User manual
IndiPRO Tools Power Grid System with

User Manual for IndiPRO Tools Power Grid System with 2x LP-E6 Batteries for Blackmagic Pocket Camera Kit

• Product category: On Camera Batteries IndiPRO Tools
• Brand: IndiPRO Tools
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for IndiPRO Tools On Camera Batteries

Product description

• IndiPRO Tools Power Grid System Dual Canon LP-E6 Type Batteries Battery Plate for Pocket Cinema Camera
  • Item Demo
  The Power Grid System Dual Canon LP-E6 Type Batteries Battery Plate for Pocket Cinema Camera from IndiPro Tools powers your Blackmagic Pocket Cinema Camera using two available Canon LP-E6 type batteries. The Plate incorporates a clamp so you can mount it to LWS 15mm support rods and it features a right angle power plug to keep the cable neat and snug on the camera.
  
  The plate itself features a two-sided design that mounts the batteries one on each face, two batteries are required to supply the necessary voltage to power the camera. The batteries securely snap in to the plate, and you must press a small tab to remove them. A green LED built into the plate lights up to indicate sufficient voltage to power for the camera. When used in conjunction with the camera's internal battery, you can hot swap the batteries without powering down the camera. The Power Grid System is Made in the USA.
  • Powers your Blackmagic Pocket Camera using two available Canon LP-E6 type batteries.
  • Integrated rod clamp for LWS (light weight standard) 15mm support rods, allows you to mount the Power Grid System in a variety of positions.
  • Space saving battery plate that mounts available batteries face to face instead of side-by-side.
  • Batteries securely snap into place, and a release tab must be depressed to remove them, which means that the batteries remain attached during normal use.
  • A built-in green power LED provides confirmation that the Power grid system is supplying enough voltage to power the camera.
  UPC: 859576003416
• 2 x Watson LP-E6N Lithium-Ion Battery Pack (7.2V, 2000mAh)
  • Item Demo
  The Watson LP-E6N Lithium-Ion Battery Pack works with all cameras and camcorders that take the Canon LP-E6N or LP-E6. This replacement battery pack with a Japanese-made cell features a 2000mAh capacity, 7.2V of output power, and 14.4 watt-hours. Small and lightweight, lithium-ion batteries can be charged or discharged at any time without developing memory effect.
  Compatible Cameras
  • Canon EOS DSLRs:
    • 5D Mark II
    • 5D Mark III
    • 5D Mark IV
    • 5DS
    • 5DS R
    • 60D
    • 60Da
    • 70D
    • 80D
    • 6D
    • 6D Mark II
    • 7D
    • 7D Mark II
    • 7DSV
    
    Canon Camcorders:
    • XC15 4K UHD Camcorder
    • XC10 4K Professional Camcorder
  UPC: 847628598393

• Power Grid System Dual Canon LP-E6 Type Batteries Battery Plate for Pocket Cinema Camera ytvvzxrzrdabuzcetvwq
• Limited 1-Year Warranty

• 2 x Watson - LP-E6N Lithium-Ion Battery Pack (7.2V, 2000mAh) ytvvzxrzrdabuzcetvwq

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• IndiPRO Tools Power Grid System Dual Canon LP-E6 Type Batteries Battery Plate for Pocket Cinema Camera

  Battery Mounting	2 x Canon LP-E6 type
  Power Connector	1 x right angled for Blackmagic Pocket Cinema Camera
  Dimensions (H x L)	3.2 x 4" (8.1 x 10.1 cm)
  Weight	0.4 lb (181.4 g)

  Box Dimensions (LxWxH)	6.7 x 5.3 x 2.4"

• 2 x Watson LP-E6N Lithium-Ion Battery Pack (7.2V, 2000mAh)

  Chemistry	Lithium-ion
  Capacity	2000 mAh
  Output Voltage	7.2 V
  Watt-Hours	14.4Wh
  Operating Temperature	15 to 105°F / -10 to 40°C
  Storage Temperature	59°F / 15°C recommended

  Box Dimensions (LxWxH)	6.5 x 3.5 x 1.5"

Rating

Discussion