User Manual for Pelco Sarix IME Series IME319-1VI 3MP In-Ceiling Mount Vandal-Resistant Day Night Mini Dome IP Camera with 3 to 9mm Lens Click to enlarge the picture
Contents of the user manual for the Pelco Sarix IME Series IME319-1VI 3MP
- Product category: Wired IP Cameras Pelco
- Brand: Pelco
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Pelco Wired IP Cameras
|
User manual for the Pelco Sarix IME Series IME319-1VI 3MP contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Pelco product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Pelco user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Pelco product will considerably shorten its lifespan!
|
Product description The light gray Sarix IME Series IME319-1VI 3MP In-Ceiling Mount Vandal-Resistant Day/Night Mini Dome IP Camera from Pelco features SureVision 2.0 technology, delivering high-definition (HD) resolution, consistent color accuracy, fast processing power, and simultaneous advanced low-light performance with Wide Dynamic Range (WDR), and Anti-Bloom technologies. Advanced features include 3D noise filtering, smooth response to illumination changes, and improved tone mapping to retain color accuracy and overall image contrast.
This Sarix Enhanced Range Mini Dome IP Camera features an integrated 3 to 9mm varifocal autofocus lens. Designed to install quickly, the camera includes autofocus, motorized zoom, built-in analytics, and other advanced features needed for demanding security applications. In addition, a ready-to-install in-ceiling mount is included. The camera features a sturdy metal design that is both vandal- and tamper-resistant.
The camera supports multiple simultaneous video streams with up to two different configurations. The streams can be compressed in MJPEG and H.264 formats across several resolution configurations. Realtime video with Full HD resolution using H.264 compression allows for optimized bandwidth and storage efficiency. The streams can be configured to a variety of frame rates, bit rates, and group of picture (GOP) structures for additional bandwidth administration.
This mini dome IP camera seamlessly connects to Pelco video management systems such as Endura version 2.0 (or later) and Digital Sentry version 7.3 (or later). It also integrates with major third-party video management systems through the Pelco API, and other third-party software and systems through the open ONVIF Profile S standard.
Adaptive motion detection allows the camera to record or send an alarm when there is motion in selected zones or in an entire scene. A camera sabotage alarm is triggered if the lens is obstructed or when the camera is repositioned. The Power over Ethernet (PoE) functionality reduces simplifies planning, wiring, and installation. The camera works with PoE-enabled network switches or power injectors, eliminating the need for separate power supplies and cabling, and increasing camera fail safety through an uninterruptible power supply (UPS). General - 3 to 9mm autofocus varifocal lens
- Power over Ethernet (PoE), IEEE 802.3af
- Adaptive motion detection and camera sabotage analytics
- Compatible with Pelco and third-party video systems
- ONVIF Profile S and Profile G conformant
SureVision 2.0 Technology - True Wide Dynamic Range (WDR)
- Advanced low-light performance
- Enhanced tone mapping retains color accuracy and image contrast
Mount - Single back box for suspended or hard ceiling applications
- Requires 3.25" (8.26 cm) space above ceiling
- Minimum ceiling thickness 0.38" (0.97 cm); Maximum ceiling thickness 1.5" (3.81 cm)
- 3/4" NPT or 25 mm conduit attachments on side and top of back box
- IP56 rated vandal-resistance
- Meets IK10++ (50J) standard
- Alodine aluminum construction
In the Box Pelco Sarix IME Series IME319-1VI 3MP In-Ceiling Mount Vandal-Resistant Day/Night Mini Dome IP Camera with 3 to 9mm Lens (Light Gray) In-Ceiling Mount Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Pelco Sarix IME Series IME319-1VI 3MP In-Ceiling Mount Vandal-Resistant Day Night Mini Dome IP Camera with 3 to 9mm Lens in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersPelco IME319 Specs | | | Sensor | 1/3" CMOS | | Sensor Resolution | 3MP, 2048 x 1536 | | Imager Readout | Progressive scan | | Signal to Noise Ratio | >60 dB | | Electronic Shutter | 1 to 1/77,000 sec | | Wide Dynamic Range | Up to 100 dB Sensor level is not inclusive of SureVision image processing. | | White Balance | Range: 2,000 to 10,000 K | | Sensitivity | @f/1.2, 2,850K, SNR >20 dB:
Color (33 ms): 0.1 lux
Color (500 ms): 0.005 lux
Mono (33 ms): 0.05 lux
Mono (500 ms): 0.0013 lux | | Mechanical IR Cut Filter | Yes, (On/Off/Auto selectable) with different set points on lux | | | | Type | Built-in, varifocal | | Focal Length | f/1.2, 3 to 9 mm | | Focus Type | Autofocus, motorized | | Zoom | Remote | | Auto Iris | DC drive P-iris | | Field of View | 4:3 Mode:
Diagonal: 105° (W), 38° (T)
Horizontal: 84° (W), 30° (T)
Vertical: 63° (W), 23° (T)
16:9 Mode:
Diagonal: 97° (W), 35° (T)
Horizontal: 84° (W), 30° (T)
Vertical: 47° (W), 17° (T) | | | | Streaming | Bidirectional (full or half duplex) | | Input/Output | Line level/external microphone input; 600Ω differential, 1 Vpp maximum signal level; built-in microphone | | Compression | G.711 PCM 8-bit, 8 kHz mono at 64 kb/s | | | | Video Streams | Multiple simultaneous streams with up to 2 different configurations plus service stream; the secondary stream is variable based on the setup of the primary stream | | Available Resolutions | 4:3 Aspect Ratio: 2048 x 1536 (3 MP)
1600 x 1200 (2 MP)
1280 x 960 (1.2 MP)
800 x 608 (0.5 MP)
640 x 480 (0.3 MP)
320 x 240 (0.08 MP)
16:9 Aspect Ratio: 1920 x 1080 (1080p)
1280 x 720 (720p)
800 x 448 (0.5 MP)
640 x 352 (0.2 MP)
320 x 176 (0.06 MP) | | Supported Frame Rates | Up to 30, 25, 15, 12.5, 10, 5, 1 fps (depending on the coding, resolution, and stream configuration) | | Video Encoding | H.264 High, Main, or Base profiles; MJPEG | | Bitrate Control | Constrained variable bit rate (CVBR), constant bit rate (CBR), and variable bit rate (VBR) with target range | | Stream Type | Service Stream: JPEG stream The aspect ratio will be consistent with the independent streams. | | | | Port | RJ-45 connector for 100Base-TX Auto MDI/MDI-X | | Cable Type | CAT5 or better for 100Base-TX | | Supported Protocols | TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, ARP, ICMP, and 802.1x (EAP) IPv6 supports mixed IPv4 and IPv6 installations, but not IPv6-only deployments. | | Users | Unicast: Up to 20 simultaneous users depending on the resolution settings
Multicast: Unlimited users H.264 | | Security Access | Password protected | | | | Interface | Web browser view and setup | | Languages Supported | English, French, Italian, German, Spanish, Portuguese, Russian, Chinese, Turkish | | Features | 16 window blanks, configurable in size
Password protection
Snapshot with JPEG capture at 2016 x 1523 resolution
Text overlays for camera name, time, date | | | | Supported | Unsupervised: Detects open or closed alarm state
Supervised: Detects open and short alarm state with external 1 kΩ resistor | | Input | 3.5 VDC maximum, 3.5 mA maximum | | | | Processor | Intel Core i3, 2.4 GHz | | Operating System | Microsoft Windows Vista / 7 (32-and 64-bit)
Mac OS X 10.4 | | RAM | 4 GB | | Network Interface | 100 Mb/s | | Monitor | Minimum 1024 x 768 resolution, 16 or 32-bit color | | Web Browser | Internet Explorer 7.0 (or later) or Mozilla Firefox 3.5 (or later)
Internet Explorer 8.0 (or later) is recommended for configuring analytics | | Media Player | Pelco Media Player or QuickTime 7.6.5 for Windows 7, XP, or Vista
QuickTime 7.6.4 for Mac OS X 10.4 (or later) Internet Explorer is not supported by Mac OS X 10.4; This product is not compatible with QuickTime v7.6.4 for Windows XP/Vista. If you have this version installed, you will need to upgrade to v7.6.5 | | | | Requirements | For Pelco Analytics:
Pelco Interface: WS5200 Advanced System Management
Software on an Endura 2.0 (or later) system
Open API: The Pelco API can transmit behavior alarm data to third-party applications (available on the Pelco Developer Network website) | | | | Pelco System Integration | Endura 2.0 (or later)
Digital Sentry 7.3 (or later)
DX4700/DX4800 | | Other | Open API: Pelco API or ONVIF Profile S
Mobile Application: Integrated with Pelco Mobile Application | | | | Certifications and Compliance | CE (Class A), FCC (Class A), KCC, C-Tick, CB
UL/cUL listed
Compliant with applicable immunity sections of EN 50155, EN 50121-3-2, and EN 50121-4
Cisco Medianet Media Services Proxy 2.0 compatible
ONVIF Profile S conformant
MTBF ≥200,000 POH (reporting standard is RELEX Modeling) | | | | Input Power | PoE (IEEE 802.3af, Class 3) | | Power Consumption | 8.5 W nominal | | Current Consumption | 350 mA maximum | | Relay Output | ±32 VDC maximum, 150 mA maximum | | | | Temperature | Operating: 14 to 122°F (-10 to 50°C)
Storage: 14 to 140°F (-10 to 60°C) | | Cold Start | 14°F (-10°C) | | Humidity | Operating: 20 to 80% (condensing)
Storage: 20 to 80% (non-condensing) | | Impact Resistance | K10++ (50J) per IEC 62262 | | Shock and Vibration | EN50155 CAT1, Class B; IEC 60068:2-6 and 2-27 | | | | Mount Type | In-ceiling | | Dome Attenuation | Clear: f/0.0 light loss
Smoked: f/1.0 light loss | | Pan/Tilt Adjustment | Manual: 355° pan, 180° tilt, 360° rotation | | Local Storage | microSD (Up to 32 GB with separately sold microSDHC card) | | Accessory Ports and Connectors | Micro USB type B connector for Pelco accessories | | Dimensions (Ø x H) | 7.55 x 7.87" (19.1 x 19.9 cm) | | Weight | 3.1 lb (1.4 kg) |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 91 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
