|
User Manual for IndiPRO Tools Power Grid for Blackmagic Production Camera 4K Click to enlarge the picture
Contents of the user manual for the IndiPRO Tools Power Grid for Blackmagic
- Product category: Battery Mounting Plates IndiPRO Tools
- Brand: IndiPRO Tools
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for IndiPRO Tools Battery Mounting Plates
 |
User manual for the IndiPRO Tools Power Grid for Blackmagic contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any IndiPRO Tools product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official IndiPRO Tools user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a IndiPRO Tools product will considerably shorten its lifespan!
|
Product description The IndiPRO Tools Power Grid for Blackmagic Production Camera 4K, featuring two Canon LP-E6 battery bays, is a single-clamp rod mount power solution. It supports one Canon LP-E6 battery on each side and draws power from both simultaneously, allowing a substantial increase in the camera's run-time. The supported DV batteries come in different sizes, some very lightweight, and the Power Grid itself weighs only 0.4 lb, so Power Grid can be set up as a lightweight solution. Batteries are sold separately. Power Grid connects to the camera via a right-angle DC connector on an 18" cable.
The Power Grid requires both batteries to be attached at all times, but it also provides continuous power to the camera's internal battery, keeping it at full capacity at all times, so you can swap the two Canon LP-E6 batteries for two other ones without the camera powering off. An LED indicator on the Power Grid lights up and remains lit as long as the two Canon LP-E6 batteries have sufficient power. - Key Features
-
- Single-clamp, 15mm rod-mount power solution
- Two Canon LP-E6 battery bays
- Provides continuous charge to camera's internal battery
- Right-angle DC output connector on an 18" cable
- LED status indicator
UPC: 859576003690 In the Box IndiPRO Tools Power Grid for Blackmagic Production Camera 4K (2x Canon LP-E6) 1-Year Limited Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the IndiPRO Tools Power Grid for Blackmagic Production Camera 4K in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersIndiPRO Tools PGRID4KLP Specs | Rod Clamp Type | Single-rod, 15 mm | | Battery Bays | 2 (supporting Canon LP-E6 batteries) | | Output | 1x right-angle DC connector on 18" (46 cm) cable | | Material | PVC enclosure; aluminum rod mount | | Weight | Approx. 0.4 lb (180 g) | | | | Package Weight | 0.55 lb | | Box Dimensions (LxWxH) | 6.7 x 5.5 x 3.4" |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 25 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
NEWER F100 CAMERA MONITOR...
PhotoStage progessional...
powerpint...
Night Detective Quest 5M 5x Night Vision Monocular ...
Ibanez AM93QM User Manual....
|
|
