/100mm Half Ball Adapter
- Adapter Tie-Down
- 3 x Rubber Foot Pads
- Carrying Bag
- Limited 1-Year Warranty
- M1-III Mini Crane Jib Arm
Includes Free - Low-Profile Quick Release Adapter for M1-III Mini Crane
Table of Contents
|
Upload User Manual
Have you got an user manual for the iFootage M1-III Mini Crane with T3 Wild Bull Tripod in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - iFootage Wild Bull T3 Carbon Fiber Tripod
| | | Head Mount Type | 3/8"-16 Male | | Load Capacity | 132 lb / 60 kg | | Maximum Working Height | 59" / 150 cm | | Minimum Working Height | 19" / 49 cm | | Folded Length | 30" / 750 mm | | Materials | Carbon Fiber | | Weight | 11 lb / 5 kg | | | | Box Dimensions (LxWxH) | 37.0 x 7.85 x 6.5" | - iFootage M1-III Mini Crane Jib Arm
| Material of Construction | 20-layer carbon fiber
Aluminum alloy
Magnesium alloy | | Maximum Load Capacity | Standard Mode: 33 lb (15 kg)
Low-Angle Mode: 22 lb (10 kg) | | Tripod Mount Types | Crane: 75 mm bowl, flat base
M1 Camera Plate: 60, 75 mm bowl | | Tilt Range | 0-25° | | Tube Diameter | 1.7 x 1.6" (43 x 40 mm) | | Maximum Reach | 3.9' (1.2 m) | | Telescoping Range | 3.2 - 7.1' (1 - 2.2 m) | | Weight | 8.4 lb (3.8 kg) | | | | Box Dimensions (LxWxH) | 39.0 x 9.0 x 5.0" | - iFootage Low-Profile Quick Release Adapter for M1-III Mini Crane
| Maximum Load Capacity | 22 lb / 10 kg | | | | Box Dimensions (LxWxH) | 3.75 x 3.6 x 2.1" |
Rating60% users recommend this product to others. And what about you?
This product has already been rated by 49 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Milano Carbon Fiber Tripod with B1 Head...
c.PLASMA X LARGE SIN/SION user manual-pdf
centrotherm PECVD platform c.PLASMA...
Streamlight Macrostream...
AOC curved gaming monitor...
User manual for Bowens ML500 Flash head ...
|
| Discussion |
Latest contributions to the discussion:
SQ 7 PDF
Name: Yash Deshmukh
Allen & Heath SQ-7 48-Channel 36-Bus
I want to download PDF ...
Business Card Studio 10
Name: Yvon
Summitsoft Business Card Studio Pro
Business Card Studio 10 will not print. Window 11
My printer will print anything else....
REQUESTING FOR QUOTE
Name: ALBERT GABRIEL
Auray X-Style Piano Bench & Double
RFQ 919
S/ N DESCRIPTION UNIT QTY
1 KEYBOARD
YAMAHA MODEL
PSR-S750 61-KEY
DIGITAL
WORKSTATION PCS 1
2 AURAY DOUBLE-X
KEYBOARD
STAND WITH
PULL LOCK MFR
#KSPL-2X PCS 1
3 YAMAHA YBA-611
ARTISTE SERIES
KEYBOARD BAG
FOR 61-KEY
PORTABLE
KEYBOARDS PCS 1
4 AURAY FP-P1...
Leatherman Micra
Name: Rebecca Burgess
Leatherman Micra Tool with Box
Please send me a user's manual for Leatherman Micra...
total cost of Casio CTK 3500 61 key manual
Name: Eric Sensiba
Casio CTK-3500 61-Key Keyboard with Touch
What is the total cost for a Casio CTK 3500 61 key Electronic keyboard manual including taxes and shipping t85739?...
|
|
