User Manual for Pelco Spectra Enhanced Series 20x Stainless Steel Network Pendant Dome Camera Click to enlarge the picture
Contents of the user manual for the Pelco Spectra Enhanced Series 20x Stainless
- Product category: Wired IP Cameras Pelco
- Brand: Pelco
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Pelco Wired IP Cameras
|
User manual for the Pelco Spectra Enhanced Series 20x Stainless contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Pelco product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Pelco user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Pelco product will considerably shorten its lifespan!
|
Product description The Spectra Enhanced Series 20x Stainless Steel Network Pendant Dome Camera from Pelco features a B6-PSG-E Back Box, an LDHDSS-1 smoked bubble lower dome, and a D6220 20x dome drive. The light gray and black dome camera offers quality images with a wide dynamic range (WDR) imaging system, 60 images per second video, electronic image stabilization, and features such as image defog and Pelco's full suite of behavioral analytics. These features, along with 130 dB WDR, make the camera system suitable to detecting and capturing details such as faces, license plates, tattoos, and other features. This dome camera is compatible with Pelco's VideoXpert video management system while maintaining backward compatibility with Pelco's legacy Endura and Digital Sentry VMS platforms. Using H.264 compression, Spectra Enhanced can store up to 32GB of still images or video on a compatible SD card (not supplied) that is accessible through the ONVIF Profile G protocol or FTP. The camera features open-architecture connectivity for third-party VMS and recording solutions and an application programming interface (API) and software developer's kit (SDK) for integration into virtually any IP-based system. Nine Pelco behaviors are preloaded and included as standard features, including Abandoned Object, Adaptive Motion Detection, AutoTracker, Camera Sabotage, Directional Motion, Loitering Detection, Object Counting, Object Removal, and Stopped Vehicle. Pelco behaviors can be configured and enabled using a standard web browser, and they are compatible with Endura or a third-party system that supports alarms using Pelco's API. Window blanking is used to conceal user-defined privacy areas that cannot be viewed by an operator. This Spectra Enhanced camera supports up to 32 blanked windows. It connects to Pelco IP and hybrid systems, such as VideoXpert, Endura version 2.0 (or later), and Digital Sentry version 7.3 (or later). The camera is also compatible with Digital Sentry NVS (DS NVS), a full-featured video management software, which is available as a free download the Pelco website. DS NVs includes four free Pelco IP licenses and allows for the management of video from up to 64 cameras. - Camera
-
- Up to 1920 x 1080 resolution at up to 60 fps at 16:9 aspect ratio and 130 dB WDR
- 360° continuous pan rotation at 430°/sec
- Full functionality using Power over Ethernet (HPoE and PoE+)
- Low latency for improved pan and tilt drivability
- Defog mode provides three levels of fog removal within the image for improved image quality
- Vivid mode can be turned on/off to improve the image contrast and color saturation
- Electronic Image Stabilization (EIS)
- 16 preset tours, 256 dome presets, 32 window blanks
- Full suite of built-in analytics including autotracker, adaptive motion detection, abandoned object, and more
- Two simultaneous video streams, Dual H.264 or H.264 and scalable MJPEG
- ONVIF Profile S and Profile G conformant
- Local storage through 32GB microSD card (not supplied)
- Environmental Pendant Housing
-
- Light gray finish, RAL9002
- All stainless steel construction, acrylic bubble
- Type 4X and IP66 rated for outdoor use
- Uses 1.5” NPT Thread
- Includes sun shield, heater, and blower
- -50 to 122°F (-45 to 50°C) sustained operating temperature
- Software
-
- 256 Presets with ±0.1° preset accuracy and 16 tours
- Multilingual menus
- Password protection
- 32 Window blanks, configurable in size
- Auto Flip feature rotates dome 180° at bottom of tilt travel
- Configurable park with actions
- Proportional pan/tilt continually decreases pan/tilt speeds in proportion to depth of zoom
- Pelco analytics including nine user-configurable behaviors
- Defog modes
UPC: 700880333808 In the Box Pelco Spectra Enhanced Series 20x Stainless Steel Network Pendant Dome Camera (Smoked Bubble) Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Pelco Spectra Enhanced Series 20x Stainless Steel Network Pendant Dome Camera in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersPelco Spectra Enhanced Specs | | | Image Sensor | 1/2.8" type Exmor CMOS | | Lens | Focal length 4.7 (wide) to 94mm (tele) | | Aperture | f/1.6 to 3.5 | | Zoom | 20x optical, 12x digital | | Maximum Resolution | 1920 x 1080 | | Horizontal Angle of View | 55.4 (wide) to 2.9° (tele) | | Aspect Ratio | 16:9 | | Sensitivity | Color (33 ms): 0.20 lux
Color (250 ms): 0.025 lux
Mono (33 ms): 0.06 lux
Mono (250 ms): 0.008 lux
| | Day/Night Mode | IR cut filter | | Wide Dynamic Range | 130 dB | | Iris Control | Automatic iris with manual override | | Gain Control | Automatic | | Noise Reduction | Active Noise Filtering | | Image Stabilization | Electronic Image Stabilization (EIS) | | | | Video Encoding | H.264 high, main, or base profile and MJPEG | | Video Streams | Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream | | Frame Rate | Up to 60, 50, 30, 25, 15, 12.5, 10, 8.333, 7.5, 6, 5, 4, 3, 2.5, 1 (dependent upon coding, resolution, and stream configuration) | | Available Resolutions | H.264 High Profile (IP GOP structure)
1920 x 1080 (2.07 MP), 16:9 at 60 fps / 8 Mb/s bit rate
1920 x 1080 (2.07 MP), 16:9 at 60 fps / 6.05 Mb/s bit rate
1280 x 720 (0.92 MP), 16:9 at 60 fps / 3 Mb/s bit rate
800 x 448 (0.36 MP), 16:9 at 60 fps / 2 Mb/s bit rate
640 x 352 (0.23 MP), 16:9 at 60 fps / 1.8 Mb/s bit rate | | Video Motion Detection | Simple motion detection and camera sabotage | | Local Storage | 32 GB microSD card slot (card not included)
Capture 1, 5-, or 10-second video clips on camera sabotage, motion detection, or alarm input; record video continuously in the case of network outage with option to overwrite; access video through FTP protocol and ONVIF Profile G | | | | Supported Protocols | TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, and 802.1x (EAP) | | Users | Unicast: Up to 20 simultaneous users depending on resolution settings (2 guaranteed streams)
Multicast: Unlimited users H.264 | | Security Access | Password protected | | Software Interface | Web browser view and setup | | Pelco System Integration | Endura 2.0 (or later), Digital Sentry 7.3 (or later) | | API Integration | Pelco API or ONVIF Profile G and Profile S | | Mobile Application Support | Integrated to Pelco Mobile App | | Minimum System Requirements | Processor Intel Core: i3 Processor, 2.4 GHz
Operating System Windows: 7 (32-bit and 64-bit) with DirectX 11, XP Service Pack 3 with DirectX 9.0c, or Mac OS X 10.4 (or later)
Memory: 4 GB RAM
Network Interface Card 100 MB (or greater)
Monitor: Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
Web Browser: Internet Explorer 8.0 (or later) or Firefox 3.5 (or later); Internet Explorer 8.0 (or later) is recommended for configuring analytics
Media Player: Pelco Media Player or QuickTime 7.6.5 for Windows XP and 7 or QuickTime 7.6.4 for Mac (or later) | | System Requirements | Pelco Interface: WS5200 Advanced System Management Software on an Endura 2.0 (or later) system (not included)
Open API: The Pelco API can transmit behavior alarm data to third-party applications, available on the Pelco site | | Language Support | English, Spanish, Portuguese, Italian, German, French, Russian, Turkish, Arabic, Simplified Chinese, and Korean | | | | Variable Speed | 0.1 to 80°/sec (manual pan speed) | | Preset Accuracy | ±0.1° | | Pan Movement | 360° continuous pan rotation | | Vertical Tilt | 1 to -90° | | Pan Speed | Up to 450°/sec | | Tilt Speed | Up to 450°/sec | | Manual Pan/Tilt Speeds | Pan: 0.1 to 80°/sec manual operation
Tilt 0.1 to 45°/sec manual operation | | Preset Speeds | Pan: 450°/sec
Tilt: 450°/sec | | | | Ports | RJ45 connector for 100Base-TX
Auto MDI/MDI-X
Auto negotiate/Manual setting | | Cabling Type | CAT5e or better for 100Base-TX | | Input Voltage | 18 to 32 VAC; 24 VAC nominal
22 to 27 VDC; 24 VDC nominal | | Input Power | 24 VAC: 24 VA nominal (without heater and blower); 81 VA nominal (with heater and blower)
24 VDC: 1 A nominal (without heater and blower); 3 A nominal (with heater and blower)
PoE+: 18 W (with heater)
HPoE: 60 W (with heater) | | | | Construction | Back Box: 316 stainless steel; polyurethane powder-coated finish
Lower Dome: 316 stainless steel; polyurethane powder-coated finish
Bubble: Acrylic, clear | | Light Attenuation | f/0.0 light loss | | Cable Entry | Back Box: Through 1.5" NPT pendant mount | | Certifications | CE, Class A
FCC, Class A
UL/cUL Listed
C-Tick
KC
ONVIF Profile S, ONVIF Profile G
Cisco Medianet Media Services Proxy 2.0 compatible
IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, IEC 60068-2-30, and IEC 60068-2-78
IEC 60068-2-6 and IEC 60068-2-27
Meets NEMA Type 4X and IP66 standards when installed properly
U.S. Patents: 5,931,432; 6,793,415 B2; 6,802,656 B2; 6,821,222 B2; 7,161,615 B2 | | Operating Temperature | Sustaining:
24 VAC & HPoE: -49 to 122°F (-45 to 50°C)
PoE+: -4 to 122°F (-20 to 50°C)
Absolute:
24 VAC: -60 to 140°F (-50 to 60°C) HPoE & PoE+: 140°F (60°C)
Ice Free:
24 VAC & HPoE: -22°F (-30°C)
PoE+: 14°F (-10°C)
Cold Start: Cold starts within 90 minutes at specified temperature
24 VAC: -40°F (-40°C)
HPoE: -31°F (-35°C)
PoE+: 14°F (-10°C)
De-Icing: Removes icing of 0.1" (2.5 mm) within 3 hours after power-up
24 VAC & HPoE: -30°C (-22°F)
Assumes no wind chill factor
PEO75U Injector required for heater operation over HPoE (not included) | | Operating Humidity | 10 to 100% RH (condensing) | | Effective Projected Area (EPA) | 20.5 square inches (without mount), 47 square inches (with IWM Series mount) | | Dimensions (Ø x H) | 9.4 x 10.6" (23.8 x 26.9 cm) | | Weight | 14.3 lb (6.5 kg) |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 58 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
