|
User Manual for myMix Mix Pack 4 Click to enlarge the picture
Contents of the user manual for the myMix Mix Pack 4
- Product category: Networked Audio Systems myMix
- Brand: myMix
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for myMix Networked Audio Systems
|
User manual for the myMix Mix Pack 4 contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any myMix product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official myMix user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a myMix product will considerably shorten its lifespan!
|
Product description The Mix Pack 4 from myMix contains tools to provide individual stereo mixes and multi-track recording for four musicians. Four myMix units provide eight inputs to connect and label microphone (phantom power available) and line level sources. All devices get connected with a CAT5 cable (not included) to the TPE-S80 POE switch. To share the input signals with a console, the signal from DI-boxes can be split for line level and use y-cable (or a mic split box) for microphones. If more than four people are on stage, you can use a 4-channel headphone amplifier and share a mix. The TPE-S80 provides power for 8 myMix units, so four myMixes or a combination of three myMixes and an IEX16 input expander can be added to have more individual mixes and more audio channels available. - Personal Monitor Mixing & Multitrack Recording System The myMix Personal Monitor Mixing & Multitrack Recording System is a networked personal monitor mixing system that allows each user to create an individual local mix. The system is networked using standard Fast Ethernet (100Mb/s) switches. Each unit has 2 local inputs for microphone or line signals and a stereo master output..
The mixer unit is automatically detected on the network with its name and respective input channel. It can select individual audio channels from the network and mix up to 16 channels, which can be altered in volume, tone, panorama, solo, and mute.
Internal effects (6 reverb presets) can be added to each input signal. The stereo output signal can be sent to the network and is available on the balanced 1/4" jacks and on a 3.5mm headphone jack. A 4-band fully parametric EQ is available for the output signal. All settings of the mixer are automatically stored in profiles. Users can record the local mix as well as the individual network signals in multi-track as time stamped 24-bit WAV files on an optional SD/SDHC card. Sessions can be played back and remixed. Play Along allows mixing local inputs and tracks from the SD card.
This mixer unit is powered by the external PSU (power supply unit) or via POE (15W). The included imic stand adapter allows for easy mounting to the standard microphone stands. - Individual stereo mixes for each musician with up to 16 channels of audio
- Recording on 16 plus 2 channels, mixing on up to 16 channels, and playback on 16 channels
- Individual channel selection from the network
- Intuitive interface with full color LCD display
- Networked via standard or PoE Fast Ethernet switches
- Dual mic/line inputs with 48V phantom power
- Separate headphone and stereo line outputs
- Mounts easily to microphone stands with the included adapter
- Can be remotely controlled with the optional myMix CONTROL software
- TPE-S80 8 Port 10/100Mbps PoE Switch The TPE-S80 8 Port 10/100Mbps PoE Switch from TrendNet allows for easy convenient network configuration. You can take advantage of a variety of features that make this switch easy to setup and manage. Initially, the Plug and Play functionality gets you going with minimal setup needed. Once plugged in you can then take advantage of the Power over Ethernet capabilities of this switch. Power over Ethernet, or PoE, enables you to run power through the Ethernet cabling to compatible devices, eliminating the need for additional power sources.
The full duplex ports found on this switch enable consistent data transfer. Full duplex ports allow for simultaneous data transfer not only increasing data speeds but efficiency as data no longer has to wait to be transferred. The TrendNet switch gives you more ports, thus allowing for more connections. With an enhanced switching capacity you have the expanded ability to transfer more data faster.
With integrated LED indicators you no longer need to delve into the configuration settings of the switch to display its various aspects. The on-off switch allows for increased power efficiency, making it simple to turn off the switch when not in use. If you have non PoE devices connected to the switch, the switch automatically recognizes them, cutting the power to those devices to conserve power. - Power Over Ethernet
- Power over Ethernet or PoE technology describes a system to pass electrical power safely, along with data, over Ethernet cabling. The TrendNet PoE switch allows for Power Over Ethernet capability which in turn helps to reduce equipment cost by delivering data and power over existing network cables. By providing power over Ethernet cabling you now have the ability to utilize various components such as IP security cameras, network routers, network webcams, wireless access points, remote point of sale kiosks and a variety of devices compatible with power over Ethernet.
- 10/100Mbps Full Duplex PoE Ports
- The 10/100Mbps full duplex PoE ports found on the TrendNet Switch work by making simultaneous use of two physical pairs of twisted cable inside the jacket, wherein one pair is used for receiving packets while the other is used for sending packets. This effectively makes the cable itself a collision-free environment and doubles the maximum data capacity that can be supported by the connection. Some of the benefits of utilizing a full duplex configuration include increased efficiency, availability of full data capacity in both directions, and the eliminated need for nodes having to wait until others complete their transmission.
- Plug and Play
- Plug and play is a term used to describe the characteristics of a variety of computer devices and peripherals. The TrendNet Switch can be referred to as a plug and play device as there is minimal configuration necessary to get the device up and running.
- Diagnostic LEDs
- With diagnostic LEDs you have the ability to see the status of the network. With LEDs displaying power, link/activity, and PoE/status you no longer have to dig into the configuration settings of the switch to see just how well the switch is performing.
In the Box Bundle Items 4 x Personal Monitor Mixing & Multitrack Recording System czcratuwecuev - Power Supply Unit (24V, 12W)
TPE-S80 8 Port 10/100Mbps PoE Switch - Multi-Language Quick Installation Guide
Table of Contents
|
Upload User Manual
Have you got an user manual for the myMix Mix Pack 4 in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Personal Monitor Mixing & Multitrack Recording System
| | | Impedance | 2 kΩ / 20 kΩ (microphone / line) | | Gain | Input: Variable from +4 to +60 dB (microphone), Variable from -16 to +40 dB (line) | | Input Level | +14 dBu / +34 dBu (microphone / line) maximum | | Frequency Response | 20 Hz to 20 kHz (+0 dB, -1 dB) | | | | Impedance | 75 Ω balanced / to drive >16 Ω (line / headphone outputs) | | Output Level | Maximum: +21 dBu (line) | | Signal to Noise Ratio | >104 dB | | THD + N | <0.022% (microphone input to line out) | | Crosstalk | <-80 dB (L to R) | | Mute | >100 dB | | Network Type | Fast Ethernet 100 Mb/s | | Network Cable Type | CAT5 | | Latency | <1 ms (network) | | Conversion | 24-bit (AD/DA) | | Recording Media | SD or SDHC card | | Recording Format | WAV file, 24-bit, 48 kHz sampling rate | | Inputs | Microphone: Balanced XLR (1 gnd, 2 pos, 3 neg)
Line: Balanced 1/4" jack (tip pos, ring neg, sleeve gnd) | | Outputs | Line: Balanced 1/4" jack (tip pos, ring neg, sleeve gnd)
Headphone: 3.5 mm stereo jack | | LAN Port | RJ45 | | Dimensions (W x H x D) | 5.3 x 6.7 x 2.4" (134 x 171 x 60 mm) (excluding mic stand adapter) | | Weight | 1.1 lb (0.5 kg) (excluding mic stand adapter) | - TPE-S80 8 Port 10/100Mbps PoE Switch
| | | Standards | IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3af Power over Ethernet
IEEE 802.3x Flow Control | | Ports | 8 x 10/100Mbps Auto-MDIX PoE Ports | | Power Switch | On/Off power switch | | Speed | Ethernet: 10/20Mbps (half/full duplex)
Fast Ethernet: 100/200Mbps (half/full duplex) | | Data Buffer | 512Kbits | | MAC Address Table Size | 1K MAC entries | | Switching Method | 1.6Gbps Switching Fabric | | Power Over Ethernet | Up to 15.4 watts per port; PD classification
Polymer switch for short protection
PoE: pin 3,6 for power+ and pin 1,2 for power- | | VLANs | None | | Management | None | | | | Form Factor | Desktop | | Diagnostic LEDs | Power, Link/Activity, PoE Act/Status | | Environmental Requirements | Operating Temperature: 32-113°F (0-45°C)
Storage Temperature: 14-158°F (-10-70°C)
Humidity: 10-95% (non-condensing) | | Power Requirements | 100~240VAC 50/60Hz, internal universal switching power | | Power Consumption | 6 Watts max. (no Power Device (PD) connected)
132 Watts max. (8 x 15.4 watts PoE devices connected) | | Certifications | CE, FCC | | Dimensions (WxHxD) | 10.5 x 1.73 x 6.3" / 266 x 44 x 160 mm | | Weight | 3.1 lb / 1.4 kg | | | | Box Dimensions (LxWxH) | 12.0 x 9.8 x 2.9" |
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 27 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Honeywell Home Doorbell 916.8 MHz Product Ref: 3231665-002 Rev B...
Go Pro FETCH Dog Harness ADOGM-001...
Trijacon ACOG USMC scope...
Pyle Pro BTA 62BT 6-Zone Stereo Receiver Bluetooth...
LG Gram 17 Laptop...
|
| Discussion |
Latest contributions to the discussion:
lithium ion battery pack EN-EL5 3.7 V 1100mAh
Name: Jane Holland
Nikon EN-EL5 Lithium-Ion Battery
HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland
...
lithium ion battery pack EN-EL5 3.7 V 1100mAh
Name: Jane Holland
Nikon EN-EL5 Lithium-Ion Battery
HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland...
Settings access and setup
Name: Edwin Derks
Nuance PaperPort 14
I had a problem with Paperport loading. Through the remote efforts of a Tech was able to get back online, however, "settings" are only listed 1 - 5 with no action listed as was 'visibly' available, (i.e. Scan both sides, Black and White, Color, etc.)
1. how to change, 2. wha...
query
Name: Vudayagiri Balasubramanyam
Bose Wave SoundTouch Music System IV
how to set up my bose radio with my remote working-class ...
Hi. I didn’t even get a chance to try it once! :( plz help
Name: Eric Tasakovic
Keeley Dark Side Pedal
I ordered a dark side pedal second hand online for 20 bucks cheaper than it would have been to buy it new….20 measly bucks. Anyway…it didn’t come with a power supply. I messed up and accidentally plugged in a 9v ac output power supply in, instead of the required 9v dc. I’...
|
|
