|
User Manual for Millennia HV-37 Two-Channel Microphone Preamplifier Rack Module Click to enlarge the picture
Contents of the user manual for the Millennia HV-37 Two-Channel Microphone Preamplifier Rack
- Product category: Microphone Preamps Millennia
- Brand: Millennia
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Millennia Microphone Preamps
|
User manual for the Millennia HV-37 Two-Channel Microphone Preamplifier Rack contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Millennia product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Millennia user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Millennia product will considerably shorten its lifespan!
|
Product description The Millennia HV-37 is a professional dual-channel microphone preamplifier that can be mounted into a 1RU rack space. The preamp features continuously variable gain control, offering up to 60 dB of gain, plus an additional 10 dB of gain when used in "Ribbon Mic Mode." It also features a high pass filter, phantom power, and an instrument input for high impedance sources such as bass guitars. The HV-37 is ideal for a wide range of studio applications such as recording vocals, guitars, bass, drum overheads, and more. - Continuously variable gain control
- Front panel instrument input
- DC coupled ribbon mic with 10 dB gain boost setting
- Signal Present (green) and Peak (red) LEDs
- Internal power supply - 100 to 240V operation
In the Box Millennia HV-37 Two-Channel Microphone Preamplifier Rack Module Limited 1-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Millennia HV-37 Two-Channel Microphone Preamplifier Rack Module in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersMillennia HV-37 Specs Gain | Minimum Gain: 14.5 dB, 1 dB with pad Maximum Gain (continuously variable): 60 dB (70 dB in Ribbon Mode) | Frequency Response | At -3 dB: < 10 Hz to > 200 kHz Typical -1.0 dB @ 10 Hz Typical -1.5 dB @ 200 kHz | Noise | At 60 dB Gain, 10 Hz - 30 kHz, Inputs common: -130 dB EIN | Total Harmonic Distortion/Noise | At 35 dB Gain, 10 Hz - 20 kHz bandwidth, +24 dBu Out: < 0.003%, Typical < 0.001% | Intermodulation Distortion | At (50 Hz & 7 kHz) 35 dB Gain: < 0.0006% +12 dBu Out < 0.001% +20 dBu Out | Phase Response | At 35 dB Gain, 50 Hz - 20 kHz bandwidth, +27 dBu Out: < 2 degrees deviation | Common Mode Rejection Ratio | At 35 dB Gain, 10 Hz - 20 kHz bandwidth, 100 mV C.M.: > 65 dB, Typical > 85 dB | Slew Rate | At 35 dB Gain, +24 dBu Out: > 25 V per microsecond | Maximum Input Level | At 20 Hz - 40 kHz: +12 dBu @ 0.02% THD+N +18 dBu @ 0.02% THD+N with pad | Maximum Output Level | At 1 kHz @ 35 dB of Gain, THD+N is: < 0.001% at +26 dBu output < 0.05% @ +28 dBu output | Input Impedance | Phantom: At 1 kHz: 2,210 ohms | Output Impedance | 24.3 ohms (x2) | Phantom Power | 48 VDC +/- 2 VDC | Dimensions | 19 x 1.75 x 9" (48.3 x 4.5 x 23 cm) | | Package Weight | 13.0 lb | Box Dimensions (LxWxH) | 21.3 x 21.0 x 5.2" |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 01 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
looking for a user manual for Quickbooks Premier Nonprofit 2020 for a Disabled American Veterans office.... Bower SFD9260.... 4-IN-1 WIRELESS CHARGER
... Brand :Gemini,model # XGA 4000,AND IT WAS PURCHASED NEW IN 2022,OR POSSIBLY EARLY 2023.WORKED perfect till one day I hit power switch and blew fuse x2... ZZSTAR binoculars...
|
Discussion |
Latest contributions to the discussion:
v18 Name: Craig Mcinturff Davis & Sanford Provista 7518B Tripod I am looking for a camera mounting plate for a v18 fluid head Davis & Sandford ... Impact SF-ABRL160 Flash stopped working Name: Sarah sananes Impact SF-ABRL160 Stand Mount Flash with Hello, our flash is connected to a canon camera and all of the sudden the flash is no longer working.
Does the flash have a certain battery life? ... REPEAT REQUEST AS YOU DID NOT ANSWER YOU JUST SENT ME MY MESSAGE BACK -PLEASE HELP Name: Tish Hopkins Benro TAD37C Series 3 Adventure Carbon Hi again-- all this did was send this email back to me with a link that brought me right back here... what is this?? also a link to search for manuals-- ive been there done that there is NO Manual to be found that answers my ? Please HELP thanks!!
Hi there is an extra small sc... Tripod heads DO NOT sit flush on the plate of the tripod Help Please Name: Tish Hopkins Benro TAD37C Series 3 Adventure Carbon Hi there is an extra small screw on the plate that the tripod head screws on that prevents my gimbal tripod head from sitting flush when it is screwed on. this is very annoying and does not allow my camera to stay steady when shooting. Please tell me how to resolve this issue. th... battery replacement Name: Danette L Boyd-Perez Doxie Go SE Portable Scanner Hello-- I have been working w/ support- it seems they sent incorrect battery replacement.
I confirmed DX-255 and was sent battery NP 120. There is no way that battery fits inside the panel of the DX-255. Please advise next steps thank you....
|
|