|
User Manual for Lexar Professional Workflow HR2 Hub with SDHC SDXC and CompactFlash Card Reader Kit Click to enlarge the picture
Contents of the user manual for the Lexar Professional Workflow HR2 Hub with
- Product category: Memory Card Readers Lexar
- Brand: Lexar
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Lexar Memory Card Readers
|
User manual for the Lexar Professional Workflow HR2 Hub with contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Lexar product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Lexar user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Lexar product will considerably shorten its lifespan!
|
Product description This B&H Kit combines the Lexar Professional Workflow HR2 4-Bay Thunderbolt 2/USB 3.0 Hub with the Lexar Professional Workflow SR2 SDHC / SDXC UHS-II USB 3.0 Card Reader, and the Lexar Professional Workflow CFR1 Card Reader for CompactFlash Cards. Compatible with Windows and Mac, this kit is designed to take advantage of Thunderbolt 2 and USB 3.0 transfer speeds, and is also backwards compatible with Thunderbolt and USB 2.0.
The Lexar Professional Workflow HR2 4-Bay Thunderbolt 2/USB 3.0 Hub is a 4-bay hub that supports Lexar's Professional Workflow line of USB 3.0 storage drives and Thunderbolt 2/USB 3.0 card readers that are compatible with SDHC/SDXC UHS-I and UHS-II, CompactFlash UDMA 7, XQD, CFast 2.0, and microSDHC/microSDXC UHS-I cards. You can connect this hub using either Thunderbolt 2 or USB 3.0 technology, as well as add up to four flash-based storage drives to this hub and store transferred files. However, even if you connect this hub to the computer with Thunderbolt 2, the drives and readers will still operate at USB 3.0 speed. However, because Thunderbolt 2 supports a faster overall speed, you can use all four devices in the bay simultaneously, without suffering any degradation in transfer speed. The Lexar Professional Workflow SR2 SDHC / SDXC UHS-II USB 3.0 Card Reader is a USB 3.0 compatible card reader that may be combined with a Workflow Hub to create a complete storage solution. This modular card reader accepts SDHC and SDXC memory cards and leverages the speed of USB 3.0 connectivity to provide enhanced data transfer rates allowing you to move large files quickly to and from the card. The Lexar Professional Workflow CFR1 Card Reader for CompactFlash Cards is a USB 3.0 reader designed for use within the Lexar Professional Workflow HR2 Hub. The compact form fits within one of the four bays of the HR2 Hub to enable its use along with up to three additional Professional Workflow Card Readers. Alternatively, this reader can be used independently of the hub as a standalone reader along with the included USB cable. This reader is designed for use with CompactFlash UDMA 7 memory cards and supports USB 3.0 transfer speeds up to 5 Gb/s. The configurable structure of the hub allows users to insert a variety of card reader types or storage based on personal needs. Please note that while this kit only includes the card readers for SDHC/SDXC and CompactFlash cards. Other Lexar-compatible card readers that support microSDHC/microSDXC, XQD, and CFast 2.0 cards, as well as the Workflow HR2 Hub, are available and sold separately. - Lexar Professional Workflow HR2 4-Bay Thunderbolt 2/USB 3.0 Hub The Professional Workflow HR2 4-Bay Thunderbolt 2/USB 3.0 Hub from Lexar is a 4-bay hub that supports Lexar's Professional Workflow line of USB 3.0 storage drives and Thunderbolt 2/USB 3.0 card readers. You can connect this hub using either Thunderbolt 2 or USB 3.0. You can also add up to four flash-based storage drives to this hub and store transferred files. Even if you connect it to the computer with Thunderbolt 2, the drives and readers will still operate at USB 3.0 speed. However, because Thunderbolt 2 supports a faster overall speed, you can use all four devices in the bay at the same time, without slowing down. The hub is also backwards compatible with Thunderbolt and USB 2.0 (at slower speeds), while using the same cables and connectors. Note: The readers and drives are sold separately.
High-Speed, Simultaneous Transfer, and Backup of Files - Transfer and Backup Images and Video from Multiple Memory Cards at Once
- This Professional Workflow HR2 is a 4-bay reader and storage drive hub that connects to a computer via Thunderbolt 2 or USB 3.0. Separately sold USB 3.0 card readers support SDHCTM/SDXCTM UHS-I, CompactFlash UDMA 7, XQDTM, and CFast 2.0 (USB 3.0 or Thunderbolt 2) formats, while separately sold USB 3.0 flash-based storage drives offer 256GB and 512GB capacities. For added versatility, you can remove the readers and storage drives from the hub for individual use on the go.
- Offload Your Work
- This Professional Workflow HR2 hub leverages USB 3.0 technology for high-speed performance and is also designed to deliver Thunderbolt 2 speeds. The Thunderbolt 2 technology gives photographers and videographers the ability to transfer 4K video and other large media files, at up to twice the speed of Thunderbolt and up to four times the speed of USB 3.0 devices. It is also backwards compatible with Thunderbolt and USB 2.0 (at slower speeds), when you use the same cables and connectors.
- Backup Large Files
- You can add up to four flash-based storage drives to this hub and store transferred files.
- Simple Setup and Use
- Simply plug the readers or storage drives into the hub and start transferring and archiving files. In addition, the Professional Workflow HR2 hub provides two Thunderbolt 2 ports and one USB 3.0 port, making it easy to daisy-chain with your existing setup. The two Thunderbolt 2 ports allow you to place the hub anywhere in your lineup of other Thunderbolt devices to create a customizable setup. The hub helps you to eliminate cable clutter and take control of the workflow.
UPC: 650590185955 - Lexar Professional Workflow SR2 SDHC / SDXC UHS-II USB 3.0 Card Reader Use the Professional Workflow SR2 SDHC / SDXC UHS-II USB 3.0 Card Reader from Lexar by itself as a USB 3.0 compatible card reader or combine it with a Workflow Hub from Lexar to create a complete storage solution. This modular card reader accepts SDHC and SDXC memory cards and leverages the speed of USB 3.0 connectivity to provide enhanced data transfer rates allowing you to move large files quickly to and from the card.
- Transfers and backs up images and video from SDHC and SDXC memory cards
- Leverages USB 3.0 technology for high-speed transfer and backup of RAW images, high-res photos, and HD, 3D, and 4K video
- Innovative, modular design
- Use this reader with a hub or on-the-go
UPC: 650590194568 - Lexar Professional Workflow CFR1 Card Reader for CompactFlash Cards The Lexar Professional Workflow CFR1 Card Reader for CompactFlash Cards is a USB 3.0 reader designed for use within the Lexar Professional Workflow HR1 or HR2 Hubs. The compact form fits within one of the four bays of the HR1 Hub to enable its use along with up to three additional Professional Workflow Card Readers. Alternatively, this reader can be used independently of the hub as a standalone reader along with the included USB cable.
This reader is designed for use with CompactFlash UDMA 7 memory cards and supports USB 3.0 transfer speeds up to 5 Gb/s. - CompactFlash UDMA 7 card reader compatible with Professional Workflow HR1 or HR2 Hubs.
- Can be used within the hub with up to three additional Professional Workflow Card Readers.
- USB 3.0 interface for high-speed transferring up to 5 Gb/s.
- Can be used independently of hub as a compact, dedicated CompactFlash card reader.
- Compatible with Mac OS X 10.6 or later and Windows 7/8 operating systems.
UPC: 650590194605 In the Box - Professional Workflow HR2 4-Bay Thunderbolt 2/USB 3.0 Hub zcwuqwdereudzqdzfffqdvzfavscdwbzdrssbd
- Limited 2-Year Warranty
- Professional Workflow SR2 SDHC / SDXC UHS-II USB 3.0 Card Reader
- Professional Workflow CFR1 Card Reader for CompactFlash Cards
Table of Contents
|
Upload User Manual
Have you got an user manual for the Lexar Professional Workflow HR2 Hub with SDHC SDXC and CompactFlash Card Reader Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Lexar Professional Workflow HR2 4-Bay Thunderbolt 2/USB 3.0 Hub
| Host Computer Interface | USB 3.1 Gen 1 (5 Gb/s), Thunderbolt 2 (20 Gb/s) | Bus Power | None | | Box Dimensions (LxWxH) | 11.339 x 8.268 x 3.543" | - Lexar Professional Workflow SR2 SDHC / SDXC UHS-II USB 3.0 Card Reader
| Memory Card Slots | 1 x SDXC (UHS-I [104 MB/s]) | Host Computer Interface | USB 3.1 Gen 1 (5 Gb/s) | Bus Power | None | | Operating Temperature | 32 to 158°F / 0 to 70°C | Storage Temperature | -85 to 302°F / -65 to 150°C | | Box Dimensions (LxWxH) | 4.9 x 3.7 x 2.2" | - Lexar Professional Workflow CFR1 Card Reader for CompactFlash Cards
| Memory Card Slots | 1 x CompactFlash Type II (UDMA 7 [167 MB/s]) | Host Computer Interface | USB 3.1 Gen 1 (5 Gb/s) | Bus Power | None | | Dimensions (W x H x D) | 2.4 x 2.9 x 0.9" / 60.0 x 74.0 x 23.0 mm | | Box Dimensions (LxWxH) | 4.9 x 3.7 x 2.2" |
Rating60% users recommend this product to others. And what about you?
This product has already been rated by 46 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Trijacon ACOG USMC scope... Pyle Pro BTA 62BT 6-Zone Stereo Receiver Bluetooth... LG Gram 17 Laptop... LG 300W 2.1 ch surround sound manual. It has the soundbar, subwoofer, wireless receiver for connected rear speakers and wireless controller. ... Konus KonuSpot-60C 20-60x60 Spotting Scope...
|
Discussion |
Latest contributions to the discussion:
Settings access and setup Name: Edwin Derks Nuance PaperPort 14 I had a problem with Paperport loading. Through the remote efforts of a Tech was able to get back online, however, "settings" are only listed 1 - 5 with no action listed as was 'visibly' available, (i.e. Scan both sides, Black and White, Color, etc.)
1. how to change, 2. wha... query Name: Vudayagiri Balasubramanyam Bose Wave SoundTouch Music System IV how to set up my bose radio with my remote working-class ... Hi. I didn’t even get a chance to try it once! :( plz help Name: Eric Tasakovic Keeley Dark Side Pedal I ordered a dark side pedal second hand online for 20 bucks cheaper than it would have been to buy it new….20 measly bucks. Anyway…it didn’t come with a power supply. I messed up and accidentally plugged in a 9v ac output power supply in, instead of the required 9v dc. I’... Conectare wi-fi Name: Zazuleac Gheorghe ezviz CV-206 Mini O 720p Wi-Fi Cv ezviz nu se conecteaza la router upc.... Conectare wi-fi Name: Gheorghe Zazuleac ezviz CV-206 Mini O 720p Wi-Fi Nu pot conecta cv wi-fi ezviz la router upc- vodafone....
|
|