User Manual for Impact Venture TTL-600 Battery-Powered Monolight Kit with Nikon Controller Click to enlarge the picture
Contents of the user manual for the Impact Venture TTL-600 Battery-Powered Monolight Kit
- Product category: Monolights Impact
- Brand: Impact
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Impact Monolights
|
User manual for the Impact Venture TTL-600 Battery-Powered Monolight Kit contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Impact product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Impact user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Impact product will considerably shorten its lifespan!
|
Product description Overpowering the Sun with the Impact Venture Read More Take advantage of this Venture TTL-600 Battery-Powered Monolight with Nikon Controller from Impact sold here as a Kit. This kit includes the Venture TTL-600 Battery-Powered Monolight, a Venture Wireless Controller for Nikon cameras, an extra spare Lithium-Ion Battery for the Venture TTL-600 monolight, and a Venture 32" Hex Softbox. - Impact Venture TTL-600 Battery-Powered Monolight
- Introducing the Venture TTL-600 Monolight from Impact
- A Meaningful Relationship
For a fast, lightweight, and compact light, look no further than the Venture TTL-600 Battery-Powered Monolight from Impact. The Venture TTL-600 offers full support for Sony, Canon, and Nikon, allowing you to go fully mobile with your studio. Busy photographers can set up their monolight on a stand or hand it to an assistant, put the optional TTL transmitter onto their camera's hot shoe, and start shooting. The Venture TTL-600 operates in two modes. The Quick Mode reduces your light's power to produce a short flash duration range of 1/455 - 1/19,500 seconds for a faster recycle rate of 1.2 seconds. The Power Mode allows you to increase the power output to produce a flash duration range of 1/380 - 1/18,500 seconds with a 3-second recycle rate. With a maximum of 600W/s output, this monolight provides an 8-stop power range control, which gives you a range of choices to achieve the exact shot you had in mind. The proportional and independent modeling-light modes can both be set to Constant to be on continuously, or to Recycle Signal that turns off when the flash is triggered and turns back on when recycled. The adjustable 15W LED lamp allows you to adjust the lamp's brightness independently from the flash or proportional to the flash's output. Weighing in at just over four pounds and measuring less than 9" in length, this monolight could be tucked into most backpacks if necessary. The Venture TTL-600 comes with a reflector, removable pistol grip, stand mount, battery, charger, PC cord, and an aluminum case with a nylon strap for added portability. - Battery-Powered 600Ws
- Designed for location shoots where a powerful strobe is needed
- Two Flash Modes
- Quick Mode and Power Mode
- Digital Color-Correction Circut
- Digital Color-Correction Circuit to stabilize the color temperature in either Quick Mode or Power Mode, providing consistency with a variance of 50K
- Wireless TTL with Integrated 2.4GHz Wireless Control
- Integrated 2.4 GHz receivers for TTL and High Speed Sync with Canon, Nikon, and Sony cameras, operates up to 328' away with available Venture transmitters VE-WCC (Canon), VE-WCN (Nikon), VE-WCSMI (Sony), VE-WCSO (Sony AutoLock)
- High Speed Sync
- HSS not requiring a special settingFor freezing motion or the use of a larger aperture in bright light Shutter speeds as fast as 1/8000 second, camera permitting
- Flash Durations
- Flash durations up to 1/19,500 of a second to freeze action
- LED Modeling Lamp
- 15W modeling lamp featuring two modes: independent and proportional, each with Constant and Recycle Signal option
UPC: 847628594951 - Impact Venture Wireless Controller with Nikon Shoe
- Introducing the Venture TTL-600 Monolight from Impact
- A Meaningful Relationship
Impact's Venture Wireless Controller with Nikon Shoe is the key to wireless triggering and TTL remote control of its Venture TTL-600 Battery-Powered Monolight. Operating on the 2.4 GHz bandwidth, the controller has 9 frequency channels, 3 groups per channel, and a range of up to 328' for TTL triggering. The controller allows for high speed sync and second curtain sync. You can also control each monolight's light intensity from full to 1/128 power as well as setting the modeling light brightness from 10% to 100%. The controller runs on 2 AAA batteries and features a Mini-USB connector that allows for firmware updates directly from Impact's website. - Benefits
-
- Specifically designed for the Venture TTL 600 Monolight
- Provides TTL and HSS functionality
- Independent control of individual groups and channels
- TTL and manual modes can be used at the same time
- Compatible with Nikon flash shoes
- 2.4 GHz transmitter
- PC Sync port for wired connection to the camera
UPC: 847628594968 - Impact Venture Hex Softbox (32")
- Introducing the Venture TTL-600 Monolight from Impact
- A Meaningful Relationship
For wrapping light around your subject, take advantage of this 32" Venture Hex Softbox from Impact when using your Venture TTL-600 Monolight on location or in your studio. This Hex Softbox provides soft, flattering lighting and is easy to assemble and mount to the monolight thanks to the built-in mount and rods that quickly snap into place. UPC: 847628595071 - Impact Lithium-Ion Battery for Venture TTL 600
- Introducing the Venture TTL-600 Monolight from Impact
- A Meaningful Relationship
This Lithium-Ion Battery for Venture TTL 600 from Impact will give you 500 full-power flashes on a 3.5-hour charge from the Impact Venture multi-voltage charger. UPC: 847628595002 In the Box - Venture TTL-600 Battery-Powered Monolight wbuurfwzabxfcqvwwdvxwdcydcwvavd
- Lithium-Ion Battery for Venture TTL 600
- Venture Quick Charger for TTL-600
- Reflector
- Pistol Grip
- Stand Mount
- PC Cord
- Aluminum Case
- Nylon Case Strap
- Limited 1-Year Warranty
- Venture Wireless Controller with Nikon Shoe
- Venture Hex Softbox (32")
- Lithium-Ion Battery for Venture TTL 600
Size Matters: TTL Battery-Powered Impact Venture Monolight Shawn C. Steiner 09/20/2016 Table of Contents
|
Upload User Manual
Have you got an user manual for the Impact Venture TTL-600 Battery-Powered Monolight Kit with Nikon Controller in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Impact Venture TTL-600 Battery-Powered Monolight
| Maximum Power | 600 Ws | Power Control | 8 Stops | Flash Duration | 1/19,500 to 1/380 Sec | Recycle Time | 1.2 Sec (Full Power) | Color Temperature | 5500 to 5600K | Flash Ready Indicator | Audio, Visual | Accessory Fitting Type | Comet | | Type | LED | Control Modes | Constant, Independent, Proportional | | Sync Type | Radio | Wireless Channels / Groups | 9 / 3 | Wireless Range | 328' / 100 m (Radio) | | Battery Chemistry | Lithium-Ion | Maximum Output Voltage | 14.8 VDC | Flashes Per Charge | 500 Flashes (Full Power) | Recharge Time | 3.5 Hours | | Display | None | Dimensions |
Rating90% users recommend this product to others. And what about you?
This product has already been rated by 81 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Honeywell Home Doorbell 916.8 MHz Product Ref: 3231665-002 Rev B... Go Pro FETCH Dog Harness ADOGM-001... Trijacon ACOG USMC scope... Pyle Pro BTA 62BT 6-Zone Stereo Receiver Bluetooth... LG Gram 17 Laptop...
|
Discussion |
Latest contributions to the discussion:
lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland
... lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland... Settings access and setup Name: Edwin Derks Nuance PaperPort 14 I had a problem with Paperport loading. Through the remote efforts of a Tech was able to get back online, however, "settings" are only listed 1 - 5 with no action listed as was 'visibly' available, (i.e. Scan both sides, Black and White, Color, etc.)
1. how to change, 2. wha... query Name: Vudayagiri Balasubramanyam Bose Wave SoundTouch Music System IV how to set up my bose radio with my remote working-class ... Hi. I didn’t even get a chance to try it once! :( plz help Name: Eric Tasakovic Keeley Dark Side Pedal I ordered a dark side pedal second hand online for 20 bucks cheaper than it would have been to buy it new….20 measly bucks. Anyway…it didn’t come with a power supply. I messed up and accidentally plugged in a 9v ac output power supply in, instead of the required 9v dc. I’...
|
|