User Manual for Kramer VP-773AMP 8-Input HDMI and HDBaseT ProScale Presentation Scaler Switcher with 2K Support and Audio Power Amplifier Click to enlarge the picture
Contents of the user manual for the Kramer VP-773AMP 8-Input HDMI and HDBaseT
- Product category: Routers & Switchers Kramer
- Brand: Kramer
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Kramer Routers & Switchers
|
User manual for the Kramer VP-773AMP 8-Input HDMI and HDBaseT contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Kramer product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Kramer user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Kramer product will considerably shorten its lifespan!
|
Product description The VP-773AMP 8-Input HDMI and HDBaseT ProScale Presentation Scaler/Switcher with 2K Support and Audio Power Amplifier from Kramer is a 1U rackmonutable switcher and scaler that accepts one of eight inputs. The inputs consist of one DisplayPort, one composite video, two VGA, and four HDMI. The VP-773AMP outputs HDTV and computer graphics resolutions up to 2K (2048x1080), 1080p, and UXGA with selectable refresh rates. It scales the video, embeds the audio from the input signal, and simultaneously outputs the signal to two HDMI and one HDBaseT TP output. The audio output is simultaneously available on digital, unbalanced analog stereo, and two 10 watt amplified speaker outputs.
The VP-773AMP features advanced digital signal processing technology and offers a versatile set of features that includes Picture-in-Picture functions, luma keying, and emergency alert notifications. The VP-773AMP incorporates a certified HDBaseT output port that works with all Kramer's HDBaseT receivers and cables, letting you send your scaled video image up to 590' in Ultra Mode. You can control the switcher using the on-screen display and front buttons on the unit itself, with the included IR remote, or via the built-in web interface.
Ideal applications for the VP-773AMP include conference rooms, boardrooms, auditoriums, hotels and churches, production studios, rental and staging, or any application where high-quality conversion and switching of multiple and different video signals to graphical data signals is required for projection purposes. - Picture-in-Picture
- The VP-773AMP features Kramer's unique customization technology for picture sizing. Using two pictures, this allows Picture-in-Picture, Picture-and-Picture, or any other dual window display. Using the Picture-in-Picture technology, two inputs can be shown simultaneously while both images can be sized in any manner and positioned anywhere on the screen.
- Luma Keying
- Easily composite two video source into a single image. By setting up a "key" image or clip on a black background, this image can be overlaid onto the primary video.
- National and Local Emergency Alerts
- The scaling switcher includes a unique, versatile feature for immediate text overlaying, with flexible options such as the inclusion of an audio alert siren, and the choice of displaying via either a text crawler or a text window. The system complies with the standard of the official national warning system, the Emergency Alert System (EAS), which works in coordination with the Federal Emergency Management Agency (FEMA) with a number of Us national emergency agencies.
The VP-773AMP also supports automated campus emergency alerts suitable for systems such as education facilities, corporate campuses, stadiums, and more. When connected to a network, the switcher will automatically display the alert message when it is sent out. Emergency alert messages are composed and transmitted using the XML-based Common Alert Protocol (CAP) application. Messages with "Extreme" and "severe" headers will appear nearly full screen, while messages with lower levels of severity will appear as text crawls along the bottom of the image. - Full Web Page Management
- Management your VP-773AMP on the web when connected through Ethernet. The built-in web interface provides simplified setup and remote access to switching, windows customization, scaling, and de-interlacing. You can also configure, navigate, and monitoring the unit's features. Additional, the web interface allows you to control picture positioning and sizing, input and output color space, color depth, noise reduction, motion sensitivity, audio and image settings, and more. Advanced features such as Luma keying, EAS, EDID management, port tunneling, and keystoning effects can also be controlled.
- Additional Features
-
- High-quality 3:2 and 2:2 pull down de-interlacing and full up and down-scaling of all video input signals
- Fast video switching transitions for smooth fades to black with no glitches
- HDTV compatible
- HDCP compliant
- Advanced EDID management
- 6.75 Gbps maximum data rate (2.25 Gbps per graphic channel)
- Scaled outputs: Two HDMI and one HDBaseT TP simultaneously
- Multiple aspect ratio selections: Follow input, follow output, best fit, letterbox, and custom setting
- Advanced de-interlacing functions: 3D comb filtering, film mode, diagonal correction, and motion detection
- HDMI Deep Color support
- Vertical keystone operation
- Built-in processing amplifier with enhanced functions such as color correction, gamma, and dither
- Multi-standard video support: NTSC (3.58/4.43), PAL (M/N/60), and SECAM
- Built-in time base corrector for unstable video sources
- Picture zooming: both on main and PIP window from 100% to 1600%, with separate V and H sharpness control
- Input and output color space control
- Audio support: Unbalanced stereo audio inputs, with two microphone inputs; digital stereo and balanced stereo outputs; input and output audio level adjustment
- Audio amplifier and speaker output (2 x 10W)
- Selectable microphone talkover or mix modes
- Auto detection and selection of embedded audio
- Range: up to 430' (130 m) normal mode; up to 590' (180 m) in ultra mode (1080p at 60Hz and 24bpp) when using Cat-6 cables
- On-screen display for easy setup and adjustment, accessible via the IR remote control and via the front-panel buttons
- Non-volatile memory saves your last settings
- Firmware upgrades via Ethernet and RS-232
- Control via front panel buttons and on-screen display, IR remote, or embedded web server
- Port tunneling: A bidirectional RS−232 interface where simple control commands and data can flow in both directions from a controller to the VP-773AMP via the Ethernet, allowing status requests and control of the destination unit
- Selectable power save modes for energy efficiency
- Worldwide 100 to 240 VAC power supply
- 1RU rack size for 19" racks
- Rack ears included
In the Box Kramer VP-773AMP 8-Input HDMI and HDBaseT ProScale Presentation Scaler/Switcher with 2K Support and Audio Power Amplifier Power Cord IR Remote Controller Rack Ears Limited 7-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Kramer VP-773AMP 8-Input HDMI and HDBaseT ProScale Presentation Scaler Switcher with 2K Support and Audio Power Amplifier in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersKramer VP-773AMP Specs | Inputs | 4 x HDMI
2 x VGA, 15−pin HD connector
1 x Composite video, RCA connector
1 x DisplayPort
1 x CV unbalanced stereo audio, left and right RCA connectors
2 x 3.5mm mini jack | | Outputs | 2 x HDMI
1 x HDBaseT, RJ-45 connector
1 x S/PDIF digital audio, RCA connector
1 x balanced stereo audio, 5-pin terminal block connector
1 x Stereo speaker output (2 x 10 W), 4−pin terminal block connector | | Standards Compliance | HDMI (Deep Color)
HDCP
DisplayPort 1.1a | | Input Resolutions | VGA:
640x480 @ 60/72/75/85 Hz
800x600 @ 56/60/72/75/85 Hz
1024x768 @ 60/70/75/85 Hz
1152x864 @ 75 Hz
1280x768 @ 60 Hz
1280x800 @ 60 Hz
1280x960 @ 85 Hz
1280x1024 @ 60/75/85 Hz
1360x768 @ 60 Hz
1366x768 @ 60 Hz
1440x900 @ 60 Hz
1400x1050 @ 60/75 Hz
1600x900 @ 60 Hz
1600x1200 @ 60 Hz
1680x1050 @ 60 Hz
1920x1200 @ 60 RB
525p60
625p50
720p 50/60
1080p 50/60
DisplayPort:
640x480 60/75/85 Hz
800x600 @ 50/60/72/75/85 Hz
1024x768 @ 60/70/75/85 Hz
1152x864 @ 75 Hz
1280x800 @ 60 Hz
1280x960 @ 85 Hz
1280x1024 @ 60/75/85 Hz
1360x768 @ 60 Hz
1366x768 @ 60 Hz
1440x900 @ 60 Hz
1400x1050 @ 60/75 Hz
1600x900 @ 60 Hz
1600x1200 @ 60 Hz
1680x1050 @ 60 Hz
1920x1200 @ 60 RB
720p60
1080p60
2048x1080 @ 50/60 Hz
Composite Video:
NTSC
PAL
HDMI:
640x480 @ 60/72/75/85 Hz
800x600 @ 56/60/72/75/85 Hz
848x480 @ 60 Hz
1024x768 @ 60/70/75/85 Hz
1152x864 @ 75 Hz
1280x768 @ 60 Hz
1280x800 @ 60 Hz
1280x960 @ 85 Hz
1280x1024 @ 60/75/85 Hz
1360x768 @ 60 Hz
1366x768 @ 60 Hz
1440x768 @ 60 Hz
1400x1050 @ 60/75 Hz
1600x900 @ 60 Hz
1600x1200 @ 60 Hz
1680x1050 @ 60 Hz
1920x1200 @ 60 RB 480i60
576i50
480p60
576p50
720p 24/25/30/50/60
1080i 50/60
1080p 23.976/24/25/30/50/60
2048x1080 @ 50/60 Hz | | Output Resolutions | HDMI:
640x480 @ 60/75 Hz
800x600 @ 50/60/75 Hz
1024x768 @ 50/60/75 Hz
1280x768 @ 50/60 Hz
1280x800 @ 60 Hz
1280x1024 @ 50/60/75 Hz
1360x768 @ 60 Hz
1366x768 @ 50/60 Hz
1400x1050 @ 50/60 Hz
1600x900 @ 60 Hz
1600x1200 @ 50/60 Hz
1680x1050 @ 60 Hz
1920x1200 @ 60 Hz
480i60
576i50
480p60
576p50
720p 50/59.94/60
1080p 23.976/24/25/29.97/30/50/59.94/60
2048x1080 @ 50/60 Hz | | Controls | Front panel buttons
OSD
IR remote control
RS-232, 9-pin D-sub connector
Ethernet | | Operating Temperature | 32 to 104°F (0 to 40°C) | | Storage Temperature | -49 to 158°F (-40 to 70°C) | | Humidity | 10 to 90%, non-condensing | | Power Source | 100 to 240 VAC, 40 VA max. | | Rackmountable | 1 RU height, 19" rack | | Dimensions (W x H x D) | 19.00 x 1.75 x 9.30" (48.26 x 4.45 x 23.62 cm) | | Weight | Approx. 6.6 lb (3.0 kg) | | | | Package Weight | 7.35 lb | | Box Dimensions (LxWxH) | 21.575 x 13.228 x 4.331" |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 91 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
