User Manual for IK Multimedia Ampeg SVX 1 & 2 Bundle - Collections of Bass Amplifier and Cabinet Emulations for AmpliTube Plug-In Click to enlarge the picture
Contents of the user manual for the IK Multimedia Ampeg SVX 1 &
- Product category: Virtual Processor Plug-Ins IK Multimedia
- Brand: IK Multimedia
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for IK Multimedia Virtual Processor Plug-Ins
|
User manual for the IK Multimedia Ampeg SVX 1 & contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any IK Multimedia product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official IK Multimedia user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a IK Multimedia product will considerably shorten its lifespan!
|
Product description Designed to run within the AmpliTube Custom Shop plug-in, IK Multimedia Ampeg SVX 1 & 2 Bundle includes Ampeg SVX and Ampeg SVX 2, a collection of emulations which aim to digitize the distinctive tone of Ampeg bass rigs. With this download you get seven amplifier emulations, nine cabinet models, six microphone setups for the cabinets, and eight stompbox simulations for use with electric basses.
This software is compatible with Mac and Windows platforms, and works in VST2, VST3, AU, and AAX formats running at 64-bit. It also operates as a standalone application, in which case you'll have access to a multitrack recorder to capture ideas. - Ampeg SVX - Bass Amplifier and Cabinet Emulation Software (Plug-In, Download) Available for download, IK Multimedia’s Ampeg SVX is software that emulates the world-renowned and well-regarded sound of Ampeg amplifier heads and speaker cabinets. It also provides models of the microphones used to capture these cabinets in the studio, as well as a comprehensive pedalboard with overdrive, wah, chorus, envelope filtering, and more. You’ll even find a digital, accurate, and chromatic tuner.It is primarily intended to be used with electric basses, though it has been known to sound good on guitars, keyboards, or any signal to which you’d like to lend the sound of an emulated bass amplifier. Indeed, it has been designed with a stereo path to encourage such experimentation.The software uses Dynamic Saturation Modeling and Volumetric Response Modeling technologies to provide a realistic emulation of Ampeg gear. As such, it is a suitable choice for producers, mixing engineers, and other studio stalwarts looking to impart more mojo upon a relatively dry DI’ed bass tone. It should be noted, however, that integration with IK Multimedia’s series of hardware products offers you the ability to use this software onstage, and therefore, to bring the sound of Ampeg hardware to your live gig in a comparatively compact form factor.Many presets have been provided to get you started. They are tagged extensively for advanced search, and are designed to offer great bass timbres out of the gate. Any preset you build for yourself can be shared, if you choose, using Preset Xchange—though you can also keep them to yourself; the decision is yours. The software operates in 64-bit, is compatible with Mac and Windows platforms, and works in Audio Units, VST2, VST3, and AAX formats. It also operates as a standalone application, in which case you’ll have access to a multitrack recorder to capture ideas.
Key Features - Pedalboard with Eight Stompboxes
- In this section, you'll find a selection of bass-tone modifiers in stompbox form. These bass behemoths include the SCP-OD Bass Overdrive, the SCP-OCT Bass Octave, an analog chorus, analog delay, envelope filter, bass wah, compressor and volume pedal. These can be arranged in any order you choose, and they drive the amplifier-head directly. Also, you can assign knobs (parameters) to a controller like the StealthPedal with a simple right-click of the mouse.
- Four Modeled Amplifier Heads
- The Ampeg SVX provides four amp heads for use: the SVT-CL, the B-15 PortaFlex, the SVT-4Pro, and the BA500. The SVT-Classic provides Ampeg's patented hi- and low-boost buttons, as well a traditional three-band tone stack with selectable center frequencies, a gain knob, and a master knob. The PortaFlex offers a more vintage tube-like tone. The BA-500 and the SVT-4Pro both offer graphic EQ's alongside their traditional tone stack, though the SVT-4Pro also provides onboard compression. The BA-500 is modeled on a combo-amplifier, but the preamp and power sections have been separated from the cabinet sections with digital, surgical precision.
- Six Modeled Amplifier Cabinets and Corresponding Microphones Provided
- Your choices are as follows: The SVT810E-a mainstay of major tours, arenas, clubs, and stages-the SVT410H, the BXT-410H, the B-15 Single 15", the BA500 2x10, and the PB2x12. All cabinets have been realistically modelled down to the knobs on the back which affect the high frequencies. Any cabinet can be mixed and matched with any amplifier head. You'll also find six microphone choices for capturing the audio of these cabs: four dynamic mics and two condensers. These can be moved around the speaker cones with the click-and-drag of your mouse.
- Ampeg SVX 2 - Collection of Bass Amplifier and Cabinet Emulations for AmpliTube Plug-In (Download) Designed to run within the AmpliTube Custom Shop plug-in, IK Multimedia Ampeg SVX 2 offers a collection of bass amplifiers and cabs that emulate the world-renowned and well-regarded sound of Ampeg amplifier heads and their matched speaker cabinets. It is primarily intended to be used with electric basses, though it has been known to sound good on guitars, keyboards, or any signal to which you'd like to lend the sound of a bass amplifier.Ampeg SVX 2 employs the company's Dynamic Interaction Modeling technology to recreate the fine interactions of complete internal circuit stages of the original models and reproduce their unmistakable vibe and dynamics down to their finest nuances. You can further customize your bass sound using the AmpliTube Custom Shop's full-rig signal path, with tuner, pedalboards, amp head preamp, effects loop, power amp, speaker cabs, mics with room effects, and post-rack effects.
Key Features -
- Virtual gear collection for use with AmpliTube Custom Shop plug-in
- Officially licensed by Ampeg
- 3 x amps (SVT-VR, V-4B, HERITAGE B-15N)
- 3 x matched cabinets (SVT-810AV, SVT-212AV, B-15N 115)
- Accurate emulations of the original Ampeg amps and cabinets using the company's Dynamic Interaction Modeling technology
- Perfect companion for MODO BASS electric bass virtual instrument plug-in (available separately)
- Runs from within any version of AmpliTube 4.3 or later (free or paid version)
- Expandable via the AmpliTube Custom Shop
Ampeg Amplifier Heads - SVT-VR
-
- Arena-ready bass powerhouse with six 6550 output tubes gives you all the growl you might ever need
- Used by bass players such as Bootsy Collins, Tony Levin, Chris Squire, Pino Palladino, and Bill Laswell, to name a few
- The SVT-VR is a vintage reissue of an early 1970’s Blue-Line SVT head
- The preamp stage, power section, and rocker switches emulate the exact signal path, tone, and vibe of the original rock ’n’ roll workhorse
- V-4B
-
- An all-tube legend
- 100W All-Tube Bass Head is a reissue of the legendary 1971 original
- Delivers the pure tube vintage sound, attitude, and unmistakable grind that earned this classic amp a place in bass history
- HERITAGE B-15N
-
- One of the most recorded bass tones
- Two distinct, switchable 1964 and 1966 channels
- Flexible Baxandall-type bass and treble EQ controls along with selectable cathode bias (1964) or fixed bias (1966) modes
Ampeg Cabinets - SVT-810 AV
-
- "The Fridge", classic Ampeg stack that you see on stages worldwide
- Powerful, tight, and focused bass sound
- Infinite Baffle design has stayed the same since 1969 and delivers that punchy, round sound that defines the iconic Ampeg tone
- SVT-212-AV
-
- Pure Ampeg tone in a ported cabinet design
- Combines the fast transient response that cuts through mixes with the rich low end you aim for
- 2 x 12" custom Eminence LF drivers and a 1" compression driver
- 3-way level control in a rugged cab with classic vintage Ampeg styling
- B-15N 115
-
- The perfect companion of the HERITAGE B-15N
- 15" 300W Eminence speaker that delivers pure, full-bodied, and vintage-sounding tone, reminiscent of the good old 60s
- Suits most musical genres both in the studio and on stage
In the Box Bundle Items Ampeg SVX - Bass Amplifier and Cabinet Emulation Software (Plug-In, Download) awctuazebzrteyruerurdsxzstzquvbasdf Ampeg SVX 2 - Collection of Bass Amplifier and Cabinet Emulations for AmpliTube Plug-In (Download) Table of Contents
|
Upload User Manual
Have you got an user manual for the IK Multimedia Ampeg SVX 1 & 2 Bundle - Collections of Bass Amplifier and Cabinet Emulations for AmpliTube Plug-In in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Ampeg SVX - Bass Amplifier and Cabinet Emulation Software (Plug-In, Download)
| | | Mac | 2 GB of RAM (4 GB suggested)
Intel Core 2 Duo
Mac OS X 10.7 or later | | Windows | 2 GB of RAM (4 GB suggested)
Intel Core 2 Duo or AMD Athlon 64 X2
Windows 7, 8, or 10
ASIO-compatible sound card | | General Requirements | Internet connection for purchasing within Custom Shop
64-bit host sequencer or operating system | | Supported Formats | Standalone, AU, VST2, VST3, AAX | - Ampeg SVX 2 - Collection of Bass Amplifier and Cabinet Emulations for AmpliTube Plug-In (Download)
| | | Mac | Mac OS X 10.7 or later
Intel Core 2 Duo (minimum)
2 GB of RAM (4 GB suggested)
Supported Plug-in formats (64-bit): Audio Units, VST 2, VST 3, AAX | | Windows | Windows 7, Windows 8 or Windows 10
Intel Core 2 Duo or AMD Athlon 64 X2 (minimum)
2 GB of RAM (4 GB suggested)
Requires an ASIO-compatible sound card
Supported Plug-in formats (64-bit): VST 2, VST 3, AAX | | General Requirements | Internet connection for purchasing within Custom Shop
64-bit application—requires a 64-bit CPU and operating system |
Rating90% users recommend this product to others. And what about you?
This product has already been rated by 06 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
