|
User Manual for ILIO Patch Library Bundle for Spectrasonics Omnisphere 2 Virtual Synthesizer Click to enlarge the picture
Contents of the user manual for the ILIO Patch Library Bundle for Spectrasonics
- Product category: Virtual Instruments ILIO
- Brand: ILIO
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for ILIO Virtual Instruments
|
User manual for the ILIO Patch Library Bundle for Spectrasonics contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any ILIO product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official ILIO user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a ILIO product will considerably shorten its lifespan!
|
Product description The ILIO Patch Library Bundle for Spectrasonics Omnisphere 2 Virtual Synthesizer offers six patch libraries designed to extend Omnisphere 2's sound pallet with original sound sources and signature patches designed by professional music producers. The bundle includes the Hardwired, Robotica, Revolve, Pulsar, Fire Water, and Ascension patch libraries. Inside is a cornucopia of modular synth sonics, kinetic arpeggiations, BPM-locked movers, risers and swells, ominous drones, atmospheric pads, ripping synth basses, powerful and funky leads, lush pads, and spaced-out sound effects, ideal for any type of modern electronic music, from Drum and Bass, to EDM, to film soundtracks. - Hardwired Patch Library for Omnisphere 2 (Download) Designed for EDM producers and DJ's, as well as film and television composers, ILIO Hardwired is a patch library for Omnisphere 2.1 (or higher) that consists of analog and digital modular patches created using cutting-edge modular synth technology.Jesse Scott of Summer Channel and Kris Northern of Magpie Modular programmed over one hundred patches with foreboding cinematic drones, lush and perpetually evolving sounds, textural sound beds, quirky effects, gnashing leads, mangled aural soundscapes, crazy one-shot hits, as well as BPM-locked rhythmic effects and arpeggiations. Most patches were generated using multiple, random timing sources so that you never get the same exact sound twice, ensuring that you get unique sounds every time you use your instrument. Note: Requires Omnisphere version 2.1 or later
- Key Features
-
- Analog and digital modular patches created using cutting-edge modular synth technology
- Programmed by producer Jesse Scott of Summer Channel and modular synths designer Kris Northern (Magpie Modular)
- 370 MB library, recorded at 48 kHz / 24-bit
- Programmed using multiple random timing sources to introduce variations in sounds
- Each sound is optimized for use with your modulation wheel
- Loads quickly and easily into Omnisphere 2.1 or later
- 100+ Patches
-
- 27 x textural/sound beds
- 20 x sound effects
- 12 x cinematic drones
- 14 x BPM-locked movers/arpeggiations
- 10 x hits
- 2 x vox-based sounds
- 5 x pads
- 5 x basses
- 6 x leads
- 2 x synths
- Robotica - Patch Library For Omnisphere 2 (Download) Robotica from ILIO is a 107-patch library for Spectrasonics Omnisphere 2 that provides musicians, producers, and sound designers with Sci-Fi sonic elements designed to infuse futuristic atmospheres into any type of electronic music. Robotic effects and textures, vocoder sound bites, ominous drones, atmospheric pads, spaced-out sound effects, and BPM-locked movers can be blended in new and unusual ways using the host's extensive menu of arpeggiators, LFOs, envelopes, and effects. The library loads quickly and easily into Omnisphere. Each sound is optimized for use with a modulation wheel, providing real-time control on stage or in the studio. Note: Requires Spectrasonics Omnisphere v2.1 (free update for Omnisphere 2 owners).
- Patches
-
- 107 x meticulously crafted patches
- 22 x BPM-Locked leads, synths, arpeggios, and SFX
- 9 x drones
- 23 x SFX
- 15 x hits and bits, including vocal shots, impacts, arpeggios, and SFX
- 2 x Noisescapes
- 1 x synth bass (created with a vacuum tube)
- 16 x mono synths
- 4 x plucks
- 5 x polyphonic synths
- 7 x textures
- 3 x transition Effects
- Distinctive robotic effects and textures
- Vocoder sound bites
- Derived from popular modern analog synths, vocoders, guitars, time-stretched vocals, sound FX, and boutique digital sources
- Recorded at 48 kHz/24-bit (with some at 96 kHz/24-bit), and processed for maximum sound quality
- Revolve Arpeggios Patch Library for Omnisphere 2 (Download) Designed to add groove and movement to your soundtracks, chill mixes, pop productions, or dance tracks, ILIO Revolve is a patch library for Omnisphere 2.1 (or later) that consists of arpeggiated synths, heavenly bells, twisted bass lines, and phantasmagorical plucks.Producers Jesse Scott and MIDIhead programmed over one hundred arpeggiated patches and ten multis including super-resonant, detuned synths, intense and suspenseful movements, growling pulsations, and plucked and airy sounds, to provide you with plenty of inspiration for any mood you wish to create.
- Key Features
-
- Arpeggios patch library for Omnisphere 2.1 or later
- Programmed by producer Jesse Scott of Summer Channel and producer MIDIhead
- Over 100 arpeggiated patches
- 10 multis for sound layering
- Arpeggiated synths
- Heavenly bells
- Twisted bass lines
- Phantasmagorical plucks
- Includes Darkness and Light, a collection of 25 patches for users who have installed the full version of Keyscape—with ethereal pianos, searing keys, and emotive dreamscapes
- Pulsar - Patches for Omnisphere 2 (Download) Pulsar from ILIO is a set of additional patches for Spectrasonics's Omnisphere 2 virtual instrument, featuring BPM-locked basses, synths, leads, pads, and FX. With the sounds ranging from aggressive to ethereal, the collection makes use of the host's extensive menu of arpeggiators, LFOs, envelopes, and effects, and provides rhythmic energy for use in electronic, ambient, pop, EDM, and film music.
Nearly all of the sounds are generated using Omnisphere 2's DSP waveforms, with focus on the use of the modulation wheel and aftertouch for fast, expressive, sound-altering control. Many patches are also optimized for use with The Orb, providing even more real-time control on stage, or in the studio. - Patches
-
- 32 x BPM Basses
- 53 x BPM Synths
- 7 x BPM Pads
- 4 x BPM Bells
- 4 x BPM FX
- 2 x BPM Leads
- 2 x BPM Vox
- 1 x BPM Organ
- Fire Water - Patches for Omnisphere 2.1 (Download) Fire Water from ILIO is a patch library for Omnisphere 2.1 with categories that include synthesizer basses, funky leads, lush pads, ethereal and epic poly synths, effects and textures, vocoder sound bites, and BPM-locked sequences. The sounds are suitable for constructing any type of modern electronic music, such as drum and bass, trap, hip-hop, pop, EDM and even film scores. The library loads quickly and easily into Omnisphere 2.1 or higher. Each sound is optimized for use with a modulation wheel for real-time control on stage or in the studio, and the use of The Orb yields unexpected surprises.
- Patches
- 30 BPM Synths, Bass, Leads, FX, and Vocoder Phrases
3 Bells 1 Tuned, Sub Kick 2 Vocoder Phrases 1 Organ 7 Pads 2 SFX 23 Synth Bass 18 Lead Synthesizers 3 Synth Plucks 17 Polyphonic Synthesizers - Ascension - Patches for Omnisphere (Download) Ascension from ILIO is a collection of over two hundred riser and swell patches for Spectrasonics' Omnisphere virtual instrument. Designed for EDM (Electronic Dance Music) producers and DJ's, as well as film and television composers, the patches make use of the modulation wheel to add a side-chain compression simulator that emulates the "four on the floor" pumping effect. Many patches are also optimized for use with The Orb performance interface feature, providing even more real-time control on stage and in the studio.
Control is also available for adjusting the timing of each riser and swell, all of which are presented in 2, 4, 8, and 16 bar iterations (with several single bar versions added). This allows each riser to finish its crescendo at the right ending point, no matter the tempo. Additionally, each sound holds and transforms intro drones or pulsations after the crescendo, allowing for the addition of beats and other elements on the downbeat, if desired. Note: Requires Omnisphere version 1.5 or higher -
- 183 tempo-locked risers represented in up to four different bar lengths
- 21 tempo-locked swells represented in up to three different bar lengths
In the Box Bundle Items Hardwired Patch Library for Omnisphere 2 (Download) uafvrxeyfbyzcbcsbwztxvfyt Robotica - Patch Library For Omnisphere 2 (Download) Revolve Arpeggios Patch Library for Omnisphere 2 (Download) Pulsar - Patches for Omnisphere 2 (Download) Fire Water - Patches for Omnisphere 2.1 (Download) Ascension - Patches for Omnisphere (Download) Table of Contents
|
Upload User Manual
Have you got an user manual for the ILIO Patch Library Bundle for Spectrasonics Omnisphere 2 Virtual Synthesizer in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Hardwired Patch Library for Omnisphere 2 (Download)
System Requirements | Omnisphere version 2.1 or later 2.4 GHz or higher processor 4 GB RAM minimum, 8 GB or more recommended Dual-layer compatible DVD-ROM drive 64 GB of free hard-drive space AU, VST 2.4 or later, RTAS / AAX-capable host software Native 64-bit and 32-bit Mac OSX 10.8 or later, AU plug-ins require host with support for Cocoa-based plug-ins Windows 7 or later | Library | 370 MB Recorded at 48 kHz / 24-bit | - Robotica - Patch Library For Omnisphere 2 (Download)
System Requirements | Mac 2.4 GHz or higher processor OS X 10.8 Mountain Lion or higher 4 GB RAM minimum (8 GB or more recommended) Host software that supports Audio Units, RTAS/AAX, VST 2.4 or higher plug-in formats Audio Unit plug-in requires host with support for "Cocoa" based plug-ins Native 64- and 32-bit 64 GB of free hard drive space Omnisphere version 2.1 required (free update for Omnisphere 2 owners) Windows 2.4 GHz or higher processor Windows 7 and higher (32- and 64-bit) 4 GB RAM minimum (8 GB or more recommended) Host software that supports AAX, RTAS, VST 2.4 or higher plug-in formats Native 64- and 32-bit 64 GB of free hard drive space Omnisphere version 2.1 required (free update for Omnisphere 2 owners) | Library Specifications | 400 MB 48 kHz / 24-bit samples | - Revolve Arpeggios Patch Library for Omnisphere 2 (Download)
System Requirements | Omnisphere version 2.1 or later 2.4 GHz or later processor 4 GB RAM minimum, 8 GB or more recommended Dual-layer compatible DVD-ROM drive 64 GB of free hard-drive space VST 2.4 or higher, RTAS / AAX-capable host software Native 64-bit and 32-bit Mac OS X 10.8 or later, AU plug-ins require host with support for Cocoa-based plug-insWindows 7 or later | Library | 370 MB Recorded at 48 kHz / 24-bit | - Pulsar - Patches for Omnisphere 2 (Download)
System Requirements | Mac 2.4 GHz or higher processor OS X 10.8 Mountain Lion or higher (32- and 64-bit) 4 GB RAM minimum (8 GB or more recommended) Host software that supports AAX Native, Audio Units, RTAS, VST 2.4 or higher plug-in formats Audio Unit plug-in requires host with support for "Cocoa" based plug-ins Omnisphere version 2.1 required (free update for Omnisphere 2 owners) Windows 2.4 GHz or higher processor Windows 7 and higher (32- and 64-bit) 4 GB RAM minimum (8 GB or more recommended) Host software that supports AAX Native, RTAS, VST 2.4 or higher plug-in formats Omnisphere version 2.1 required (free update for Omnisphere 2 owners) | - Fire Water - Patches for Omnisphere 2.1 (Download)
System Requirements | Full installation of Spectrasonics' Omnisphere 2.1 or higher. Users of Omnisphere 2 need to update to at least version 2.1 | - Ascension - Patches for Omnisphere (Download)
System Requirements | Omnisphere version 1.5 and higher is required in order to use these patches |
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 67 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Go Pro FETCH Dog Harness ADOGM-001... Trijacon ACOG USMC scope... Pyle Pro BTA 62BT 6-Zone Stereo Receiver Bluetooth... LG Gram 17 Laptop... LG 300W 2.1 ch surround sound manual. It has the soundbar, subwoofer, wireless receiver for connected rear speakers and wireless controller. ...
|
Discussion |
Latest contributions to the discussion:
lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland
... lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland... Settings access and setup Name: Edwin Derks Nuance PaperPort 14 I had a problem with Paperport loading. Through the remote efforts of a Tech was able to get back online, however, "settings" are only listed 1 - 5 with no action listed as was 'visibly' available, (i.e. Scan both sides, Black and White, Color, etc.)
1. how to change, 2. wha... query Name: Vudayagiri Balasubramanyam Bose Wave SoundTouch Music System IV how to set up my bose radio with my remote working-class ... Hi. I didn’t even get a chance to try it once! :( plz help Name: Eric Tasakovic Keeley Dark Side Pedal I ordered a dark side pedal second hand online for 20 bucks cheaper than it would have been to buy it new….20 measly bucks. Anyway…it didn’t come with a power supply. I messed up and accidentally plugged in a 9v ac output power supply in, instead of the required 9v dc. I’...
|
|