User manual
ikan MS-PRO Beholder 3-Axis Gimbal and

User Manual for ikan MS-PRO Beholder 3-Axis Gimbal and 5-Section Monopod Extension Kit

• Product category: Gimbal Stabilizers ikan
• Brand: ikan
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for ikan Gimbal Stabilizers

Product description

• MS-PRO Beholder 3-Axis Gimbal Stabilizer for Mirrorless Cameras The MS-PRO Beholder 3-Axis Gimbal Stabilizer for Mirrorless Cameras from ikan supports cameras weighing up to 1.9 pounds. Designed for professionals, it is suitable for use with small cameras with a 1/4"-20 mounting screw hole, GoPro cameras (requires optional mount not included), and select smartphones (requires optional mount not included). The camera platform incorporates three locking levers that allow you to adjust and balance your camera on the gimbal without requiring tools.
  
  A 32-bit controller with a 12-bit encoder help create smooth, accurate, and efficient stabilization for fast response and extended battery life. Three follow modes—pan-only, pan-and-tilt, and 3-axis (pan, tilt, and roll)—allow you to control which axes to stabilize and which to allow follow movement on. A built-in lock mode will hold the camera locked onto one point; and in any of the gimbal's modes, you can reposition the camera manually by holding it in place and having it hold that position. The built-in joystick allows you to override the follow mode and reframe the shot electronically, for smooth framing adjustment. You can also invert the gimbal for low-angle underslung shots. A built-in 3/8"-16 threaded mounting hole allows you to mount the gimbal on a tripod. The unit is powered by three 18650 rechargeable batteries.
  • Designed for mirrorless cameras
  • 360° rotating brushless motor
  • Lock mode: Yaw, pitch, and roll axes work together to keep the camera pointed in one direction
  • Pan-follow mode: Follow pan axis and hold the tilt position
  • Follow mode: Both tilt and pan axes
  • Three-axis follow mode: No restrictions as it allows the camera to follow pan, tilt, and roll
  • Easily switch to inverted mode at any time by simply flipping the handle over the camera
  • The built-in joystick, operated by your thumb or finger, allows you to make smooth framing adjustments within the shot
  • Inverted mode operated in conjunction with any of the Lock and Follow modes
  • Display screen on the back of the handle conveniently shows information on the battery life and operating mode
  • Two 1/4"-20 threaded mounting holes on the handle, suitable for mounting accessories
  • Batteries rest inside a caddy which is inserted into the handle. They are charged within the caddy by using a 2.5A/12.5W USB charger (not included). Charging with this method will only charge the batteries to 80% capacity, and ikan recommends using a dedicate charger such as the ikan ICH-SC4
  • USB port on the handle for firmware updates (cannot be used to charge the batteries or power accessories)
  UPC: 847983020959
• MPA70 Monopod This ikan MPA70 Monopod supports up to 35.0 lb and measures 18.8" when folded. It is constructed from aluminum alloy, consists of five sections that utilize twist locks for rapid deployment, and can be positioned to a maximum height of 70.8". A foam cover along the top section provides a secure and comfortable grip while moving the monopod, and a rubber foot helps to enhance stability on a wide variety of surfaces.
  
  Cameras, lenses, sport optics, or accessories with 1/4"-20 or 3/8"-16 female accessory threads can be directly connected to the reversible mount on this monopod's 2.3" top platform. A carry bag with strap is included for storage and transport.
  Use and Handling
  • • Supports up to 35.0 lb
    • Can be set to a maximum height of 70.8"
    • Features 5 sections, twist locks for rapid deployment
    • Rubber foot helps to enhance stability on a wide variety of surfaces
    • Weighs 1.6 lb, measures 18.8" when folded
  Construction Details
  • • Durable and lightweight aluminum-alloy construction
    • 1/4"-20 or 3/8"-16 reversible mount
    • Hex key to remove or install reversible mount
    • Includes nylon carry bag for storage and transport
  UPC: 847983022113

3 x
• 18650 Lithium-Ion Battery (3.7V, 2600mAh)

• Micro-USB AC Adapter

• Battery Holder

• Quick Release Plate

• 1/4"-20 Tie-Down Screw

• Soft-Sided Travel Case

• Limited 1-Year Warranty

• Carry Bag

• Hex Key for Reversible Mount

• Limited 1-Year Warranty

Upload User Manual

Please enter here the link to the user manual of this product: User manual for ikan MS-PRO Beholder 3-Axis Gimbal and 5-Section Monopod Extension Kit can be downloaded below, so the upload option is not active. OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0% User manual for ikan MS-PRO Beholder 3-Axis Gimbal and 5-Section Monopod Extension Kit can be downloaded below, so the upload option is not active.

Download User Manual

Download PDF User Manual - ikan MS-PRO Beholder 3-Axis Gimbal and 5-Section Monopod Extension Kit (PDF file, 1.19 MB)

Technical parameters

• MS-PRO Beholder 3-Axis Gimbal Stabilizer for Mirrorless Cameras

  Number of Axes	3-Axis
  Rotation Range	Yaw (Pan): 360 Rating 80% users recommend this product to others. And what about you? This product has already been rated by 07 owners. Add your rating and experience with the product. Discussion Ask our technicians if you have a problem with your settings, or if anything is unclear in the user manual you have downloaded. You can make use of our moderated discussion. The discussion is public and helps other users of our website who may be encountering similar problems. The discussion is empty - enter the first post Post a new topic / query / comment: Items marked with * are required. Your name *: E-mail : Subject *: Message *: Your email address will not be displayed. Do not forget to fill it in if you want to receive a reply to your enquiry/contribution. Processing of personal data in accordance with GDPR