User manual
MicW i436 Mobile-Measurement Microphone Kit

User Manual for MicW i436 Mobile-Measurement Microphone Kit

• Product category: Mobile Microphones MicW
• Brand: MicW
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for MicW Mobile Microphones

Product description

• i436 Professional Class 2 Microphone for iPad, iPhone and iPod touch
  • Product Demo
  As an alternative to the internal microphone on your iPad, iPhone or iPad touch, consider using the i436 Professional Class 2 Microphone for iPad, iPhone and iPod touch from Mic-W. This calibrated measurement microphone complies with the IEC 61672 class 2 sound level meter standard. The sensitivity and frequency response is individually calibrated.
  
  By downloading an app, you can use your iPhone or iPad as a sound pressure level meter or a real time analyzer for time and frequency domain measurements. This omnidirectional microphone is durable yet portable, as it can fit into a pocket. It allows you to use your device to measure vocals, instruments, and live sounds accurately with minimal distortion.
  • Calibrated measurement microphone that complies with the IEC 61672 class 2 sound level meter standard
  • Can be used as a high quality alternative to the internal microphone on an iPad, iPhone or iPod touch
  • Can be used in professional applications for acoustic measurement as well as general sound recording
  • Use for recording vocals, instruments, musical performances, interviews and meetings where you want to capture high quality sound
  • Microphone is calibrated to allow professional sound engineers to use it with the many apps available for the iPad; use your iPad, iPhone or iPod touch as a real time analyzer or sound level meter
• Windscreen for i436 & i456 Microphones The Windscreen from Mic-W is designed to be attached to a Mic-W i436 or i456 microphone to effectively minimize wind noise during recordings.
• Collar Clip for i436, i456 & i266 Microphones The Collar Clip from Mic-W is designed to hold Mic-W's i436, i456 or i266 microphone and attach to a shirt collar during audio recordings.
• Extension Cable for i Series Microphones - 6.6' The Extension Cable from Mic-W allows you connect your iPhone, iPod touch or iPad to your Mic-W i series microphone. Rather than plugging the microphone directly into the headphone jack, this extension cable gives you the freedom of using the microphone up to 6.6 feet away from your device.
• Split Cable for i Series Microphones The Split Cable from Mic-W is designed to be used with the Mic-W i series microphones. The male connector attaches to the headphone jack of your iPhone, iPod touch or iPad, while the two female ports on the other end allow you to connect the microphone as well as earbuds.
• Aluminum Tube for i Series Microphones The Aluminum Tube from Mic-W can be used as a standalone holder for a Mic-W i series microphone, or can be used with a tripod. The tube is outfitted with a standard 3/8" screw and hole for the microphone. When you're not using the microphone, you can even store it inside of the tube.

• User Manual

• 1-Year Warranty

• 1-Year Warranty

• 1-Year Warranty

• 1-Year Warranty

• 1-Year Warranty

• 1-Year Warranty

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• i436 Professional Class 2 Microphone for iPad, iPhone and iPod touch

  Type	Electret condenser
  Capsule	7 mm diameter; can be calibrated
  Principle of Operation	Pressure
  Polar Pattern	Omnidirectional
  Connector	3.5 mm 4-pole headset interface
  Sensitivity	-44 dB (0 dB + 1V/pa, 1 kHz)
  Frequency Response	20 Hz - 20 kHz
  Signal to Noise Ratio	More than 62 dB
  Impedance	Less than 2.2 k
  Operating Temperature	-4 to 122° F (-20 to 50° C)
  Length	2.0" (50 mm)
  Weight	0.3 oz (8 g)

  Box Dimensions (LxWxH)	2.3 x 2.2 x 1.5"

• Windscreen for i436 & i456 Microphones

  Material

  Foam

  Box Dimensions (LxWxH)	4.1 x 2.9 x 0.05"

• Collar Clip for i436, i456 & i266 Microphones

  Box Dimensions (LxWxH)	3.4 x 2.0 x 0.03"

• Extension Cable for i Series Microphones - 6.6'

  Length

  6.6' (2.0 m)

  Box Dimensions (LxWxH)	7.0 x 3.0 x 1.0"

• Split Cable for i Series Microphones

  Box Dimensions (LxWxH)	4.0 x 2.5 x 1.0"

• Aluminum Tube for i Series Microphones

  Box Dimensions (LxWxH)	4.1 x 2.1 x 0.05"

Rating

Discussion