User manual
ikan Carbon Fiber Mini-Jib and Tripod

User Manual for ikan Carbon Fiber Mini-Jib and Tripod Kit

• Product category: Cranes & Jibs ikan
• Brand: ikan
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for ikan Cranes & Jibs

Product description

• ikan Carbon Fiber Mini-Jib
  • Product Demo
  ikan's Carbon Fiber Mini-Jib weighs only seven pounds yet supports a payload of up to thirteen pounds. It is a 2 section jib, that can be extended to just over four feet from the fulcrum point. The jib mounts to tripods with a 75mm bowl fitting, or you can remove the jibs 75mm half ball and mount the jib on a 3/8"-16 mounting system, allowing you to use this on flat plate tripods or other surfaces.
  
  You can mount your camera directly to the camera platform of the jib, or use the included 75 mm bowl adapter to mount a ball head onto the jib arm. The two integrated bubble levels allow you to precisely control and adjust the level of the Jib Arm. The jib includes a threaded counterweight bolt that you thread into the back of the jibs extendable counterweight tail arm. This bolt allows you to mount the included gym style weight as well as optional weights and then extend the tail to counterbalance your camera.An included weight bag, allows you to quickly add more weight to your rig, without having to unscrew the weight safety, add weight, and then secure the weights again. The jib and its included accessories fit in the included carry sack for easy storage and transport.
  • The jib supports cameras weighing up to 13 pounds, and features independent pan and tilt locks. It extends from 21.5 to 50" from the fulcrum point. When mounting the jib to tripod, not included, please take incto account the weight of the jib arm, camera, accessories, and any counterbalance weights.
  • The jib mounts onto tripods with either a 65 or 75mm bowl fitting. The jibs half ball integrates a flat base allowing you to mount the jib on a flat surface. You can remove the threaded tripod tie-down rod and mount the jib directly to compatible tripod heads with a 3/8"-16 tie-down.
  • The included threaded weight rod threads into the counterbalance tail shaft of the jib. This allows you to locally source optional gym style weights to counterbalance your jib.
  • Using the included weight bag with carabiner and washer allows you to mount the weight bag on the threaded weight rod, and then add and remove weight to counterbalance you set up without having to remove the counterweight retaining nut.
  • The camera platform accepts an included QR plate, so you can quickly mount your camera or optional flat base fluid head to the camera platform. If you wish to mount an optional fluid head with 75mm half ball to the jib arm, the included QR 75mm half ball adapter can be used in place of the regular QR plate.
  • Two integrated levels allow you to level your jib.
  UPC: 847983012381
• E-Image 2-Stage Carbon Fiber Tripod with 75mm Bowl
  • Product Demo
  This 2-Stage Carbon Fiber Tripod from E-Image supports loads up to 88 lb. It is made of lightweight carbon fiber and has a 75mm bowl. The legs feature a twin-tube design with two stages. The tripod can be adjusted between a maximum height of 62" and minimum height of 25". It folds to 28". A Mono-Lock feature allows for quick height adjustments of both stages with one twist. An adjustable mid-level spreader provides extra security and stability. UPC: 847983010288
• E-Image GH03 Fluid Head with 75mm Ball
  • Product Demo
  The E-Image GH03 Fluid Head with 75mm Ball supports cameras and accessories weighing up to 11 pounds. The GH03 head features an Easy Lock Baseplate system that combines the balance adjustment of a sliding baseplate with the ease of a quick release system. It provides a fixed counterbalance settings that helps the fluid head support loads up to 11 pounds and won't force you to fight the head when working with lightweight camera systems.
  
  The variable tilt drag allows you to adjust the fluid head to suit your shooting style or the needs of the shot. The head features a built in 1/4"-20 accessory socket for available monitor support arms or other accessory items and independent pan and tilt locks. The head incorporates a bubble level, panhandle rosettes on the left and right side of the head (only one panhandle is included), and a 1/4"-20 threaded accessory socket for use with optional accessories.
  • The Easy Lock baseplate provides the balance adjustment range associated with a sliding balance plate but combines the ease of a quick release, as you can pop the camera (on the Easy Lock plate) into the top of the fluid head without having to support the camera while lining up the plate with the head. Easy to pop in, it stays secure until you release it, and you maintain the sliding balance adjustments.
  • The Easy Lock camera plate features a guided sled with a retractable locating pin and supports both 1/4"-20 and 3/8"-16 camera tie-down screws (included).
  UPC: 847983010424

• Carbon Fiber Mini-Jib tftcsueeuyscurcscyvtxausraudez
• Jib Level Knob
• Quick release Camera Plate
• 75mm Half Bowl Quick Release Adapter
• Counterweight Bag
• Carabiner & Washer for Weight Bag
• 5.5 Pound Counterweight
• Tail Threaded Counterweight Bolt
• Counterweight Retainer Nut
• Jib Base Mounting Bolt
• Transport Bag
• Limited 1-Year Warranty

• E-Image - 2-Stage Carbon Fiber Tripod with 75mm Bowl

• E-Image - GH03 Fluid Head with 75mm Ball

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• ikan Carbon Fiber Mini-Jib

  Construction	Carbon fiber
  Payload Capacity	13 lb / 5.9 kg
  Counterbalance System	User Supplied Weights
  Extension Range	Min: 21.5" / 54.6 cm Max: 50" / 127 cm
  Tilt Lock	Yes
  Pan Lock	Yes
  Pan Range	360°
  Tripod Attachment	75mm Ball or 3/8"-16 Threaded
  Camera Attachment	QR Plate
  Head Attachment	75mm Ball
  Head Arm Leveling	Collar locks
  Leveling Indicators	2 x Integrated bubble levels
  Weight	7 lb / 3.2 kg

  Box Dimensions (LxWxH)	39.0 x 10.0 x 6.0"

• E-Image 2-Stage Carbon Fiber Tripod with 75mm Bowl

  Head Mount Type	75 mm Bowl
  Load Capacity	88 lb / 40 kg
  Maximum Working Height	62" / 167 cm
  Minimum Working Height	25" / 64 cm
  Folded Length	28" / 71 cm
  Materials	Carbon Fiber
  Weight	7 lb / 3.2 kg

  Leg Sections	3
  Feet Features	Rubber, Spiked
  Spreader	Mid-Level (Included)

  Box Dimensions (LxWxH)	31.0 x 8.0 x 8.0"

• E-Image GH03 Fluid Head with 75mm Ball

  Camera Plate Features	Sliding Balance Plate
  Camera Plate Type	Easy Lock

  Base Mount	75 mm Half Ball

  Drag Control	Pan: Fixed
  Vertical Tilt	+90 Rating 70% users recommend this product to others. And what about you? This product has already been rated by 41 owners. Add your rating and experience with the product. Discussion Ask our technicians if you have a problem with your settings, or if anything is unclear in the user manual you have downloaded. You can make use of our moderated discussion. The discussion is public and helps other users of our website who may be encountering similar problems. The discussion is empty - enter the first post Post a new topic / query / comment: Items marked with * are required. Your name *: E-mail : Subject *: Message *: Your email address will not be displayed. Do not forget to fill it in if you want to receive a reply to your enquiry/contribution. Processing of personal data in accordance with GDPR