|
User Manual for Numark PT01 Scratch - Portable Turntable Kit with Wireless Mixfader, Dock, and Case Click to enlarge the picture
Contents of the user manual for the Numark PT01 Scratch - Portable Turntable
- Product category: Turntables Numark
- Brand: Numark
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Numark Turntables
|
User manual for the Numark PT01 Scratch - Portable Turntable contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Numark product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Numark user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Numark product will considerably shorten its lifespan!
|
Product description This B&H Kit combines the Numark PT01 Scratch Portable Turntable with the Mixfader - Portable Bluetooth Wireless Fader, a dock, and a protective case to create the ultimate portable scratch turntable for touring DJs and impromptu performances. - Numark PT01 Scratch - Portable Turntable with DJ Scratch Switch
- PT01 Scratch Review with Swiftstyle
The Numark PT01 Scratch is a durable portable turntable designed for the turntablist on the go. The deck can be used to complement any portable PA system, to listen as a standalone, or for impromptu performing. The PT01 Scratch is a compact AC- or battery-powered turntable with an accurate belt-drive motor. The integrated scratch switch allows any turntablist to perform anywhere. The switch can be adjusted for left or right handed use and is user replaceable. The USB output provides a direct connection to computers for archiving vinyl. A built-in speaker enables monitoring right from the turntable and line-level RCA output connections, which allow the PT01 Scratch to be connected into any line-level input.Line-level output eliminates the need for an amplifier with a phono input and is useful for direct connection to CD recorders, soundcards in computers, etc. Additional outputs include 1/4" headphone and 1/8" mini headphone outputs. The PT01 Scratch is an ideal solution for the mobile turntablist for performance or crate digging. -
- Built-in adjustable Scratch slide-switch
- User-replaceable Scratch slide-switch keeps the action going
- Protective dust cover and integrated carrying handle
- Wall-powered with included AC adapter or six batteries (not included)
- Built-in speaker
- Cartridge included
- Removable slipmat
- Class-compliant USB connection for computer recording
- Includes EZ Converter vinyl recording software
- 33 1/3, 45 and 78 RPM settings
- RCA line and headphone outputs
- 1/8" aux input with adjustable volume
UPC: 676762316415 - MIXFADER Portable Bluetooth Wireless Fader
- PT01 Scratch Review with Swiftstyle
The Mixfader - Portable Bluetooth Wireless Fader is a device designed to connect to your phone, tablet, or computer and control crossfader, pitch, and audio effects. The unit utilizes Bluetooth 4.0 and works with the free Mixfader utility app, which offers access updates, info, registration, how-to documentation, and MIDI protocol setups.
The Mixfader is compatible with a variety of DJ applications including edjing Scratch, edjing Mix, and edjing Pro, as well as music creation software and apps, such as GarageBand, Serato DJ, Virtal DJ, Ableton Live, and Traktor DJ with more titles on the way. The Mixfader is also compatible with analog turntables with real vinyl or timecode vinyl for real-time A-level scratching and performance, including the portable Vestax Handy Trax or Numark PT01.
The enclosure is made from unibody aluminum to resist shocks and provides ample weight to handle the back-and-forth movements of your hand. An adhesive and washable rubber back helps lock in the placement of the fader to any surface, allowing for sharp hand movements. Additionally, a set of 4 adhesive pads are included for attaching to your portable tablet / phone device to prevent their shake. The built-in Lithium-ion battery offers 20 hours of performance time and quickly recharges in 25 minutes. -
- Double Side Cut: Mixfader adapts to your scratching technique. Whether you scratch regular, hamster (reverse), whether you are left or right handed. Both sides of Mixfader are usable
- Timecode and Standard Audio Vinyls Compatibility: Compatible with Serato CV02 A-side and B-side; Serato Control CD; Traktor MK1 A-side and B-side, MixVibes 7 and MixVibes V2, with more to follow
- MIDI Standard: GarageBand, Traktor, Serato DJ, Mixfader fully supports the MIDI protocol and can be used with the main production software. Choose your MIDI mode and assign the control change number of your choice directly from the Companion app of Mixfader, then connect to your favorite software and let the creation begin
- Multiple Mix Faders: Connect up to 7 Mixfaders at the same time and control crossfader, pitch, audio effect
- Adhesive Backed-Rubber: Mixfader has an adhesive and washable rubber that drives it fixed, whatever the shelf. Designed to be taken everywhere, Mixfader sticks any supports and withstand the sharper hand movements. And for an optimal scratching comfort, Mixfader is also supplied with 4 adhesive pads to put under your smartphone or tablet to prevent their shake
- Built to Last: Mixfader's enclosure is made from unibody aluminum and therefore ensures an incredibly high resistance to shocks. It also provides a sufficiently high weight to handle the back-and-forth movements of your hand
- Software Settings: edjing Scratch, Mixfader's dedicated app, offers advanced features (controller interface, pro audio fx and settings, share mode) to enhance your performance and let you explore new custom setup possibilities
- Crossfader Curve Adjustment: Mixfader works like a typical DJ-mixer crossfader and then its curve can be adjusted. edjing Scratch offers a large range of crossfader shapes, like the Scratch Cut, the Slow Fade or the Dipped. Whether you are sooner tighter cut or gradual smooth fade, there's one for everyone's taste
- Hamster (Reverse) Switch: The Hamster switch lets you reverse the Mixfader usage direction. You'll love to scratch with a smart crossfader
- Cut-In Point Control: Mixfader delivers a high level of crossfader adjustment, including the possibility to customize your fader depending on your scratching technique. Set the cut-in point of your fader where you want and thus reduce or increase the dead space
- MIXFADER Dock for Numark PT01 Scratch
- PT01 Scratch Review with Swiftstyle
The Mixfader Dock replaces the switch of the Numark PT01 Scratch turntable for a permanent installation that provides the feel and grip of a full-sized crossfader. To install, simply unscrew the on-board switch and replace it with the Dock. The circular base fits perfectly on to the PT01 Scratch, allowing you to maintain a stable base no matter how hard you cut. Note: Mixfader or Numark PT01 Scratch turntable are not included. In the Box - PT01 Scratch - Portable Turntable with DJ Scratch Switch xravbareyedzwczrvasqfwcvtsfvwzxccqtt
- USB Cable
- Power Adapter
- Software Download Card
- Cartridge
- Slipmat
- Limited 1-Year Warranty
- MIXFADER - Portable Bluetooth Wireless Fader
- MIXFADER - Dock for Numark PT01 Scratch
Table of Contents
|
Upload User Manual
Have you got an user manual for the Numark PT01 Scratch - Portable Turntable Kit with Wireless Mixfader, Dock, and Case in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Numark PT01 Scratch - Portable Turntable with DJ Scratch Switch
| Minimum System Requirements (Mac) | Mac OS X 10.4.x USB 1.1 port | | Minimum System Requirements (PC) | Windows 2000/XP/Vista USB 1.1 port | | USB | Class compliant | | Connections | 2 x RCA line-level output (stereo pair)
1 x 1/4” / 6.35 mm stereo headphone output
1 x 1/8” / 3.5 mm stereo headphone output
1 x 1/8” / 3.5 mm stereo input
1 x USB port (stereo audio out) | | Speed | 33 1/3, 45, 78 rpm (45 rpm adapter included) | | Controls | Pitch, tone, gain, volume, RPM, Scratch-switch, power
Scratch-switch can be re-positioned by using a #5 screwdriver (screws have a 0.12" / 3.00 mm diameter) | | Power | Power Adapter: 12 VDC, 500 mA, center-positive
Batteries: 6 x D-cell | | Dimensions (W x D x H) | 11.9 x 11.9 x 4.0" / 302.3 x 302.3 x 101.6 mm | | Weight | 4.7 lb / 2.1 kg | | | | Box Dimensions (LxWxH) | 17.7 x 14.4 x 5.7" | - MIXFADER Portable Bluetooth Wireless Fader
| Material of Construction | Unibody aluminum
Anti-slip washable adhesive bottom | | Battery | Type: Lithium-ion
Battery Life: 20 hours
Battery Recharge Time: 25 minutes approximate | | Compatibility | Apple devices: iPhone 4S, iPad (3rd gen.), iPod Touch (5th gen.), iPad Mini (or newer)
Google Android: Android devices equipped with Bluetooth (4.0 Low Energy or higher)
Windows devices: Windows 10, Windows 10 Mobile (or newer) | | Dimensions | Not specified by manufacturer | | Weight | Not specified by manufacturer | | | | Box Dimensions (LxWxH) | 6.45 x 4.85 x 2.3" | - MIXFADER Dock for Numark PT01 Scratch
| Dimension | Not specified by manufacturer | | Weight | Not specified by manufacturer | | | | Box Dimensions (LxWxH) | 5.0 x 4.5 x 0.2" |
Rating90% users recommend this product to others. And what about you?
This product has already been rated by 93 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Honeywell Home Doorbell 916.8 MHz Product Ref: 3231665-002 Rev B...
Go Pro FETCH Dog Harness ADOGM-001...
Trijacon ACOG USMC scope...
Pyle Pro BTA 62BT 6-Zone Stereo Receiver Bluetooth...
LG Gram 17 Laptop...
|
| Discussion |
Latest contributions to the discussion:
lithium ion battery pack EN-EL5 3.7 V 1100mAh
Name: Jane Holland
Nikon EN-EL5 Lithium-Ion Battery
HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland
...
lithium ion battery pack EN-EL5 3.7 V 1100mAh
Name: Jane Holland
Nikon EN-EL5 Lithium-Ion Battery
HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland...
Settings access and setup
Name: Edwin Derks
Nuance PaperPort 14
I had a problem with Paperport loading. Through the remote efforts of a Tech was able to get back online, however, "settings" are only listed 1 - 5 with no action listed as was 'visibly' available, (i.e. Scan both sides, Black and White, Color, etc.)
1. how to change, 2. wha...
query
Name: Vudayagiri Balasubramanyam
Bose Wave SoundTouch Music System IV
how to set up my bose radio with my remote working-class ...
Hi. I didn’t even get a chance to try it once! :( plz help
Name: Eric Tasakovic
Keeley Dark Side Pedal
I ordered a dark side pedal second hand online for 20 bucks cheaper than it would have been to buy it new….20 measly bucks. Anyway…it didn’t come with a power supply. I messed up and accidentally plugged in a 9v ac output power supply in, instead of the required 9v dc. I’...
|
|
