|
User Manual for Midas M32R 40-Input Digital Mixing Console Click to enlarge the picture
Contents of the user manual for the Midas M32R 40-Input Digital Mixing Console
- Product category: Digital Mixers Midas
- Brand: Midas
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Midas Digital Mixers
 |
User manual for the Midas M32R 40-Input Digital Mixing Console contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Midas product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Midas user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Midas product will considerably shorten its lifespan!
|
Product description The Midas M32R is a digital mixing console that features 16 Midas PRO microphone preamplifiers, 25 time-aligned and phase-coherent mix buses, 8 digital FX engines, and up to 40 simultaneous input channels when used with an optional networked remote I/O solution such as the Midas DL16 digital stage box. This console is an ideal choice for a multitude of live sound, broadcast, studio recording and post production applications.
The M32R console features 17 Midas PRO motorized 100 mm faders that are rated for 1 million life cycles. Currently able to capture audio at 24-bit, 48 kHz sample resolution, the console is "future-proofed" with 96 kHz capable open architecture, which Midas intends to make available for the line.
The M32R includes an extensive array of on-board effects, featuring 8 stereo, studio-grade effects engines, each assignable to any input, group or output mix bus. Choose from high-end FX modules, including a range of reverbs, delays, EQs, dynamics, and much more. Modeled after some of history's most iconic and sought-after effects processors such as the Teletronix LA-2A, Urei 1176LN, Fairchild 670, and the Pultec EQP-1a, the M32R's effects run inside the low-latency, 40-bit floating point environment of the mix engine. - Features:
-
- Live performance and studio recording digital console with up to 40 simultaneous input channels
- 16 Midas PRO microphone preamplifiers
- 25 time-aligned and phase-coherent mix buses
- AES50 networking allows up to 96 inputs and 96 outputs
- Open architecture allows for future 96 kHz operation
- 192 kHz ADC and DAC converters for outstanding audio performance
- Industry-leading design by Bentley Motors Designer
- High-performance aluminum and high-impact steel structure
- Rack-mount brackets included for ultimate flexibility
- 40-bit floating point digital signal processing
- 8 DCA and 6 mute groups
- 8 digital signal processing effects engines
- 17 Midas PRO motorized 100 mm faders
- Daylight viewable 5" full-color TFT display screen
- Optional expansion cards: ADAT, MADI, Dante
- Included, pre-installed USB card allows console to act as 32 x 32 channel USB 2.0 audio interface
- DAW remote control emulations of Mackie Control and HUI protocols
- Optional wireless remote control with Midas Apps for iPhone and iPad
- Auto-ranging universal switch-mode power supply
UPC: 653341305831 In the Box Midas M32R 40-Input Digital Mixing Console Power Cord Rack-Mount Brackets Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Midas M32R 40-Input Digital Mixing Console in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersMidas M32-R Specs | | | Input Channels | 32 input channels, 8 aux channels, 8 FX return channels | | Output Channels | 8 / 16 | | Buses | 16 aux buses, 6 matrices, main LRC: 100 | | Effects Engine | 8 / 16, (True Stereo / Mono) | | Automation | Internal Show Automation (Structured Cues / Snippets): 500 / 100 | | Scenes | Internal Total Recall Scenes (Incl. Preamplifiers and Faders): 100 | | Signal Processing | 40-bit floating point | | A/D and D/A Conversion | A/D Conversion (8-channel, 96 kHz Ready): 24-bit, 114 dB dynamic range, A-weighted
D/A Conversion (stereo, 96 kHz Ready): 24-bit, 120 dB dynamic range, A-weighted | | Latency | 0.8 ms, (I/O, console input to output)
1.1 ms, (network latency, stage box in > console > stage box out) | | | | Preamplifier | Midas PRO Series Microphone Preamplifiers (XLR): 16 | | Talkback | Talkback Microphone Input (XLR): 1 | | RCA | RCA Inputs / Outputs: 2 / 2 | | Audio Out (XLR) | XLR Outputs: 8 | | Monitoring Outputs | Monitoring Outputs (XLR / ¼" TRS Balanced): 2 / 2 | | Auxiliary | Aux Inputs/Outputs (¼" TRS Balanced): 6 / 6 | | Headphones | Phones Output (¼" TRS): 1 (Stereo) | | Networking | AES50 Ports (Klark Teknik SuperMAC): 2
Ultranet P-16 Connector (No Power Supplied): 1 | | Expansion | Expansion Card Interface: 32 Channel Audio Input / Output | | MIDI | MIDI Inputs / Outputs: 1 / 1 | | USB | USB Type A (Audio and Data Import / Export): 1
USB Type B: 1, rear panel, for remote control | | Ethernet | RJ45: 1, rear panel, for remote control | | | | Design | Midas PRO Series | | THD+N | THD+N (0 dB gain, 0 dBu output): <0.01% unweighted
THD+N (+40 dB gain, 0 to +20 dBu output): <0.03% (unweighted) | | Input Impedance | Input Impedance (Unbalanced / Balanced): 10 kOhms / 10 kOhms | | Maximum Input Level | Non-Clip Maximum Input Level: +23 dBu | | Phantom Power | +48 V, (switchable per input) | | Equivalent Input Noise | @ +45 dB gain (150 ohm source): -125 dB (22 Hz - 22 kHz, unweighted) | | CMRR | CMRR @ Unity Gain (Typical): >70 dB
CMRR @ 40 dB Gain (Typical): >90 dB | | | | Frequency Response | @ 48 kHz Sample Rate: 0 to -1 dB (20 Hz - 20 kHz) | | Dynamic Range | Analog In to Analog Out: 106 dB (22 Hz - 22 kHz, unweighted)
A/D, Preamplifier and Converter (Typical): 109 dB (22 Hz - 22 kHz, unweighted)
D/A, Converter and Output (Typical): 109 dB (22 Hz - 22 kHz, unweighted) | | Crosstalk Rejection Typically @ 1 kHz | 100 dB, adjacent channels | | Output Level | XLR Connectors (Nominal / Maximum): +4 dBu / +21 dBu | | Output Impedance | XLR Connectors (Unbalanced / Balanced): 50 ohms / 50 ohms
TRS (Unbalanced / Balanced): 50 ohms / 50 ohms
Phones Output Impedance / Maximum output Level: 40 ohms / +21 dBu (Stereo) | | Input Impedance | TRS Connectors (Unbalanced / Balanced): 20 kOhms / 40 kOhms | | Maximum Input Level | Non-Clip Maximum Input Level, TRS Connectors: +21 dBu | | Output Level | TRS (Nominal / Maximum): +4 dBu / +21 dBu | | Residual Noise | Residual Noise Level, Out 1-16 XLR Connectors, Unity Gain: -85 dBu 22 Hz - 22 kHz unweighted
Residual Noise Level, Out 1-16 XLR Connectors, Muted: -88 dBu 22 Hz - 22 kHz unweighted
Residual Noise Level, TRS and Monitor out XLR Connectors: -83 dBu 22 Hz - 22 kHz unweighted | | | | Screens | Main Screen: 5" TFT LCD, 800 x 480 resolution, 262 k colors
Channel LCD Screen: 128 x 64 LCD with RGB color backlight
Main Meter: 18-segment (-45 dB to clip) | | | | Power Supply | Switch-Mode Power Supply: Auto-ranging 100 - 240 VAC (50 / 60 Hz) ±10% | | Power Consumption | 70 W | | | | Operating Temperature | 41 - 104°F (5 - 40°C) | | Dimensions | 18.8 x 24.3 x 8.2" (478 x 617 x 208 mm) | | Weight | 31.5 lb (14.3 kg) | | | | Package Weight | 43.6 lb | | Box Dimensions (LxWxH) | 28.0 x 24.0 x 13.0" |
Rating96% users recommend this product to others. And what about you?
This product has already been rated by 73 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Expert intel sixcore i5-8400 4GHZ turbo...
Color LaserJet Pro MFP M281fdw...
call of duty world war II...
Audio Technica AUDIO-AT8631
data sheet ...
Sunpak Ultra 7000TM 2-1 tripod/monopod...
|
| Discussion |
Latest contributions to the discussion:
Query
Name: Geoff Dibblee
Carson zOrb Digital USB Microscope
when useing the zorb it will not cover the whole of a stamp back or front as i am useing it for perfins stamps and whati have recived in the box just covers half a letter please can you help me to find away to enlarg the whole stamp
...
Blown transformer
Name: Dik Schouten
Demeter VTDB-2 Single Channel Tube Direct
Dear Sirs,where can i buy a new transformer for my VTDB 2b? If possible een 230 volt primary site...Y.S. Dik Schouten
...
Battery charger light does not turn yellow or green when charging LP-E17
Name: DAVE
Canon LC-E17 Charger for LP-E17 Battery
I have a new Canon battery charger for EOS R10 Camera. It has lights that turn yellow and green when charging the Canon battery that came with the camera. But when I put in the BM battery LP-E17 no lights come on. I can tell the battery is charged when I put it in the camera, b...
Stiff center dial wheel
Name: Reynolds, Jane
Tasco 10x50 Essentials Porro Binocular
It is very hard for me to turn the center wheel with the ridges on it.
Could you please email me the user manual for the Tasco 10 x 50 mm zip focus? Thank you...
Redfield 2-7x33
Name: Mike
Redfield 2-7x33 Revolution Riflescope
Can the elevation and windage knobs be reset to zero?
Thanks!...
|
|
