User Manual for Nikon SB-5000 AF Speedlight Two Flash Wireless Portrait Kit Click to enlarge the picture
Contents of the user manual for the Nikon SB-5000 AF Speedlight Two Flash
- Product category: On Camera Flashes Nikon
- Brand: Nikon
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Nikon On Camera Flashes
|
User manual for the Nikon SB-5000 AF Speedlight Two Flash contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Nikon product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Nikon user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Nikon product will considerably shorten its lifespan!
|
Product description A Guide to On-Camera Flash Read More Completely embrace radio-controlled wireless lighting with your D5 or D500 DSLR by picking up this Nikon SB-5000 AF Speedlight Two Flash Wireless Portrait Kit from B&H. The essential components of the kit are the pair of SB-5000 speedlights along with the WR-A10 Wireless Remote Adapter and the WR-R10 Wireless Remote Controller, which provide shooters with the main items for creating a wireless two-light setup with their D5 or D500 DSLR. Alongside these tools is a selection of accessories that will allow for additional control over the light in order to create flattering portraits, including two 32" convertible umbrellas, two umbrella brackets and adjustable cold shoes, two light stands, an eight-bay rapid charger, sixteen AA NiMH rechargeable batteries, and two AA battery cases to hold the extra batteries that are not actively being used. - 2 x Nikon SB-5000 AF Speedlight Nikon has reimagined both on- and off-camera lighting with the SB-5000 AF Speedlight, which brings revolutionary radio control to the Creative Lighting System with Advanced Wireless Lighting and comes equipped with a world's first shoe-mounted flash cooling system that enables up to 100 consecutive full-power flashes. These features alone are enough to put it at the top of the speedlight heap, but the SB-5000 doesn't rest and provides a powerful guide number of 113' at ISO 100 and 35mm while also shrinking in overall size compared to its predecessors.
Of course, the SB-5000 AF Speedlight is fully compatible with Nikon's i-TTL automatic exposure system found in a majority of their cameras for fast, accurate operation. The radio control implemented in the SB-5000 requires a compatible DSLR using the WR-A10 Wireless Remote Adapter and WR-R10 Wireless Remote Controller in order to fully realize the power of the system. This enables the camera and flash to wirelessly control up to six groups of flashes from up to 98' away, without requiring any line of sight. Also, the SB-5000 and the radio system are fully compatible with the existing optical triggering method of older units and can even be mixed and matched for maximum versatility.
Designed for reliability as well as versatility, the innovative built-in cooling system of the SB-5000 is a first for shoe-mounted flashes. It vents heat quickly and efficiently, allowing you to fire up to 100 consecutive full power flashes without issue. It also means that the flash can be made smaller without compromising performance. This new design also ensures speedy and intuitive operation, implementing an Info button for fast access to some of your most commonly used settings.
As a standard flash the SB-5000 will not disappoint, providing a wide ranging zoom head of 24-200mm which can be extended down to 14mm with use of the built-in diffusion panel. The head will also tilt from -7 to +90° and rotate left and right 180° for complete bounce capabilities. Full sync mode support is available with slow, high-speed, 1st and 2nd curtain options.
The flash has a quick recycle time of 1.8-2.6 seconds and runs on four AA batteries. It can be powered by select external battery packs. A PC terminal can be found on the SB-5000 for further triggering options and it comes with a stand, diffusion dome, fluorescent and incandescent filters, and a soft case. - Radio control Advanced Wireless Lighting when used with a D5 or D500 DSLR equipped with WR-R10 Wireless Remote Controller and WR-A10 Wireless Remote Adapter
- Radio triggering range of 98' with no line-of-sight requirement and with control over 6 groups of flashes
- Shoe-mount flash cooling system with a heat-shedding design enables over 100 bursts at full output without overheating
- Guide number of 113' at ISO 100 and 35mm or 180' at ISO 100 and 200mm
- Coverage of 14-24mm in FX when using built-in wide-angle diffusion panel
- Manual power output from 1/1 to 1/256
- Light distribution angle is automatically adjustable to the camera's image area in both FX and DX formats with standard, even, and center-weighted options
- Wireless Commander TTL capabilities with both optical and radio trigger options
- Commander Mode to set up optical wireless flashes in 3 groups and in one of 4 channels
- Control and mix optical and radio flashes
- Customize settings with Unified Flash Control and a personal computer with version 2.23 or later of Nikon's Camera Control Pro 2 software installed
- Flash head tilts with click-stops at -7°, 0°, 45 °, 60°, 75°, and 90°
- Flash head rotates left and right with click-stops at 0°, 30°, 60°, 75°, 90°, 120°, 150°, and 180°
- Flash exposure compensation from -3 to +3 EV in 1/3 EV steps
- Info button for fast access to commonly adjusted settings
- Works with SK-6 Power Bracket Unit and SD-9 High-Performance Battery Pack
- Flash-ready indicator lights
- Flash duration of 1/980 to 1/30,820 second depending on output setting
- AF-assist light, modeling illuminator, monitor pre-flashes, and test firing settings
- Automatic color filter detection for adjusting the camera's color temperature settings
- Firmware can be updated through camera
UPC: 018208048151 - Nikon WR-A10 Wireless Remote Adapter Create an advanced wireless camera system with your Nikon DSLRs and Speedlights by picking up the WR-A10 Wireless Remote Adapter. This unit connects to select DSLRs with a 10-pin connector and allows users to use the WR-R10 Wireless Remote Controller, which functions as a transceiver to wirelessly trigger the shutter release or to control radio-capable Speedlights such as the SB-5000. When paired with the WR-R10 on select DSLRs users can operate one camera as a master to trigger multiple connected cameras at once from up to 164' away.
This system is compatible with the WR-1 and WR-T10 Wireless Remote Controllers for remote operation of all the cameras in the system. Also, three radio frequency channels are available to limit interference with other systems in the same location. - One optional WR-T10 Wireless Remote Controller can be paired with an unlimited number of cameras with an optional WR-R10 Wireless Remote Controller attached.
- When used with the WR-R10 and connected to select Nikon cameras with a 10-pin connector, users can designate one camera as a master and control the shutter release of up to 64 WR-R10 units.
- Range from a WR-R10 set as a master to other WR-R10 units is 164'.
- When controlling Speedlights, up to 18 radio-capable units can be paired to a camera from a range of up to 98'.
- Two link modes are available: PIN, which is designed for professional workflows, and Pairing for a simple connection.
- Three radio frequency channels (5, 10, and 15) are available to prevent and limit interference with multiple pairings or other systems.
- Can be used for triggering the shutter remotely when using slow shutter speeds to prevent camera movement.
- Compatibility
- Cameras: D5, D500, D850, D810A, D810, D4S, D800E, D800, D4, D3S, D3, D700, D3X, D300, D300S, D200, D2Xs, D2Hs
Speedlights: SB-5000
For full compatibility and support for the latest DSLRs and Speedlights, users may be required to send their WR-A10 Wireless Remote Adapter to Nikon for a free factory-installed firmware update. UPC: 018208271030 - Nikon WR-R10 Wireless Remote Controller Create an advanced wireless system with your Nikon cameras and Speedlights by picking up the WR-R10 Wireless Remote Controller. This transceiver unit connects to select cameras with an accessory port and allows users to wirelessly trigger the shutter release or to control radio-capable Speedlights such as the SB-5000. When paired with the WR-A10 on select DSLRs with the 10-pin connector, users can operate one camera as a master to trigger multiple connected cameras at once from up to 164' away.
This system is compatible with the WR-1 and WR-T10 Wireless Remote Controllers for remote operation of all the cameras in the system. Also, three radio frequency channels are available to limit interference with other systems in the same location. - One optional WR-T10 Wireless Remote Controller can be paired with an unlimited number of cameras with a WR-R10 Wireless Remote Controller attached.
- When used with the optional WR-A10 Wireless Remote Adapter and connected to select Nikon cameras with a 10-pin connector, users can designate one camera as a master and control the shutter release of up to 64 WR-R10 units.
- Range from a WR-R10 set as a master to other WR-R10 units is 164'.
- When controlling Speedlights, up to 18 radio-capable units can be paired to a camera from a range of up to 98'.
- Two link modes are available: PIN, which is designed for professional workflows, and Pairing for a simple connection.
- Three radio frequency channels (5, 10, and 15) are available to prevent and limit interference with multiple pairings or other systems.
- Live View can be used with the following cameras: D5, D4S, D810, D800, D800E, D750, D610, D600, D500, D7200, D7100, D5500, D5300, and D5200.
- Can be used for triggering the shutter remotely when using slow shutter speeds to prevent camera movement.
- Compatibility
- DSLRs: D5, D4S, D4, D3S, D3X, D3, D2X, D2Xs, D2Hs, D850, D810A, D810, D800, D800E, D750, D700, D610, D600, D500, D300S, D300, D200, D7200, D7100, D7000, D5500, D5300, D5200, D5100, D5000, D3300, D3200, D3100, D90, Df
COOLPIX: P7800, A
Speedlights: SB-5000 - Currently, only the D5, D850, and D500 DSLRs can be used with the WR-10 system to wirelessly control radio-capable Speedlights.
- For full compatibility and support for the latest DSLRs and Speedlights, users may be required to send their WR-A10 Wireless Remote Adapter to Nikon for a free factory-installed firmware update.
UPC: 018208271054 - Watson 8-Bay Rapid Charger for AA / AAA NiMH or NiCd Rechargeable Batteries The Watson 8-Bay Rapid Charger for AA / AAA NiMH or NiCd Rechargeable Batteries charges up to 8 AA or AAA size nickel-metal hydride or nickel-cadmium rechargeable batteries. Charging time ranges from 3.6-4.6 hr for AA batteries, and 1.6-2 hr for AAA's. Eight individual LCD indicators give the charging status for each battery. Patented technology permits the charging of different sizes and types of battery simultaneously--charge a AA with a AAA, or an NiMH with an NiCd.
The charger's intelligent microprocessor doles out the full charge to each battery while preventing overcharging, thanks to Delta Voltage Protection. The Safety Timer with Automatic Timer Shut-Off senses when batteries are fully charged and ceases charging. Automatic Charge Current Selection automatically chooses the optimal current for the batteries you're charging. Reverse Polarity Protection and Alkaline and Bad Battery Protection safeguard the charger and your batteries against damage when batteries are installed improperly. There's also a discharge function, allowing you to refresh the batteries prior to charging.
The charger features an icon that shifts up and down during discharging, and stops shifting when discharge is complete. This icon also displays battery capacity while charging. The full-battery icon lights up when the batteries are fully charged. A flashing full-battery icon indicates an abnormality, such as the presence of a bad or alkaline battery, and at this point the charger will cease its operation. The charger is powered by an included external AC adapter with switching 100-240V power for worldwide use, or by the 12-24V DC cord which can plug into your car's cigarette lighter for charging on-the-go. - Charges up to 8 AA or AAA size nickel-metal hydride or nickel-cadmium rechargeable batteries.
- Charging time ranges from 3.6-4.6 hr for AA batteries, and 1.6-2 hr for AAA's.
- Eight individual LCD indicators give the charging status for each battery.
- Patented technology permits the charging of different sizes and types of battery simultaneously--charge a AA with a AAA, or an NiMH with an NiCd.
- Intelligent microprocessor doles out the full charge to each battery while preventing overcharging, thanks to Delta Voltage Protection. The Safety Timer with Automatic Timer Shut-Off senses when batteries are fully charged and ceases charging.
- Automatic Charge Current Selection automatically chooses the optimal current for the batteries you're charging.
- Reverse Polarity Protection and Alkaline and Bad Battery Protection safeguard the charger and your batteries against damage when batteries are installed improperly.
- There's also a discharge function, allowing you to refresh the batteries prior to charging.
- Has an icon that shifts up and down during discharging, and stops shifting when discharge is complete. This icon also displays battery capacity while charging. The full-battery icon lights up when the batteries are fully charged. A flashing full-battery icon indicates an abnormality, such as the presence of a bad or alkaline battery, and at this point the charger will cease its operation.
- Powered by an included external AC adapter with switching 100-240V power for worldwide use, or by the 12-24V DC cord which can plug into your car's cigarette lighter for charging on-the-go.
UPC: 847628532922 - 2 x Watson AA NiMH Rechargeable Batteries (2300mAh) - 8-Pack This 8-pack of 2300mAh Watson AA NiMH Rechargeable Batteries is a package of 8 AA size nickel-metal hydride (NiMH) rechargeable batteries. Each has a voltage of 1.2V and a capacity of 2300mAh. These batteries feature excellent high-drain performance and can be recharged up to 1000 times. Additionally, they are mercury-free and environmentally friendly. UPC: 847628532465
- 2 x Watson Case for 4 AA or AAA Batteries (Blue) This plastic Watson Battery Storage Case holds up to 4 AA or AAA batteries in dedicated slots. It has a compact form factor for easy storage in your pocket or a small compartment in your gear bag. The case has a snap closure and features an attachment point for connecting a second identical case, which could in turn be connected to another to create a chain, giving you an easy expansion option for storing more batteries. UPC: 847628581913
- 2 x Vello Universal Accessory Shoe Mount The Universal Accessory Shoe Mount from Vello is a convenient and adjustable cold-shoe mount. Small and useful - this shoe provides a secure mounting option for virtually any type of shoe-mounted device - radio slaves, speedlights, light meters, etc. Belying its true capabilities, this seemingly innocuous accessory part will lie harmlessly at the bottom of your gear bag, or in the corner of a parts box. It won't take up much room, nor will it weigh you down. Remaining nearly invisible amongst a cornucopia of accumulated photographic gadgetry, this clever shoe is just waiting for an opportunity to spring into action and save the day. By providing a simple yet effective mounting solution in the blink of an eye - this pint-sized gizmo is worth its weight in gold. Constructed from durable aluminum bar-stock, and finished with a discreet semi-matte black anodized coating - the Universal Shoe Mount is a reliable covert interface between your shoe-mounted device and the intended mounting platform. The bottom plate is machined flat with a relief cut to ensure strength and a secure fit to almost any flat surface. The mounting hole features the ubiquitous 1/4"-20 thread that's so commonly and conveniently found on photographic equipment. An oversized knurled plastic knob that can be visualized with ease in less than ideal lighting conditions graces the side of this fine mounting solution - turning it adjusts the spring-tensioned side-piece to accommodate various sized shoes and mounts.
- Standard 1/4"-20 mounting thread
- Accepts a variety of shoe-mounted accessories
- Spring-tensioned adjustment allows one-handed use
- Durable extruded aluminum alloy construction with discreet anodized finish
- Attaches quickly and easily to flash brackets, tripods, light stands, super-clamps, etc
UPC: 847628028890 - 2 x Impact 32" Convertible Umbrella This is an Impact 32" white satin umbrella with removable black backing. Umbrellas soften, broaden, and diminish the light output of any flash light source. Umbrellas with a white interior will soften and weaken light more than an umbrella with a silver lining. A white umbrella without a black backing may also be used as a makeshift softbox, although the use of the light will not be as efficient as with a softbox.Choosing umbrella size is determined by the size of the subject, and the strength of the light supply being used. Choosing an umbrella surface is as subjective as choosing a paint and brush.This size is perfect for a 1 - 2 person head shot, or a 2x3 ft product setup.
- Backing may be removed half way, providing a unique combination of light bounced from different surfaces.
UPC: 847628013247 - 2 x Impact Umbrella Bracket The Impact Shoe Mount Umbrella Bracket is a versatile bracket that will fit on almost any light stand. It includes two removable, reversible studs to adapt to light stands with top studs smaller than the standard 5/8". This bracket tilts and swivels to make aiming the light or flash easy. It also includes a cold shoe mount, which will accept virtually any shoe-mount flash unit (except Minolta/Sony). Note: Not compatible with Nikon SB-900, SB-910, or Canon 600EX-RT. As an alternative, please see Impact #9101880.
- Two Removable Studs
- The provided studs can be removed from the interior of the bracket by totally loosening the wing knobs and letting them slide out. These studs can be used to mount the bracket to a 1/4"-20 (standard) and 3/8" threaded stand or tripod tops. One stud is used for the flash shoe. The shoe may be unscrewed from this stud.
- Top Swivel Section
- Identified by the small round umbrella socket and locking knob
- Bottom Section
- Contains the locking swivel lever
- Vertical Or Horizontal Use
- Once the stud is removed, the bracket may be mounted vertically, or horizontally out from the top of almost any stand with a 5/8" (Baby) top.
UPC: 847628010819 - 2 x Impact Air-Cushioned Light Stand (Black, 8') This aluminum Impact Air-Cushioned Light Stand rises to a height of 8' and folds down to 29.6". The stand has sure-twist section locks and 4 sections and will support up to 8 lb. If you forget to tighten any section with your light mounted, the light slowly descends, thanks to the air-cushioned action. This useful feature saves equipment and fingers from harm during busy photo sessions.
- Air Cushioned
- Protects equipment from impact damage.
- Compact Design
- Will fit easily into most location cases.
- Accepts Casters
-
- Eases positioning of heavy lights.
- Available as accessories.
UPC: 847628012349 In the Box - 2 x SB-5000 AF Speedlight vtsrrywfxuwus
- SW-15H Diffusion Dome for SB-5000 Speedlight
- AS-22 Speedlight Stand for SB-700 (Replacement)
- SZ-4FL Fluorescent Filter
- SZ-4TN Incandescent Filter for SB-5000 AF Speedlight
- SS-5000 Soft Case for SB-5000 AF Speedlight
- Limited 1-Year Warranty
- WR-A10 Wireless Remote Adapter
- WR-R10 Wireless Remote Controller
- Watson - 8-Bay Rapid Charger for AA / AAA NiMH or NiCd Rechargeable Batteries
- 2 x Watson - AA NiMH Rechargeable Batteries (2300mAh) - 8-Pack
- 2 x Watson - Case for 4 AA or AAA Batteries (Blue)
- 2 x Vello - Universal Accessory Shoe Mount
- 2 x Impact - Convertible Umbrella - White Satin with Removable Black Backing - 32"
- 2 x Impact - Umbrella Bracket
- 2 x Impact - Air-Cushioned Light Stand (Black, 8')
Table of Contents
|
Upload User Manual
Have you got an user manual for the Nikon SB-5000 AF Speedlight Two Flash Wireless Portrait Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - 2 x Nikon SB-5000 AF Speedlight
| Mount | Shoe | | Guide No. | 113.19' / 34.5 m ISO 100 at 35 mm Position
180.45' / 55 m ISO 100 at 200 mm Position | | Exposure Control | Manual, i-TTL | | Angle of Coverage | 84° - 12°
Wide-Angle Adapter: 114° - 84° | | Vari-Power | 1/1 to 1/256 | | Bounce Head | -7 to +90° | | Swivel Head | 360° | | Coverage | 14 - 200 mm (Full Frame) | | Zoom Head | Full Frame: 24 - 200 mm | | Off-Camera Terminal | PC | | Recycle Time | Approximately 1.8 to 2.6 Seconds | | Flash Duration | 1/980 to 1/30820 sec | | Flash-Ready Indicator | Yes | | Compensation | -3 EV to +3 EV (in 1/3 EV steps) | | Wireless Operation | Method: RF
Distance: Up to 98.43' / 30 m
Mode: Commander, Slave
Method: Optical Pulse
Distance: Up to 32.81' / 10 m
Mode: Commander, Slave | | Wireless Communication Channels | 4 Channels | | Wireless Groups | 6 Groups | | Power Source | 4 x AA Alkaline, Rechargeable NiMH Batteries | | Dimensions (W x H x D) | 2.9 x 5.4 x 4.1" / 73.0 x 137.0 x 103.5 mm | | Weight | 14.81 oz / 420 g | | | | Box Dimensions (LxWxH) | 10.5 x 4.6 x 4.6" | - Nikon WR-A10 Wireless Remote Adapter
| Range | From WR-T10: 66' / 20 m
With WR-R10 to Speedlight: 98' / 30 m
With WR-R10 (Master) to WR-R10: 164' / 50 m | | Channels | 3 (5/10/15) | | Connector | Nikon 10-pin (male)
Proprietary accessory port (female) | | | | Box Dimensions (LxWxH) | 4.4 x 3.9 x 2.7" | - Nikon WR-R10 Wireless Remote Controller
| Release Type | Wireless: RF (Radio Frequency) | | Channels | 3 | | Interval Timer/Programmable | No | | Mobile Device/App-enabled | No | | Wireless Range | 164'; / 50 m | | | | Box Dimensions (LxWxH) | 4.5 x 3.9 x 2.8" | - Watson 8-Bay Rapid Charger for AA / AAA NiMH or NiCd Rechargeable Batteries
| | | AC Input Power | 100 to 240 VAC, 50 / 60 Hz | | Charging Bays | 8 x AA, AAA | | Supported Battery Chemistry | Ni-Cd, Ni-MH | | Charging Voltage | 1.5 VDC | | Charging Amperage | 250 to 500 mA | | DC Input Power | 12 VDC at 1300 mA | | Charger Dimensions | 7.8 x 3.1 x 1.2" / 198.00 x 79.00 x 31.00 mm | | Charger Weight | 4.2 oz / 120 g | | | | Certifications | ETL, RoHS, as per Manufacturer | | | | Box Dimensions (LxWxH) | 7.9 x 6.0 x 3.4" | - 2 x Watson AA NiMH Rechargeable Batteries (2300mAh) - 8-Pack
| | | Battery Type | 8 x AA | | Battery Chemistry | NiMH | | Battery Voltage | 1.2 V | | Capacity (mAh) | 2300 mAh | | Maximum Recharge Cycles | 1000 | | | | Box Dimensions (LxWxH) | 7.7 x 4.0 x 1.0" | - 2 x Watson Case for 4 AA or AAA Batteries (Blue)
| Battery Type | 4 x AA, AAA | | Material | Plastic | | Closure Type | Snap Fastener | | Dimensions (W x H x D) | 2.5 x 2.0 x 0.5" / 6.3 x 5.1 x 1.3 cm | | Weight | 0.4 oz / 11 g | | | | Box Dimensions (LxWxH) | 3.0 x 2.5 x 0.5" | - 2 x Vello Universal Accessory Shoe Mount
| Construction | Anodized aluminum alloy | | Color | semi-matte black | | Mounting Thread | 1/4"-20 | | Adjustment Range | 0.75" - 1.1875" (19.1 - 30.2 mm) | | Dimensions | Bottom plate: 1.125 x 0.75" (28.6 x 19.1 mm) Height: 0.625" (15.9 mm) Minimum width including adjustment screw: 1.75" (44.5 mm) Maximum width including adjustment screw: 2.0" (51.0 mm) | | | | Box Dimensions (LxWxH) | 2.0 x 1.3 x 0.1" | - 2 x Impact 32" Convertible Umbrella
| Size | 32.0" / 81.3 cm | | Interior | White | | Exterior | Black | | Shaft Diameter | 8 mm | | Folded Size | L: 23.0" / L: 58.4 cm | | | | Box Dimensions (LxWxH) | 24.0 x 2.1 x 0.2" | - 2 x Impact Umbrella Bracket
| | | Box Dimensions (LxWxH) | 8.45 x 5.95 x 2.7" | - 2 x Impact Air-Cushioned Light Stand (Black, 8')
| Maximum Load | 8 lb (3.6 kg) | | Leg Tip | 20 mm | | Attachment Size | 5/8" Stud with 1/4"-20 in threaded tip | | Accepts Wheels | Yes | | Air Cushioned | Yes | | Maximum Height | 96" (243.8 cm) | | Minimum Height | 34" (86.3 cm) | | Folded Height | 29.6 (75.2 cm) | | Footprint Diameter | 36" (91.4 cm) | | Weight | 2.05 lb (1 kg) | | | | Box Dimensions (LxWxH) | 29.75 x 3.2 x 3.15" |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 84 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
