User manual
K 5600 Lighting Alpha 6 9K

User Manual for K 5600 Lighting Alpha 6 9K Complete System Kit

• Product category: HMI & Plasma Lights K 5600 Lighting
• Brand: K 5600 Lighting
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for K 5600 Lighting HMI & Plasma Lights

Product description

• Alpha 9K HMI Lamp Head with Safety Screen The K5600 Alpha 9K HMI Lamp Head with safety screen employs a unique design which pairs a high efficiency quartz composite reflector that out-performs aluminum reflectors by 15%, with structural air vents that allow the head to run cool enough to angle it straight down during operation. The "open-eye" construction yields a hard light effect with crisp, sharply defined shadows. The slim, 17.7" profile head accepts an optional protective Pyrex lens or an optional Fresnel lens that transforms the luminaire into a focused light source with a 10 - 60 degree beam angle range. The sturdy, steel yoke has both Junior 1 1/8" and a Baby 5/8" male mounting pins. The Alpha 9K requires separate purchase of an HMI lamp the 6/9K Ballast for use.
  Reflector
  • Quartz composite reflector is 15% brighter than standard aluminum reflectors
  Optional Fresnel Lens
  • The optional Fresnel lens converts the standard "open-eye" HMI fixture to a focused light source with a wide beam angle range
  Cooling
  • The combination of the high-efficiency small quartz reflector with computer-designed structural air vents provides efficient convection cooling in any operating position - even pointing straight down
  Lamp Suspension
  • Quick and safe release of the optional lamp via a simple latch on the ceramic G38 socket
  Versatility
  • Alpha 9K can be used with the optional SpaceBeam snoot-like accessory to create bright daylight effects
• Fresnel Lens with Ring for Alpha 9K The Fresnel Lens with Ring for Alpha 9K from K5600 is a drop-in Pyrex lens that concentrates the output and creates a highly controllable beam angle from 10 - 60 degrees.
• Barndoor Set for Alpha 9K Lamp Head The K5600 Barndoor Set for Alpha 9K Lamp Head is a 4-way metal light modifier that allows you to selectively illuminate your set or subject.
• Head Cable for Alpha 9K (50') The 50' Head Cable for Alpha 9K HMI fixture is required to connect the head to the separately-purchased 6/9K Ballast.
• 6K/9K Ballast for Alpha 9K HMI Lamp Head The 6K/9K Ballast for Alpha 9K HMI Lamp Head from K5600 is a dimmable power supply rated for use with 190-265 VAC current. The 54.6 lb compact unit can power the 2.5, 4, 6 and 9K Alphas and run them at 100 Hz, 300 Hz and even at 1000 Hz. This ballast has an Auto Scan function which automatically corrects variation in frequency to ensure stable shooting at any speed.

• Limited 1-Year Warranty

• Limited 1-Year Warranty

• Limited 1-Year Warranty

• Mains Cable

• Limited 1-Year Warranty

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• Alpha 9K HMI Lamp Head with Safety Screen

  Rating	9,000 W
  Socket (Lampholder)	G38
  Lens	None, optional Fresnel lens
  Beam Angle	80° Without lens 10 - 60° With optional Fresnel lens
  Mounting	1 1/8" (28 mm) and 5/8" (16 mm)
  Dimensions	Height: 30.12" (76.5 cm) Depth: 17.7" (45 cm) Diameter: 25.6" (65 cm)
  Weight	75 lb (34 kg) 87 lb (39.5 kg) with lens

• Fresnel Lens with Ring for Alpha 9K

  Type	Fresnel
  Material	Pyrex
  Beam Angle	10 - 60°
  Diameter	17.7" (450 mm)

• 6K/9K Ballast for Alpha 9K HMI Lamp Head

  Power	190 - 265 VAC
  Power Consumption	42 A @ 230 V for 9 K, 28 A @ 230 V for 6 K
  Frequency	100, 300, 1000 Hz
  Dimensions	18.3 x 10.25 x 12.2 (46.5 x 26 x 31 cm)
  Weight	54.6 lb (24.8 kg)

• Barndoor Set for Alpha 9K Lamp Head
• Head Cable for Alpha 9K (50')

Rating

Discussion