User Manual for Mole-Richardson 1200 1800W DayLite Par Pro Kit Click to enlarge the picture
Contents of the user manual for the Mole-Richardson 1200 1800W DayLite Par Pro
- Product category: HMI & Plasma Lights Mole-Richardson
- Brand: Mole-Richardson
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Mole-Richardson HMI & Plasma Lights
|
User manual for the Mole-Richardson 1200 1800W DayLite Par Pro contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Mole-Richardson product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Mole-Richardson user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Mole-Richardson product will considerably shorten its lifespan!
|
Product description Have everything you need and carry it all around in a convenient case with the 1200/1800W DayLite Par Pro Kit from Mole-Richardson. It features the high-output 1200/1800W DayLite PAR HMI fixture and comes with an electronic ballast for operation. Also, it bundles in a 50' head cable and 4-way barndoors along with narrow, medium, wide, extra wide, and frosted fresnel lens assemblies and one single and two double scrims. Additionally, this Pro Kit includes a Chimera Light Bank softbox and speed ring for soft, diffuse lighting and a gaffer pack that features a variety of accessories, like an HMI lamp, leather gloves with mitt clip, an electrical cube-tap, a gel pack, and clothespins in a ditty bag.
The 1200/1800W DayLite Par is designed for Motion Picture, Television, Event and ENG/EFP usage with a cast aluminum construction that features improved ventilation and cooling while the Brytal aluminum parabolic reflector provides 96 square inches of reflective surface. The electronics in the fixture are contained in a low-profile trough that is isolated from the main housing, and feature a swing-out trap door for easy access to the igniter and safety switch. The fixture has visual and tactile focal indicators to determine lamp position and, when used with the interchangeable lenses, the field of light can be fine-tuned for optimum beam control. Other features include a trough skid for operating and safe transportation, a low-profile yoke with a 5/8" baby receiver, a locking, hinged front door for easy lamping, and a "pig-tail" style electrical input. Standard on all fixtures are a stainless steel safety screen, spring loaded fourth accessory clip, and variable accessory clip positions located at either 90° or 45°. This light is also compatible with all existing 10 1/8" accessories. - 50' Head Extension Cable for 7631 Varifocus Par This is a Mole Richardson Head Extension Cable for the 7631 Varifocus Par. It allows operation of the light at an additional 50' from its ballast.
- 4-Leaf Barndoor Set for HMI PAR 1200 This is a 4-Leaf Barndoor Set for the Mole-Richardson 1200W HMI PAR Light. Barndoors narrow the beam spread of a light fixture. They help create a 3-dimensional look to a lighting scheme by placing light in a specific area or by keeping it away.The more leaves a barndoor set has, or the longer the leaves, the more precisely the beam can be controlled.
- Narrow Lens Assembly for HMI 1.2K Par This is a Narrow Lens Assembly for the Mole 6631 HMI 1.2K Par.When this lens is mounted to the light, it provides a beam of light 352 footcandles 8' in diameter from 50' away.
- Medium Lens Assembly for 6631 HMI Par This 10.1" Medium Lens Assembly snaps onto the front of a Mole Richardson 6631 HMI Par Head. When installed, it disperses and diminishes the light output by approximately 10 times.
- Wide Lens Assembly for HMI 1.2K Par This Wide Lens Assembly is one of four assemblies available for use on the Mole Richardson 6631 HMI 1.2K Par Light. It enables the dispersion of the light beam over a wider area, than with a narrow, or very narrow lens assembly. Use this item for larger sets, or when lighting an entire room is desired.
- X-Wide Lens Assembly for HMI 1.2K Par This Extra Wide Lens Assembly is one of four assemblies available for use on the Mole Richardson 6631 HMI 1.2K Par Light. It enables the dispersion of the light beam over a much wider area, than with a wide, narrow, or very narrow lens assembly. Use this item for larger sets, or when lighting an entire room is desired.
- Fresnel Lens Assembly for 1.2K HMI An Intensifier Fresnel Lens for the Mole Richardson 1.2K HMI Par light. Provides control over the spread of the beam, giving it a defined, yet soft edge.
- Full Single Scrim for Mole PAR Fixtures (10 1/8") This is a 10 1/8" Mole-Richardson Full Single Stainless Steel Scrim for the Mole HMI 1.2K PAR light or any other fixture that accepts a 10 1/8" accessory.Full scrims dim the light across the entire beam spread, and 1/2 and graduated scrims are used to even the beam spread when lighting a subject or background from an angle.Keep several densities of scrims available to be prepared for any lighting situation.
- Full Double Scrim for Mole Par Lights (10 1/8") This is a 10 1/8" Full Double Scrim for the Mole-Richardson PAR lights or any other light that accepts a 10 1/8" accessory. Full scrims dim the light across the entire beam spread, and 1/2 and graduated scrims are used to even the beam spread when lighting a subject or background from an angle.Keep several densities of scrims available to be prepared for any lighting situation.
- Video Pro Plus Small Softbox 24 x 32" The Chimera Small Video Pro Plus softbox is designed for use with a hotlight but may also be used with flash. With fabric intended for the heat of a continuous light, the Small Video Pro Plus with silver interior is ideal for work where maximum softening of the light is desired. The "Plus" designation of this softbox means the front face of the softbox is removable. Chimera makes different strengths of diffusion material for front face applications. This softbox comes with three diffuser fronts. These will allow more light transmission and help to make the light more specular, or "less soft." This softbox also has a built in "lip" around the edges to help control light spill. This lip also facilitates the attachment of optional honeycomb grids, fabric grids, and louvers.
- Ideal for 3/4 length shots of adults.
- Recessed front helps to control light spill and facilitates the attachment of an optional fabric grid.
- May be used with hot lights up to 1,000W. Can be used with strobes of any W/s rating.
UPC: 845077081251 - Gaffer Pack for 1,200/1,800W DayLite Par This GafferPack from Mole-Richardson provides a handful of useful accessories for working with the 1,200/1,800W DayLite Par fixture. It includes a CSR1200 HR lamp, gloves with mitt clip, a cube tap, clothespins, a gel pack, and a ditty bag.
In the Box Bundle Items 50' Head Extension Cable for 7631 Varifocus Par acxswqstvyttvtaesrderzducwuxwqurbzq 4-Leaf Barndoor Set for HMI PAR 1200 Narrow Lens Assembly for HMI 1.2K Par Medium Lens Assembly for 6631 HMI Par Wide Lens Assembly for HMI 1.2K Par X-Wide Lens Assembly for HMI 1.2K Par Fresnel Lens Assembly for 1.2K HMI Full Single Scrim for Mole PAR Fixtures (10 1/8") 2 x Full Double Scrim for Mole Par Lights (10 1/8") Video Pro Plus Small Softbox 24 x 32" - Black Storage Bag for Softbox, Diffusion Screen and Poles
- Full f/stop Front Diffusion Cloth, 1/2 Grid, & 1/4 Grid Cloth
Gaffer Pack for 1,200/1,800W DayLite Par
Also Includes - 1.2/1.8kW DayLite Par Light
- 575W/1200W/1800W HMI Ballast
- Kit Case
- Chimera Speed Ring
Table of Contents
|
Upload User Manual
Have you got an user manual for the Mole-Richardson 1200 1800W DayLite Par Pro Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - X-Wide Lens Assembly for HMI 1.2K Par
| | | Box Dimensions (LxWxH) | 14.5 x 14.2 x 8.9" | - Fresnel Lens Assembly for 1.2K HMI
| | | Box Dimensions (LxWxH) | 12.25 x 12.25 x 4.45" | - Full Single Scrim for Mole PAR Fixtures (10 1/8")
| | | Box Dimensions (LxWxH) | 10.9 x 10.3 x 0.7" | - Full Double Scrim for Mole Par Lights (10 1/8")
| | | Box Dimensions (LxWxH) | 10.0 x 10.0 x 1.0" | - Video Pro Plus Small Softbox 24 x 32"
| Size | 24 x 32" (60 x 80 cm) | | Shape | Rectangle | | Compatibility | Hot Lights up to 1000 Watts
Flash of any w/s rating | | Removable Face | Yes | | Removable Baffle | Yes | | Accepts Grids | Yes | | Requires Speed Ring | Yes | | | | Box Dimensions (LxWxH) | 28.5 x 4.4 x 4.3" | - 50' Head Extension Cable for 7631 Varifocus Par
- 4-Leaf Barndoor Set for HMI PAR 1200
- Narrow Lens Assembly for HMI 1.2K Par
- Medium Lens Assembly for 6631 HMI Par
- Wide Lens Assembly for HMI 1.2K Par
- Gaffer Pack for 1,200/1,800W DayLite Par
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 02 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
