User Manual for Oben CT-2491 Carbon Fiber Tripod and GH-30 Gimbal Head Kit Click to enlarge the picture
Contents of the user manual for the Oben CT-2491 Carbon Fiber Tripod and
- Product category: Tripods with Heads Oben
- Brand: Oben
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Oben Tripods with Heads
|
User manual for the Oben CT-2491 Carbon Fiber Tripod and contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Oben product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Oben user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Oben product will considerably shorten its lifespan!
|
Product description Time-Lapse Tips and Tools Read More This Oben CT-2491 Carbon Fiber Tripod and GH-30 Gimbal Head Kit from provides the ability to support, balance, and maneuver large telephoto lenses with fluid movement on both vertical and horizontal axes. Together, the tripod and head are suitable for sports and wildlife photography, with a combined load capacity of 39.6 lb and a maximum height of 81.5". - Oben CT-2491 Carbon Fiber Tripod The CT-2491 Carbon Fiber Tripod from Oben is an extremely sturdy support for any DSLR, mirrorless or point-and-shoot camera or camcorder. With a load capacity of 39.6 lb and a maximum height of 72.5", the tripod offers a number of advanced features that ensure its stability and reliable performance. The tripod features ergonomically designed rubber twist locks on each leg. Because legs are non-rotating, all three of a leg's locks can be disengaged at once with a single twist of the wrist. This enables extremely fast setup of the CT-2491. A thoughtful leg design makes it a simpler task to service and maintain the leg sections. With its 6x carbon fiber legs and center column, the CT-2491 is relatively lightweight (3.50 lb) and solid, ready to survive the rigors of professional work. The tripod chassis is cast aluminum alloy for further strength. The CT-2491's rapid center column extends with a twist of the butterfly knob. For protecting your camera when the column is retracted quickly, there's a rubber damper under the center-post collar. Steel locking screws underneath the collar enable you to fasten a camera head more securely. Pull-in/push-out positive leg locks allow you to set the positions of the three legs independently at three different angles. This allows you to shoot from low angles or on uneven terrain. For stability on softer terrain, the CT-2491 features metal spikes that retract and emerge by twisting the foot's rubber portion. For extreme low-angle shooting, the center column can be split into two sections with the provided hex key. The shorter column leaves no protruding parts under the tripod collar, allowing you to extend the legs out to their maximum angle. For a faster method, the center column is also easily reversible. These features are especially ideal for macro and close-up photography. The retractable metal counterweight hook serves as a stopper at the bottom of the center column.
- Ergonomically designed rubber twist locks on each leg are non-rotating so all three of a leg's locks can be disengaged at once with a single twist of the wrist enabling fast setup
- Legs with four sections tend to collapse shorter for easier portability. The CT-2491 folds to 23.3".
- Reversible 1/4"-20 & 3/8"-16 screw fits almost any head
- Bubble level on tripod chassis
- Center column is grooved to prevent its rotation
- Split center column for low angle set-up
- Spring-loaded metal counterweight hook at the bottom of the center column
- Integrated aluminum loop for attaching an optional shoulder strap
- Retractable metal spiked feet provided stability on ice and soft terrain
- Included padded carry bag features dual heavy-duty zippers, an interior pocket, and extra room to accommodate a head
UPC: 847628556706 - Oben GH-30 Gimbal Head Balance and maneuver large telephoto lenses effortlessly with the Oben GH-30 Gimbal Head. An ideal support for sports and wildlife photographers, this head is capable of handling a 44 lb payload and allows fluid movement on both vertical and horizontal axes. Because of the head's independent pan lock and 360° range of movement, it allows you to capture fast-moving objects.
- Lens Compatibility
- 70-200mm f/2.8 or f/4, 100-400mm, 150-600mm, 300mm f/4, 400mm f/5.6, 200-500mm, and other similar-sized lenses
- Weight Capacity
- The gimbal head can support, balance, and maneuver large telephoto lenses that weigh up to 44 lb
- Smooth and Fluid Motion
- Whether shooting birds, wildlife, or sports, the fluid motion and friction control built into the arm allows you to move your camera smoothly and effortlessly along either axis while tracking the subject
- Arca-type Mount
- The Arca-type compatible plate has two 1/4"-20 threaded mounts, but they are also supplied with two 3/8"-16 bushings
- 360° Panning with Independent pan Lock
- The 9" tall head rotates a full 360° and locks into place with its independent pan lock
- Duplicate Set-Ups
- Numbered scales are located on the clamp and on the swing arm, so the telephoto lens can have a repeated set up on the gimbal head
- Threaded Tripod Mount
- The gimbal head mounts directly to tripods with a 3/8"-16 threaded mount, but a reducer bushing can be utilized for smaller 1/4"-20 threads
- Material of Construction
- The gimbal head is made of aluminum and weighs 3.2 lb
UPC: 847628007345 In the Box - CT-2491 Carbon Fiber Tripod
- Padded Tripod Bag
- Shoulder Strap for Bag
- Tool Leg Clip with 2 Hex Keys
- Hex Key (for Split Center Column)
- Limited 5-Year Warranty
Table of Contents
|
Upload User Manual
Have you got an user manual for the Oben CT-2491 Carbon Fiber Tripod and GH-30 Gimbal Head Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Oben CT-2491 Carbon Fiber Tripod
| Load Capacity | 39.6 lb / 18 kg | Maximum Working Height | 72.5" / 184.2 cm | Max Height without Center Column | 62.5" / 158.8 cm | Minimum Working Height | 6" / 15.2 cm | Folded Length | 23.3" / 59.2 cm | Head Mount Type | 1/4"-20 Screw, 3/8"-16 Screw | Weight | 3.5 lb / 1.6 kg | Materials | Carbon Fiber | Bubble Level | Yes | | Leg Lock Type | Twist Lock | Independent Leg Spread | Yes | Leg Sections | 4 | Leg Diameter | 1.3" / 33 mm | Feet Features | Spiked, Retractable | | Center Column Features | Split | Center Column Sections | 2 | Center Column Extension Type | Rapid | Lateral / 90-Degree Center Column | No | | Box Dimensions (LxWxH) | 32.9 x 5.3 x 4.9" | - Oben GH-30 Gimbal Head
| Head Type | Gimbal Head | Base Mount | 3/8"-16 Thread | Camera Mounting Screw | 1/4"-20 Male & 3/8"-16 with Bushing | Quick Release Plate Type | Arca-Type | Load Capacity | 44 lb / 19.96 kg | Number of Bubble Level(s) | None | Friction Control | Yes | Independent Pan Lock | Yes | Material | Aluminum | | Panning Range | 360
Rating86% users recommend this product to others. And what about you?
This product has already been rated by 54 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Go Pro FETCH Dog Harness ADOGM-001... Trijacon ACOG USMC scope... Pyle Pro BTA 62BT 6-Zone Stereo Receiver Bluetooth... LG Gram 17 Laptop... LG 300W 2.1 ch surround sound manual. It has the soundbar, subwoofer, wireless receiver for connected rear speakers and wireless controller. ...
|
Discussion |
Latest contributions to the discussion:
lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland
... lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland... Settings access and setup Name: Edwin Derks Nuance PaperPort 14 I had a problem with Paperport loading. Through the remote efforts of a Tech was able to get back online, however, "settings" are only listed 1 - 5 with no action listed as was 'visibly' available, (i.e. Scan both sides, Black and White, Color, etc.)
1. how to change, 2. wha... query Name: Vudayagiri Balasubramanyam Bose Wave SoundTouch Music System IV how to set up my bose radio with my remote working-class ... Hi. I didn’t even get a chance to try it once! :( plz help Name: Eric Tasakovic Keeley Dark Side Pedal I ordered a dark side pedal second hand online for 20 bucks cheaper than it would have been to buy it new….20 measly bucks. Anyway…it didn’t come with a power supply. I messed up and accidentally plugged in a 9v ac output power supply in, instead of the required 9v dc. I’...
|
|