|
User Manual for JMR Electronics Mac Pro PCIe to Thunderbolt 2 RAID Enclosure with Rackmount Kit Click to enlarge the picture
Contents of the user manual for the JMR Electronics Mac Pro PCIe to
- Product category: Expansion Chassis JMR Electronics
- Brand: JMR Electronics
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for JMR Electronics Expansion Chassis
 |
User manual for the JMR Electronics Mac Pro PCIe to contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any JMR Electronics product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official JMR Electronics user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a JMR Electronics product will considerably shorten its lifespan!
|
Product description The Mac Pro PCIe to Thunderbolt 2-Bay RAID Enclosure with Rackmount Kit houses your Apple Mac Pro (late 2013) to provide it with four PCIe slots. To deliver these features, the enclosure comes with two independent Thunderbolt 2 bridge circuits that drive the four PCIe slots with 20 Gbps bandwidths. Your Mac Pro connects to these PCIe slots by utilizing two of the three available Thunderbolt connections. For powering all these features, a 460W power supply is on board.
Drive carriers are included to quickly mount your 2.5" hard drives and SSDs into the eight hot-swappable drive bays. Once drives are installed and configured in a RAID mode, the enclosure can deliver data at a rate of up to 1200 MB/s to the Mac Pro.
This JMR enclosure supports full-height, full-length PCIe cards, and each of the PCIe slots operates mechanically at x16 and electrically at x4. You can use the three remaining PCIe slots to add Fiber-channel adapters, 10GbE networking cards, video capture cards, audio interface cards, dedicated graphics cards, RED Rocket-X cards, and more for your Apple Mac Pro.
Once installed within the enclosure, the Mac Pro's on/off power button and I/O ports are controlled via a pass-through design. JMR has outfitted this enclosure with an I/O panel that can be mounted to the front or back of the case. This panel features two USB 3.0 ports, one HDMI port, one Gigabit Ethernet port, one mic port, and one headphone port. Aside from these ports, four 20 Gbps Thunderbolt 2 ports are available, so you may daisy-chain other Thunderbolt devices to your Apple Mac Pro. Additionally, the JMR enclosure sports a forced-air cooling solution that keeps your Mac, PCIe cards, and drives running smoothly. Dual Dedicated Thunderbolt 2 Circuits - The four PCIe slots are powered using two independent Thunderbolt 2 bridge circuits, each of which runs at 20 Gb/s. One Thunderbolt 2 bridge drives two of the PCIe slots, while the other Thunderbolt 2 bridge circuit powers the other two. When connecting to a Mac Pro, users will need to use two of the Lightning XQ's Thunderbolt 2 ports and two Thunderbolt 2 cables, each of which will connect two one of the Mac Pro's Thunderbolt 2 ports, with two total ports being used
- So that your bandwidth may be maximized, please ensure that each Thunderbolt 2 cable is connected to a separate Thunderbolt 2 bridge circuit on your Mac Pro. The 2013 Mac Pro comes equipped with six Thunderbolt 2 ports that are powered by three Thunderbolt 2 bridge circuits, or two ports per circuit. If multiple peripherals are connected to one circuit, then the bandwidth will be shared. Also, please bear in mind that each grouping of two PCIe slots on the Lightning XQ share one Thunderbolt 2 circuit. If only one card is installed on a dedicated circuit, it will receive the full 20 Gb/s bandwidth of that circuit, but if a second card is installed, the bandwidth will be shared, with each card receiving 10 Gb/s. Likewise, if only one card is installed on each dedicated circuit, they will both receive the full 20 Gb/s bandwidth of each circuit. Additionally, if only one Thunderbolt 2 cable is used to connect this system to your Mac Pro, then only two of the four PCIe slots will be available
Common Applications - 10GbE network adapter cards
- Graphical Processing Units (GPUs), RED Rocket-X cards
In the Box JMR Electronics Mac Pro PCIe to Thunderbolt 2 RAID Enclosure with Rackmount Kit Rackmount Kit Power Cord Limited 1-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the JMR Electronics Mac Pro PCIe to Thunderbolt 2 RAID Enclosure with Rackmount Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersJMR Electronics LTNG-XQ-RMMP Specs | Drive Bays | None | | PCIe Expansion Slots | 4 x PCIe expansion slots (x16 mechanical / x4 electrical, full-height and full-length) | | Ports | 4 x Thunderbolt 2 Ports (20 Gb/s)
2 x USB 3.0
1 x HDMI
1 x Gigabit Ethernet
1 x Microphone
1 x Headphone | | Data Transfer Rates | Up to 1,200 MB/s | | Cooling | Internal forced air cooling | | Power | 460 W internal power supply (90 to 264 VAC, 50 to 60 Hz) | | Form Factor | Rackmount | | Dimensions | 18.0 x 7.0 x 22.0" / 457.2 x 177.8 x 558.8 mm | | Weight | 28.0 lb / 12.7 kg (without PCIe cards or drives) |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 95 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Hp pro m102w...
Blackmagic Design ATEM Television Studio video switcher
This is NOT the ATEM Television Studio HD, nor the ATEM Television Studio M/E
It is the orig...
Seagate 8TB Skyhawk 3.5" SATA...
Tooline DP209B Drill Press...
Milano Carbon Fiber Tripod with B1 Head...
|
| Discussion |
Latest contributions to the discussion:
I need all,technical install info.Iwill down load and print all I can get fr :weaver.
Name: Earl Craig bodiford
Weaver 4-16x44 Kaspa Riflescope
This is one very ,very fine scope,! Thanks again to weaver for you’re attention to customers needs and diligence to quality!again, thank you Earl Craig Bodiford,. Ecbodiford @gmail.com...
Explainer Video for your website?
Name: Jo Riggs
Salamander Designs Keyboard Storage Shelf for
Hi,
I just visited search-manual.com and wondered if you've ever considered an impactful video to advertise your business? Our videos can generate impressive results on both your website and across social media.
Our prices start from just $195.
Let me know if you're inte...
Rear camera go blank
Name: Roy
Papago GoSafe S780 2-Channel 1080p Dash
Hi,
I have been using GoSafe S780 (front and rear cameras) in my car for over 7 years and is working fine until a few days ago the rear camera no show; I've tried unplug the cables and the power supply but with no avail, now only the front cam is on; what could be the problem?...
Drive
Name: Marcos Motta
Polaroid PL800 Quadcopter
adquiri um drone PL800, na caixa com manual. No entanto tentei baixar no celular o drive ou softwere para o celular, fazendo leitura do QR CODE do manual. Não teve jeito de abrir
Preciso de ajuda...
SQ 7 PDF
Name: Yash Deshmukh
Allen & Heath SQ-7 48-Channel 36-Bus
I want to download PDF ...
|
|
