User manual
Peak Design Beginner Photography Bundle Kit

User Manual for Peak Design Beginner Photography Bundle Kit

• Product category: Camera Straps Peak Design
• Brand: Peak Design
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Peak Design Camera Straps

Product description

• Peak Design CL-2 Clutch Camera Hand Strap The Peak Design CL-2 Clutch is a camera hand strap that quickly connects and disconnects to your camera using a dyneema anchor and a tension clip. The strap that goes around your hand can easily be adjusted with your non-shooting hand to tighten it when walking, and loosen it when you need better access to your controls when shooting.
  
  An included Arca-type compatible quick release plate attaches to your camera's tripod mount, and one of the included anchors is tied into the plate. You simply slide the anchor into the link to attach the strap, and slide it out to detach it. To attach the top of the strap to the top of the camera, a custom-designed tension clip acts like a small carabiner. The strap can be adjusted from 7.1 to 11.4". UPC: 855110003409
• Peak Design Capture Camera Clip V2 The Capture Camera Clip V2 from Peak Design is a standard camera holstering system that securely holds your camera without the traditional camera strap. The system is made up of a clip and a quick release plate, which together can support up to 100 lb. The quick release plate is compatible with all Arca-type clamps. The clip can attach to any backpack strap, bag, or belt less than 3" wide. It is ideal for photographers who need their hands free and also need instant access to their camera.To use the system, attach the quick release plate to your camera, clamp the clip around a strap or belt, and secure in place by tightening the two hand-tightened bolts. Your camera slides into the clip, locks in place, and will not detach until you push the quick release button to release it from the clip.The CapturePro comes with a 4mm hex wrench for securely installing your plate on the camera and a microfiber pouch for storing your clip when it is not in use.
  • The quick release plate is compatible with any Arca-type head.
  • A safety lock can be activated by turning the release button, preventing accidental release and theft.
  • A plate locking-knob tightens down onto the plate for extra rigidity and for point-of-view video.
  • All parts are made of corrosion resistant and weatherproof materials.
  • The standard plate has dovetails on all four sides so that your camera can be mounted in the clip in any direction, making changing the lens an easy task.
  • There are four holes in the corners of the plate for attaching Micro Anchors for Peak Design's Leash and Cuff.
  UPC: 855110003119

• CL-2 Clutch Camera Hand Strap
• Standard Plate for All Capture Camera Clips
• 2 x Anchor Links
• Limited Lifetime Warranty

• Capture Camera Clip V2

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• Peak Design CL-2 Clutch Camera Hand Strap

  Strap Length	7.1 to 11.4" / 18.0 to 29.0 cm
  Strap Width	2.0" / 5.1 cm
  Lug Connector	3/8"
  Tripod Connector	1/4"-20 Male
  Material	Rubber

  Box Dimensions (LxWxH)	10.4 x 3.2 x 1.1"

• Peak Design Capture Camera Clip V2

  Material	Glass-Reinforced Nylon, Aluminum
  Dimensions	Clip: 4.1 x 2.1 x 1.1" / 10.4 x 5.2 x 2.8 cm Plate: 1.5 x 1.5 x 0.5" / 38 x 38 x 13 mm
  Weight	Clip: 3.5 oz / 100 g Plate: 0.8 oz / 2 g

  Box Dimensions (LxWxH)	5.5 x 5.2 x 1.0"

Rating

Discussion