|
User Manual for Miranda CR0808-HD 8 x 8 HD SD Video Router Click to enlarge the picture
Contents of the user manual for the Miranda CR0808-HD 8 x 8 HD
- Product category: Routers & Switchers Miranda
- Brand: Miranda
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Miranda Routers & Switchers
|
User manual for the Miranda CR0808-HD 8 x 8 HD contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Miranda product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Miranda user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Miranda product will considerably shorten its lifespan!
|
Product description The Miranda CR0808-HD 8 x 8 HD/SD Video Router is used to route both SD and HD video signals using 8 input and 8 output ports. The 1RU compact router comes with a reliable power supply, offering over 500,000 hours MTBF, and SMPTE 292M connectors, which support 1.485Gbps data rates.
Miranda’s Compact Router System Configurator (CRSC) software helps you to configure IP setting, partition routers into multiple levels, build salvos and reconfigure large networks to suit facility workflows. You can even create a configuration offline and upload the settings to a system via the network. An optional control panel can be programmed for device level control using the CRSC software. - Used to route both SD and HD video signals using 8 input and 8 output ports
- Reliable power supply - offers over 500,000 hours MTBF
- Includes SMPTE 292M connectors that support 1.485Gbps data rates
- Compact Router System Configurator (CRSC) Software
-
- Helps configure IP setting, partition routers into multiple levels, build salvos and reconfigure large networks to suit different facility workflows
- Configuration can be created offline and uploaded to a system via the network
- Used to program an optional control panel for device-level control
Table of Contents
|
Upload User Manual
Have you got an user manual for the Miranda CR0808-HD 8 x 8 HD SD Video Router in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersMiranda CR0808-HD Specs | Electrical | AC input - 90–250 VAC, 50/60 Hz, auto-ranging
AC fuses - No user serviceable fuses
AC connectors: 2, 12 VDC with external modules
AC power: PS0001-00, HB0321-00, 50 W, one IEC 320
AC power usage: 20 W nominal (16 x 16 3Gig, SWB, SD)
35 W nominal (32 x 32 3Gig, SWB, SD)
6 W nominal (16 x 16 AES)
10 W nominal (32 x 32 AES)
9 W nominal (16 x 16 analog video)
16 W nominal (32 x 32 analog video)
18 W nominal (16 x 16 analog audio)
40 W nominal (32 x 32 analog audio)
12 W nominal (16 x 16 port machine)
22 W nominal (32 x 32 port machine)
Regulatory compliance: UL listed and CE compliant | | Mechanical | Dimensions
1RU for 16 x 16 (1.75", 45 mm) high
2RU for 32 x 32 (3.5", 89 mm) high - 19" (483 mm) wide
1.38" (35 mm) deep, without control panel
Exception - analog audio 2.25" (57 mm) deep, without control panel
Weight
4.4lb (2kg) - 16 x 16
8.8lb (4kg) - 32 x 32
Mounting - EIA 310-C, 19.0" (483 mm)
Grounding terminal - Cooper, accepts 14-6 AWG | | Serial Control | Type - 1 Serial port
Standard - SMPTE 207M, EIA-422, configurable
Connector - 1, DE-9 | | Ethernet | Type - 10/100 Base T
Standard - IEEE 802.3
Protocol - NVISION Ethernet protocol
Connector - 1, RJ-45 | | Environment | Operating temperature - 32 to 104ºF (0 to 40ºC)
Relative humidity - 0 to 90%, non-condensing | | | | AES Audio | Type - Unbalanced digital audio
Standard - AES3id
Sample Rate - Synchronous 48 kHz, Asynchronous 32 to 192 kHz
Connector - BNC
Impedance - 75 ohm
Input level - 200 mV to 3.0 Vp-p
Output level - 1 V ±10% | | Analog Audio | Type - Analog audio Connector - DB-25
Impedance - Input 20 kohm, output 50 ohm, nominal
Frequency response - 20 Hz to 100 kHz, < ±0.5 dB
THD + Noise - <0.005%
SNR - >95 dB relative to +24 dBu (20 Hz to 20 kHz)
Crosstalk - >85 dB worst case
Input CMRR - >75 dB | | Video/Reference | Type - Analog video reference
Standard - PAL, NTSC, or Tri-Level Sync
Connector - Loop-thru, BNC
Impedance - 75 ohm or Hi-Z
Input level - 0.5 Vp-p to 2.0 Vp-p
Input return loss - ≥30 dB to 5 MHz | | SD | Type - Standard definition serial digital video
Standard - SMPTE 259M
Data rate - Auto reclocking at 270 Mbps or auto bypass with pass-through from 19 Mbps to 360 Mbps
Connector - BNC
Impedance - 75 ohm
Cable equalization - 350 m Belden 1694A, 200 m Belden 1855A, or equivalent cable, at 270 Mbps
Router path - non-inverting
Input/output return loss - >15 dB, 5 to 540 MHz
Output level - 800 mVp-p ±10 %
Output rise/fall time - 600 ps +10%
Output overshoot - ≤10% of amplitude max
Output alignment jitter - ≤0.2 UIpp from 1.0 kHz to 27 MHz
Output timing jitter - ≤0.2 UIpp from 10 Hz to 1.0 kHz | | SD & HD | Type - High definition serial digital video
Standard - SMPTE 259M, 344M and 292M
Data rate - Auto reclocking at 270 Mbps and 1.483 and 1.485 Gbps or auto bypass with pass-through from 19 Mbps to 1.5 Gbps
Connector - BNC
Impedance - 75 ohm
Cable equalization - 150 m Belden 1694A, 85m Belden 1855A, or equivalent cable, at 1.5 Gbps
Router path - non-inverting
Output level - 800 mVp-p ±10%
Input/output return loss - >15 dB, 5 MHz to 1.5 GHz
Output rise/fall time - ≤270 ps
Output overshoot - ≤10% of amplitude max
Output alignment jitter - ≤0.2 UIpp from 100 kHz to 150 MHz
Output timing jitter - ≤1.0 UIpp from 10 Hz to 100 kHz | | 3Gbps/HD/SD | Type - High definition serial digital video
Standard - SMPTE 259M-C, 292M and 424M
Data rate - Auto reclocking at 270 Mbps and 1.483, 1.485, 2.967, 2.970 Gbps or auto bypass with pass-through from 19 Mbps to 3.0 Gbps
Connector - BNC Impedance - 75 ohm
Cable equalization (for cables listed or equivalent cable) - 400 m Belden 1694A, 250 m Belden 1855A at 270 Mbps, 150 m Belden 1694A, 100 m Belden 1855A at 1.5 Gbps, 100 m Belden 1694A, 45 m Belden 1855A at 3.0 Gbps
Router path - Non-inverting
Output level - 800 mVp-p ±10%
Input/output return loss - >15 dB, 5 MHz to 1.5 GHz>10 dB, 1.5 GHz to 3.0 GHz
Output rise/fall time - ≤135 ps
Output overshoot ≤10% of amplitude max
Output alignment jitter - ≤0.3 UIpp from 100 kHz to 300 MHz
Output timing jitter - ≤2.0 UIpp from 10 Hz to 100 kHz | | Analog Video | Type - Analog video
Standard - NTSC, PAL
Connector - BNC
Impedance - 75 ohm
Input return loss - >45 dB, DC to 6 MHz
Greater than 30 dB, 6 MHz to 30 MHz
Output return loss - >45 dB, DC to 6 MHz
Greater than4 0 dB, 6 MHz to 30 MHz
Input level - 1 Vp-p, nominal
Output level - 1 Vp-p, nominal
Output DC offset - 0 V ±30 mV relative to backporch
Input range - ±2 V
Insertion loss - 0 dB ±0.1 dB, any input to any output Freq. response - 0 dBr ±0.05 dB, DC to 6 MHz
Differential gain - <0.1% Differential phase - <0.1°
Tilt - <0.1%
Delay scatter - < ±65° at sub-carrier (PAL or NTSC) any input to any output
Noise spectrum - >60 dB test signal; luminance ramp
CMRR - >60 dB at 120 Hz
Crosstalk - >65 dB at sub-carrier frequency
Output to output isolation - >90 dB at sub-carrier frequency DC coupled system | | Port Machine | Type - Bidirectional, dynamically configured
Standard - EIA-422, ANSI/SMPTE 207M
Connector - RJ-45
Data rates - Up to 1 Mbps | | | | Package Weight | 1.55 lb | | Box Dimensions (LxWxH) | 18.8 x 3.6 x 1.4" |
Rating90% users recommend this product to others. And what about you?
This product has already been rated by 56 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Swan Bread maker SWBBA7...
Expert intel sixcore i5-8400 4GHZ turbo...
Color LaserJet Pro MFP M281fdw...
call of duty world war II...
Audio Technica AUDIO-AT8631
data sheet ...
|
| Discussion |
Latest contributions to the discussion:
Query
Name: Geoff Dibblee
Carson zOrb Digital USB Microscope
when useing the zorb it will not cover the whole of a stamp back or front as i am useing it for perfins stamps and whati have recived in the box just covers half a letter please can you help me to find away to enlarg the whole stamp
...
Blown transformer
Name: Dik Schouten
Demeter VTDB-2 Single Channel Tube Direct
Dear Sirs,where can i buy a new transformer for my VTDB 2b? If possible een 230 volt primary site...Y.S. Dik Schouten
...
Battery charger light does not turn yellow or green when charging LP-E17
Name: DAVE
Canon LC-E17 Charger for LP-E17 Battery
I have a new Canon battery charger for EOS R10 Camera. It has lights that turn yellow and green when charging the Canon battery that came with the camera. But when I put in the BM battery LP-E17 no lights come on. I can tell the battery is charged when I put it in the camera, b...
Stiff center dial wheel
Name: Reynolds, Jane
Tasco 10x50 Essentials Porro Binocular
It is very hard for me to turn the center wheel with the ridges on it.
Could you please email me the user manual for the Tasco 10 x 50 mm zip focus? Thank you...
Redfield 2-7x33
Name: Mike
Redfield 2-7x33 Revolution Riflescope
Can the elevation and windage knobs be reset to zero?
Thanks!...
|
|
